A new MnII4MnIII4 cluster from the use of methyl 2-pyridyl ketone oxime in manganese carboxylate chemistry: Synthetic, structural and magnetic studies

A new MnII4MnIII4 cluster from the use of methyl 2-pyridyl ketone oxime in manganese carboxylate chemistry: Synthetic, structural and magnetic studies

Polyhedron 27 (2008) 3703–3709 Contents lists available at ScienceDirect Polyhedron journal homepage: www.elsevier.com/locate/poly A new MnII4MnIII...

367KB Sizes 2 Downloads 20 Views

Polyhedron 27 (2008) 3703–3709

Contents lists available at ScienceDirect

Polyhedron journal homepage: www.elsevier.com/locate/poly

A new MnII4MnIII 4 cluster from the use of methyl 2-pyridyl ketone oxime in manganese carboxylate chemistry: Synthetic, structural and magnetic studies Constantinos C. Stoumpos a, Theocharis C. Stamatatos b, Vassilis Psycharis c, Catherine P. Raptopoulou c, George Christou b,*, Spyros P. Perlepes a,* a

Department of Chemistry, University of Patras, GR-265 04 Patras, Greece Department of Chemistry, University of Florida, Gainesville, FL 32611-7200, USA c Institute of Materials Science, NCSR ‘‘Demokritos”, GR-153 10 Aghia Paraskevi Attikis, Greece b

a r t i c l e

i n f o

Article history: Received 26 July 2008 Accepted 13 September 2008 Available online 24 October 2008 Keywords: Crystal structures Magnetochemistry Manganese benzoate chemistry Methyl 2-pyridyl ketone oxime metal complexes Mixed-valent manganese clusters

a b s t r a c t The use of methyl 2-pyridyl ketone oxime (mpkoH) in manganese benzoate chemistry is reported. The reaction of Mn(O2CPh)2  2H2O with two equivalents of mpkoH in CH2Cl2 affords the mononuclear complex [MnII(O2CPh)2(mpkoH)2] (2) in high yield. The MnII atom is coordinated by two monodentate PhCO2  groups and two N,N0 -bidentate mpkoH chelates in a cis–cis–trans fashion. Reaction mixtures comprising II III (NBun4)[MnIII 4 O2(O2CPh)9(H2O)] and mpkoH in CH2Cl2, [Mn Mn2 O(O2CPh)6(py)2(H2O)] and mpkoH in n CH2Cl2, or Mn(O2CPh)2  2H2O, NBu 4 MnO4 and mpkoH in MeOH/MeCN/CH2Cl2 all lead to the mixedvalent cluster [MnII4MnIII 4 O2(OH)2(O2CPh)10(mpko)4] (3) in moderate yields. The cluster molecule has the [Mn8(l4-O)2(l3-OH)2]14+ core (another description of the core is [Mn8(l4-O)2(l3-OH)2(l-OR00 )4(lONR000 )4]6+). Peripheral ligation is provided by two g1, four g1:g1:l and four g1:g2:l3 PhCO2  groups, as well as four g1:g1:g1:l mpko ligands. Variable-temperature, solid-state dc and ac magnetic studies were carried out on complex 3 in the 5.0–300 K (dc) and 1.8–10 K (ac) ranges. The data reveal dominant antiferromagnetic interactions and a resulting S = 0 ground state, which is rationalized in terms of the 2þ subunit. strong antiferromagnetic coupling within the central fMnIII 2 O2 g Ó 2008 Elsevier Ltd. All rights reserved.

1. Introduction The last two decades have witnessed a tremendous growth in the interest in polynuclear manganese carboxylate compounds (clusters) with oxygen- and nitrogen-based ligation. This has been mainly due to their relevance to two fields, bioinorganic chemistry and molecular magnetism, as well as to the architectural beauty and aesthetically pleasing structures they possess. Mn ions and biological carboxylate ligands are found at the active sites of several redox enzymes, the most fascinating of which is the water-oxidizing complex (WOC) on the donor side of photosystem II in green plants and cyanobacteria [1]; thus, bioinorganic chemists have been trying to recreate with synthetic models the structure, spectroscopic properties and/or function of the active sites of such enzymes [2], and especially so of the {Mn4CaOx} cluster unit that is present in the WOC. In the molecular magnetism arena, Mn carboxylate clusters containing MnIII have been found to often have large ground state spin (S) values, which combined with a large and negative magnetoanisotropy (as reflected in a large and nega-

* Corresponding authors. Tel.: +1 352 392 6737; fax: +1 352 392 8757 (G. Christou); tel.: +30 2610 997146; fax: +30 2610 997118 (S.P. Perlepes). E-mail addresses: [email protected]fl.edu (G. Christou), [email protected] (S.P. Perlepes). 0277-5387/$ - see front matter Ó 2008 Elsevier Ltd. All rights reserved. doi:10.1016/j.poly.2008.09.010

tive zero-field splitting parameter, D) have led to some of these complexes being able to function as single-molecule magnets (SMMs) [3]. SMMs are individual molecules or ions that behave as nanoscale magnets below a certain (‘‘blocking”) temperature, and thus represent a molecular, ‘bottom-up’ approach to nanomagnetism. Scientists around the world are currently seeking to raise the blocking temperature in SMMs and extend this phenomenon as far as possible [4]. For the above and other reasons, there continues to be a great need for new synthetic methods [5] and reaction systems (with suitable organic ligands) to new examples of Mn carboxylate clusters. With this in mind, we have been exploring reactions of 2-pyridyl oximes (Fig. 1) with various Mn carboxylate sources [6–11]. There is currently a renewed interest in the coordination chemistry of oximes, with the efforts of several research groups being driven by a number of considerations [12]. 2-Pyridyl oximes [13] are a subclass of oximes whose anions are versatile ligands for a variety of research objectives (including l2 and l3 behaviour) and have been central players in several areas of molecular magnetism including single-molecule and single-chain magnetism [12c,13,14]. We recently reported, for example, the employment of mpkoH in Mn carboxylate chemistry, which gave the initial examples of triangular MnIII SMMs by switching the exchange coupling from the more usual antiferromagnetic to ferromagnetic

3704

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709

R = H; paoH R = Me; mpkoH

R

R = Ph; ppkoH

C N N

OH

R= N

; (py)pkoH

Fig. 1. General structural formula and abbreviations of the 2-pyridyl oximes that are used in our laboratories, including methyl 2-pyridyl ketone oxime (mpkoH) employed in this work.

[9–11]. As an extension to this work, we have now asked if other products might result from the Mn=R0 CO2  =mpkoH reaction system. Four years ago, we described in detail the synthesis and structural, spectroscopic and magnetochemical characterization of the remarkable cluster [MnII4MnIII 4 O2(OH)2(O2CPh)10(ppko)4] (1) and showed that it has a S = 0 ground state [7]. We have wondered if the mpko analogue of 1 could be prepared and have thus pursued its synthesis. There are two reasons to prepare such a complex: (i) to determine if it would be isostructural with 1 and be isolated at the same oxidation level, and (ii) if it is isostructural, to assess any influence of the Me versus Ph difference on magnetochemical properties. We herein report the successful development of synthetic procedures to prepare the mpko analogue of 1 and describe its characterization. 2. Experimental 2.1. General and physical measurements All manipulations were performed under aerobic conditions using materials (reagent grade) and solvents as received. Mn(O2CPh)2  2H2O [15a], NBun4MnO4 [15b], (NBun4)[MnIII4O2 (O2CPh)9(H2O)] [15a] and [Mn3O(O2CPh)6(py)2(H2O)] [16] were synthesized according to published methods. Elemental analyses (C, H, N) were performed by the in-house facilities of the University of Florida Chemistry Department. IR spectra (4000–400 cm1) were recorded on Perkin–Elmer 16 PC and Nicolet Nexus 670 FTIR spectrometers with samples prepared as KBr pellets. Variable-temperature dc and ac magnetic susceptibility data were collected at the University of Florida using a Quantum Design MPMS-XL SQUID susceptometer equipped with a 7 T magnet. The sample was embedded in eicosane to prevent torquing. Diamagnetic corrections were applied to the observed paramagnetic susceptibilities using Pascal’s constants. 2.2. Compound preparation 2.2.1. [Mn(O2CPh)2(mpkoH)2] (2) Solid mpkoH (0.082 g, 0.60 mmol) was added to a pale pink solution of Mn(O2CPh)2  2H2O (0.100 g, 0.30 mmol) in CH2Cl2 (30 mL). The solid soon dissolved to give a yellow solution. The solution was stirred for 30 min and layered with Et2O/n-hexane (1:1 v/v, 60 mL). After 1 d, X-ray quality, yellow prismatic crystals of the product were collected by filtration, washed with Et2O (2  2 mL), and dried in air. Yield: 85%. Anal. Calc. for C28H26MnN4O6: C, 59.05; H, 4.61; N, 9.84. Found: C, 58.97; H, 4.32; N, 9.72%. IR (KBr, cm1): 3488mb, 3065w, 1599s, 1543s, 1478m, 1437m, 1404s, 1327m, 1255w, 1170w, 1137w, 1098w, 1047s, 1024m, 964w, 834w, 786s, 720s, 684m, 674s, 636w, 563w, 452m, 406w. 2.2.2. [Mn8O2(OH)2(O2CPh)10(mpko)4] (3) 2.2.2.1. Method A. To a deep red solution of (NBun4)[MnIII 4 O2(O2CPh)9(H2O)] (0.160 g, 0.10 mmol) in CH2Cl2 (30 mL) was

added solid mpkoH (0.054 g, 0.40 mmol). The resulting dark brown solution was stirred for 30 min, during which time no further colour change occurred. The solution was filtered and the filtrate layered with Et2O/n-hexane (1:1 v/v, 60 mL). After 2 d, dark red prismatic crystals of 3  1.8CH2Cl2  1.8Et2O were collected by filtration, washed with cold Et2O (2  2 mL), and dried in air. Yield: 60%. The air-dried sample analyzed as 3  2H2O. Anal. Calc. for C98H84Mn8N8O30: C, 51.32; H, 3.70; N, 4.88. Found: C, 51.51; H, 3.84; N, 4.83%. IR (KBr, cm1): 3435mb, 3063w, 2921w, 1597s, 1553s, 1491w, 1484w, 1447m, 1404s, 1317w, 1273w, 1175w, 1151w, 1098w, 1068m, 1046m, 1025m, 934w, 820w, 778m, 718s, 689w, 676m, 639w, 604m, 537w, 457w. 2.2.2.2. Method B. Treatment of a stirred, dark brown solution of [Mn3O(O2CPh)6(py)2(H2O)] (0.108 g, 0.10 mmol) in CH2Cl2 (30 mL) with solid mpkoH (0.027 g, 0.20 mmol) gave a solution of essentially the same colour. This was stirred for 30 min and layered with Et2O (60 mL). Slow mixing gave dark red prismatic crystals which were collected by filtration, washed with Et2O (2  3 mL) and dried in air. Yield: 40%. The IR spectrum of the product was identical with that of the authentic material prepared by Method A. 2.2.2.3. Method C. Treatment of a stirred, pale pink solution of Mn(O2CPh)2  2H2O (0.100 g, 0.30 mmol) in MeOH/MeCN (15 mL, 1:2 v/v) with solid NBun4MnO4 (0.040 g, 0.12 mmol) resulted in a dark brown solution. Solid mpkoH (0.040 g, 0.29 mmol) was slowly added to the solution, and it soon dissolved to give a somewhat darker solution that was stirred for a further 20 min. The solvents were then evaporated under reduced pressure. The dark brown residue was dissolved in CH2Cl2 (30 mL), filtered and the essentially black filtrate layered with Et2O (60 mL). Slow mixing gave dark red crystals of the product after 4 d, which were collected by filtration, washed with cold CH2Cl2 (2  2 mL) and Et2O (5 mL), and dried in air. Yield: 35%. The IR spectrum of the product was identical with the spectra of the material from Methods A and B. The purity of the sample prepared from this method was also confirmed by microanalytical data. 2.3. Single-crystal X-ray crystallography The crystallographic data and structure refinement details for the two complexes are summarized in Table 1. A selected crystal of 2 (0.07  0.35  0.66 mm) was mounted in air. Diffraction measurements were made on a Crystal Logic Dual Goniometer diffractometer using graphite-monochromated Mo radiation. Unit cell dimensions were determined and refined by using the angular settings of 25 automatically centered reflections in the range 11° < 2h < 23°. Intensity data were recorded using a h–2h scan to a maximum 2h value of 50°. Three standard reflections monitored every 97 reflections showed less than 3% variation and no decay. Lorentz, polarization corrections were applied using CRYSTAL LOGIC software. The structure was solved by direct methods using SHEL2 XS-97 [17a] and refined on F by full-matrix least squares techniques with SHELXL-97 [17b]. All H atoms were located by Fourier difference maps and refined isotropically. All non-H atoms were refined anisotropically. A selected crystal of 3  1.8CH2Cl2  1.8Et2O (0.28  0.30  0.55 mm), prepared by Method A, was taken from the mother liquor, mounted, and immediately cooled to 103(2) K. Data were collected on a Rigaku R-AXIS SPIDER Image Plate diffractometer using graphite-monochromated Mo radiation. Data collection (xscans) to a maximum 2h value of 51° and processing (cell refinement, data reduction and empirical absorption correction) were performed using the CRYSTALCLEAR program package [17c]. The structure was solved by direct methods using SHELXS-97 [17a] and

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709 Table 1 Crystallographic data for complexes 2 and 3  1.8CH2Cl2  1.8Et2O Parameter

2

3  1.8CH2Cl2  1.8Et2O

Formula Formula weight Crystal system Space group a (Å) b (Å) c (Å) a (°) b (°) c (°) V (Å3) Z qcalc (g cm3) Radiation, k (Å) Temperature (K) l (mm1) Data collected/unique (Rint) Data with I > 2r(I) R1 (I > 2r(I))a wR2 (I > 2r(I))b

C28H26MnN4O6 569.47 triclinic  P1 11.013(4) 11.608(5) 11.265(5) 97.50(1) 95.34(1) 98.19(1) 1404.1(10) 2 1.347 Mo Ka, 0.71073 298 0.517 5270/4954 (0.0137) 4221 0.0390 0.1024

C107H101.60Mn8N8O29.80Cl3.60 2543.50 monoclinic C2/c 31.320(4) 15.565(2) 24.495(3) 90 109.49(1) 90 11257(3) 4 1.501 Mo Ka, 0.71069 103 1.031 40 112/10 405 (0.0613) 8314 0.0831 0.1973

3705

The second procedure to 3 gave a lower yield and involved the reaction of [MnIIMnIII 2 O(O2CPh)6(py)2(H2O)] [16] with two equivalents of mpkoH in CH2Cl2. Many synthetic procedures to make polynuclear manganese carboxylate clusters rely on the reactions of triangular [Mn3O(O2CR)6LxL0 y]0/+ species (x + y = 3) with a potentially chelating/bridging ligand [5b,11]. The formation of 3 by this method can be summarized in Eq. (3). As stated above, it is not uncommon to find MnIII – a strong oxidizing agent – being reduced by ligand groups, solvent impurities, etc.: þ 8½MnII MnIII 2 OðO2 CPhÞ6 ðpyÞ2 ðH2 OÞ þ 12mpkoH þ 4H þ4e

! 3½MnII4 MnIII 4 O2 ðOHÞ2 ðO2 CPhÞ10 ðmpkoÞ4  þ 18PhCO2 H

þ 16py þ 4H2 O

ð3Þ

Three procedures to complex 3 were developed. The  first (and best) involves the conversion of [MnIII 4 O2(O2CPh)9(H2O)] into a higher nuclearity product. The anion, which contains only PhCO2  and H2O ligands [15a], is a very useful starting material for the synthesis of higher nuclearity clusters [15a,18]. Thus, treat ment of the NBun 4 þ salt of [MnIII 4 O2(O2CPh)9(H2O)] with an excess of mpkoH in CH2Cl2 led to pure crystalline 3 in good yields (60%) upon layering of the reaction solution with precipitation solvents. The formation of 3 is summarized in Eq. (2). The 4MnII, 4MnIII description of 3 requires the reduction of four MnIII ions to have occurred. The source of the reducing agent is probably an

Once the identity of 3 had been established, we also sought its synthesis from simpler starting materials, and we found that it can be prepared by the comproportionation between Mn(O2CPh)2.2H2O and NBun4MnO4 [15b] in a 2.5:1 ratio in the presence of mpkoH in MeOH/MeCN. Such comproportionation reactions between MnII and MnVII sources in the presence of appropriate ligand groups have found extensive prior use to produce clusters of several nuclearities at various Mn oxidation levels [11,15a,19]. The ratio employed in this work gives, on paper, an average Mn oxidation state in solution of Mn+3.4, higher than that (Mn+2.5) observed in solid 3, but the MeOH can act as reducing agent. The yield was only 35%, and it is possible there are other products in the coloured filtrates. We also explored higher MnII:MnVII ratios, but this led to 3 contaminated with [MnII4MnIII 2 O2(O2CPh)10(MeCN)4}] [20] containing no bound mpko groups. Note that the MnðO2 CPhÞ2  2H2 O=MnO4  =mpkoH and [Mn3O(O2CPh)6(py)2(H2O)]/mpkoH reaction systems in EtOH or MeOH/MeCN/CH2Cl2 in the presence of appropriate counterions (e.g. ClO4  ) have led to salts of the [Mn3O(O2CPh)3(mpko)3]+ cation, which were amongst the first examples of SMMs with a triangular structure [9,11]. Thus, it is likely, as with many other reactions in higher oxidation state Mn chemistry, that the reaction solution contains a complicated mixture of several species in equilibrium, with factors such as relative solubilities, absence/presence of counterions, lattice energies, crystallization kinetics and others determining the identity of the isolated product [19]. The presence of neutral oxime groups in 2 is manifested by a broad IR band of medium intensity at 3488 cm1, assigned to m(OH)oxime [6,21]. The IR spectrum of 3 exhibits a medium band at 3435 cm-1 assignable [22] to mðOHÞOH . The broadness and relatively low wavenumber of these bands are both indicative of hydrogen-bonding. A medium-intensity band at 604 cm1 is present in the spectrum of 3; this band, which is absent from the spectrum of 2, is tentatively assigned to a vibration involving a MnIII–O 2 stretch [23]. The m(CO2) bands are difficult to assign in the spectra of 2 and 3 due to the appearance of overlapping carboxylate, phenyl, 2-pyridyl and oxime/oximate stretching vibrations in the 1600–1400 cm1 region [24] and thus the application of the spectroscopic criterion of Deacon and Phillips [25] is very difficult.

 2½MnIII 4 O2 ðO2 CPhÞ9 ðH2 OÞ

3.2. Description of structures

a b

P P R1 = (|Fo|  |Fc|)/ (|Fo|). P P wR2 ¼ f ½wðF 2o  F 2c Þ2 = ½wðF 2o Þ2 g1=2 .

refined by full-matrix least squares techniques on F2 with SHELXL-97 [17b]. All H atoms were introduced at calculated positions and refined as riding on their bound atoms. All non-H atoms were refined anisotropically. Two of the benzoates as well as the solvate molecules were found disordered and refined in two orientations with occupancies adding up to 100%. 3. Results and discussion 3.1. Syntheses and IR spectroscopy The preparation of pure 2 in excellent yield was achieved by the reaction of Mn(O2CPh)2  2H2O with two equivalents of mpkoH in CH2Cl2, see Eq. (1): CH2 Cl2

MnðO2 CPhÞ2  2H2 O þ 2mpkoH ! ½MnðO2 CPhÞ2 ðmpkoHÞ2  þ 2H2 O ð1Þ MnII4MnIII 4

þ4e

þ 4mpkoH ! ½MnII4 MnIII 4 O2 ðOHÞ2 ðO2 CPhÞ10 ðmpkoÞ4  

þ 2PhCO2 H þ 6PhCO2 þ 2H2 O

ð2Þ

impurity of the solvent or excess ligand groups, facilitated by the strongly oxidizing nature of MnIII [15a]. An alternative means for the generation of the MnII ions in 3 might be disproportionation of MnIII, in which case MnIV-containing species would be present in the coloured filtrate [15a]. We have not attempted to identify the exact origin of the MnII ions in the product, nor would it be a simple investigation.

The molecular structures of complexes 2 and 3 are depicted in Figs. 2 and 3, respectively. Selected interatomic distances and angles are listed in Tables 2 and 3.  Its strucComplex 2 crystallizes in the triclinic space group P 1. ture consists of well-separated [Mn(O2CPh)2(mpkoH)2] molecules. The MnII center is coordinated by two monodentate PhCO2  groups and two N,N0 -chelating (g2) mpkoH ligands. The mpkoH donor atoms are the nitrogen atoms of the neutral oxime and the 2-pyridyl groups. The six-coordinate molecule is the cis–cis–trans isomer

3706

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709 Table 2 Selected bond lengths (Å) and angles (°) for complex 2

Fig. 2. Partially labelled plot of complex 2. The dashed lines are H-bonds. Colour scheme: MnII, yellow; O, red; N, green; C, gray; H, purple. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

with respect to the disposition of the benzoate oxygen, pyridyl nitrogen and oxime nitrogen atoms, respectively. The cis arrangement of the oxime groups seems unfavorable, probably due to the steric hindrance arising from the Me groups upon oxime coordination. The molecule has no imposed symmetry, although it closely approximates C2 symmetry, with the pseudo C2 axis bisecting the O(21)–Mn–O(31) angle. The main distortion from octahedral geometry is due to the small bite angles of the mpkoH chelates (70.2°, 70.6°). There are very strong intramolecular H-bonds between unbound oxime –OH groups and the unbound benzoate O atoms (O(22), O(32)). The dimensions are: O(1)  O(21) 2.542(4) Å, HO(1)  O(22) 1.650(4) Å, O(1)–HO(1)  O(22) 178.9(1)° and O(11)  O(32) 2.535 Å, HO(11)  O(32) 1.672(5) Å,

Mn–O(21) Mn–O(31) Mn–N(1) Mn–N(2) Mn–N(11)

2.104(2) 2.083(2) 2.302(2) 2.273(2) 2.287(2)

Mn–N(12) C(27)–O(21) C(27)–O(22) C(37)–O(31) C(37)–O(32)

2.282(2) 1.259(3) 1.241(4) 1.244(3) 1.232(3)

O(21)–Mn–O(31) O(21)–Mn–N(1) O(21)–Mn–N(2) O(21)–Mn–N(11) O(21)–Mn–N(12) O(31)–Mn–N(1) O(31)–Mn–N(2) O(31)–Mn–N(11)

88.4(1) 169.1(1) 99.1(1) 88.5(1) 102.8(1) 92.9(1) 105.7(1) 165.0(1)

O(31)–Mn–N(12) N(1)–Mn–N(2) N(1)–Mn–N(11) N(1)–Mn–N(12) N(2)–Mn–N(11) N(2)–Mn–N(12) N(11)–Mn–N(12)

95.9(1) 70.2(1) 92.9(1) 87.8(1) 89.3(1) 149.6(1) 70.6(1)

O(11)–HO(11)  O(32) 170.5(1)°. Complex 2 joins a very small family of [MnII(O2CR0 )2(L–L)2] complexes (L–L = neutral 2-pyridyl oximes) with an analogous cis–cis–trans arrangement of the donor atoms [6–8]. Complex 3  1.8CH2Cl2  1.8Et2O crystallizes in the monoclinic space group C2/c. Its structure consists of the [Mn8O2(OH)2(O2CPh)10(mpko)4] molecule and solvate CH2Cl2 and Et2O molecules; the latter will not be further discussed. The molecule lies on a crystallographic twofold axis. The eight Mn ions are held together by two l4-O2 (O(71), O(710 )) and two l3-OH (O(72), O(720 )) groups to give a [Mn8(l4-O)2(l3-OH)2]14+ core (Fig. 4). Bond-valence sum (BVS) calculations [26] give values of 1.8 and 1.2 for O(71) and O(72), respectively, supporting their assignments as oxo and hydroxo oxygen atoms (Table 4). Peripheral ligation is provided by two monodentate (g1) PhCO2  (those containing the ligating atoms O(51) and O(510 )), four syn,syn-g1:g1:l PhCO2  (those containing O(41)/O(42), O(61)/O(62) and their symmetryrelated partners), four g1:g2:l3 PhCO2  groups (those containing O(21)/O(22), O(31)/O(320 ) and their symmetry-related partners)

Fig. 3. Partially labelled plot of the Mn8 molecule of complex 3. Primed and unprimed atoms are related by the crystallographic two-fold axis. O(71) and O(710 ) are the oxide ions, and O(72) and O(720 ) are the hydroxide O atoms. Colour scheme: MnII, yellow; MnIII, blue; O, red; N, green; C, gray. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709

3707

Table 3 Selected interatomic distances (Å) and angles (°) for complex 3  1.8CH2Cl2  1.8Et2O Mn(1)  Mn(2) Mn(1)  Mn(3) Mn(1)  Mn(4) Mn(2)  Mn(3) Mn(2)  Mn(4) Mn(3)  Mn(4) Mn(2)  Mn(20 ) Mn(4)  Mn(40 ) Mn(1)–O(11) Mn(1)–O(42) Mn(1)–O(71) Mn(1)–O(72) Mn(1)–N(1) Mn(1)–N(2) Mn(2)–O(10 ) Mn(2)–O(22)

3.870(6) 3.290(2) 3.531(6) 3.189(1) 5.346(2) 3.365(1) 2.804(2) 10.910(5) 1.891(4) 1.954(4) 2.180(4) 1.942(4) 2.273(5) 2.039(5) 1.947(4) 1.978(4)

Mn(2)–O(31) Mn(2)–O(410 ) Mn(2)–O(71) Mn(2)–O(710 ) Mn(3)–O(21) Mn(3)–O(31) Mn(3)–O(32) Mn(3)–O(62) Mn(3)–O(71) Mn(3)–O(72) Mn(4)–O(21) Mn(4)–O(51) Mn(4)–O(61) Mn(4)–O(72) Mn(4)–N(11) Mn(4)–N(12)

2.304(5) 2.173(5) 1.908(4) 1.870(3) 2.238(4) 2.158(4) 2.133(4) 2.131(5) 2.272(4) 2.164(4) 2.450(4) 2.130(4) 2.098(5) 2.163(4) 2.237(5) 2.238(6)

O(11)–Mn(1)–N(2) O(42)–Mn(1)–O(72) O(71)–Mn(1)–N(1) O(10 )–Mn(2)–O(71) O(22)–Mn(2)–O(710 ) O(31)–Mn(2)–O(410 ) O(21)–Mn(3)–O(32) O(31)–Mn(3)–O(72) O(62)–Mn(3)–O(71) O(21)–Mn(4)–O(51) O(61)–Mn(4)–N(12)

170.8(2) 177.7(2) 157.2(2) 167.5(2) 175.5(2) 169.5(1) 173.6(2) 150.6(2) 168.8(2) 161.2(2) 156.3(2)

O(72)–Mn(4)–N(11) Mn(1)–O(71)–Mn(2) Mn(1)–O(71)–Mn(20 ) Mn(1)–O(71)–Mn(3) Mn(2)–O(71)–Mn(20 ) Mn(2)–O(71)–Mn(3) Mn(20 )–O(71)–Mn(3) Mn(1)–O(72)–Mn(3) Mn(1)–O(72)–Mn(4) Mn(3)–O(72)–Mn(4)

153.2(2) 142.3(2) 107.8(2) 95.3(2) 95.8(2) 99.1(2) 118.0(2) 106.4(2) 118.5(2) 102.1(2)

a Primed atoms are related to the unprimed ones by the symmetry operation x, y, z + 1/2.

Fig. 4. The [Mn8(l4-O)2(l3-OH)2]14+ core of complex 3; O(71) and O(710 ) are the oxide ions, and O(72) and O(720 ) are the OH- ions. Colour scheme: MnII, yellow; MnIII, blue; O, red. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

Table 4 Bond valence sum (BVS) calculationsa,b for the Mn and selected O atoms in complex 3 Atom

MnII

MnIII

MnIV

Mn(1) Mn(2) Mn(3) Mn(4)

3.17 3.17 1.96 1.98

2.95 2.90 1.79 1.85

3.02 3.05 1.88 1.88

BVS

Assignment

O(71) O(72)

1.79 1.17

O2 OH

Fig. 5. The core of 3 emphasizing the oxime bridging modes. For the chemical nature of most atoms, see the caption of Fig. 4. O(21), O(31), O(210 ) and O(310 ) are the monoatomically bridging benzoate O atoms. N(2), O(1), N(12), and O(11) are the mpko oximate groups. Colour scheme as in Fig. 3.

this view is emphasized in Fig. 5. The Mn8 topology of 3 is shown in Fig. 6. Mn(1) and Mn(4) are bound to an O4N2 set of donor atoms, while Mn(2) and Mn(3) to an O6 set. Charge considerations require a 4MnII, 4MnIII mixed-valence description, and Mn(1) and Mn(2) are assigned as MnIII on the basis of (i) their shorter average MnO bond lengths (2.015 Å) compared with those for Mn(3) and Mn(4) (average 2.194 Å, with no individual value shorter than 2.10 Å); (ii) a Jahn–Teller (JT) axial elongation at Mn(1) and Mn(2) (the JT elongation axes are O(71)–Mn(1)–N(1) and O(31)– Mn(2)–O(410 )), as expected for high-spin d4 ions in near-octahedral geometry; and (iii) BVS calculations [26] (Table 4). Thus, the hydroxide group bridges one MnIII and two MnII atoms, while the oxide group bridges one MnII and three MnIII atoms. The l-O atom O(21) does not bridge the two MnII ions symmetrically, with Mn(3)–O(21) (2.238(4) Å) noticeably shorter than Mn(4)–O(21) (2.450(4) Å). The Mn(3,4)–O(72) bond distances (average (2.164(4) Å) are longer than the Mn(1)–O(72) distance (1.942(4) Å), consistent with a higher oxidation state for Mn1. It should also be noted that the O2 groups (O(71), O(710 )) bridge the three MnIII atoms in an asymmetric fashion. Thus, Mn(2,20 )– O(71) distances average 1.889(4) Å, whereas the Mn(1)–O(1) bond length is noticeably longer (2.180(4) Å). This is the result of O(71) lying on the JT elongation axis of Mn(1); MnIII–O2 distances at 2.2 Å are extremely rare [27]. The Mn  Mn distances (Table 3) depend on the number and nature of the bridges between two given metal centers and on the oxidation state of each Mn atom. The central Mn(2)  Mn(20 ) distance is the shortest (2.804(2) Å) and is (l4-O)2}2+ subunits in MnIII-containing clusters typical for {MnIII,III 2 [20,28]. The uncoordinated O atoms of the monodentate PhCO2  ligands (O(52) and O(520 )) are H-bonded to the OH ligands, with the O(52)  O(72) distance being 2.777(2) Å. The core of 3 can be described in various ways: (i) as two 7þ subunits (atoms Mn(1)–Mn(4) and fMnII2 MnIII 2 ðl3 -OÞðl3 -OHÞg their symmetry equivalents) becoming linked through their l3-O

a The italic value is the one closest to the charge for which it was calculated. The oxidation state of a particular Mn center can be taken as the nearest whole number to the italic value. b An O BVS in the 1.8–2.0, 1.0–1.2 and 0.2–0.4 ranges is indicative of zero, single, and double protonation, respectively.

and four g1:g1:g1:l mpko ligands. Each mpko ligand chelates one metal ion through its nitrogen atoms forming a five-membered ring and bridges this metal ion with a second one through the terminally ligated, deprotonated oximate O atom (O(1), O(10 ), O(11), O(110 )). If we consider the monoatomic carboxylate bridges and the bridging diatomic oximate groups as part of the core, then the latter becomes [Mn8(l4-O)2(l3-OH)2(l-OR00 )4(l-ONR000 )4]6+;

Fig. 6. The Mn8 skeleton of 3 emphasizing the ‘edge-sharing tetrahedra’, ‘butterflylike’ and various triangular subunits. Colour scheme: MnII, yellow; MnIII, blue. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)

3708

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709

2

3.3. Magnetochemistry Variable-temperature dc magnetic susceptibility data in a 0.1 T field and in the 5.0–300 K range were collected on a powdered microcrystalline sample of 3 restrained in eicosane to prevent torquing. The obtained data are plotted as vMT versus T in Fig. 7. The vMT value at 300 K is 29.34 cm3 K mol1. This value is slightly less than that expected for a cluster comprising four MnII and four MnIII non-interacting ions (29.50 cm3 K mol1 with g = 2). The vMT product gradually decreases with decreasing temperature to 15.12 cm3 K mol1 at 50 K before dropping to 2.99 cm3 K mol1 at

35

χMT (cm3 mol-1 K)

30 25 20 15 10 5 0 0

50

100

150

200

Temperature (K) Fig. 7. Plot of vMT vs. T for cluster 3.

250

300

4 2 χM' T (cm3 mol-1 K)

converting to l4 and thus providing the two ‘inter-fragment’ Mn(2)–O(710 ) and Mn(20 )–O(71) bonds. The four metal ions in each subunit are nearly coplanar with the Mn(1)–Mn(2)–Mn(3)–Mn(4) 7þ subunit torsion angle being 7.18°. The fMnII2 MnIII 2 ðl3 -OÞðl3 -OHÞg has not been seen before in a discrete Mn4 cluster or as a recognizable sub-fragment of a higher nuclearity cluster; (ii) as a central 12þ subunit (the oxidized version of the familiar fMnII2 MnIII 4 ðl4 -OÞg 10+ ( l -O) ] core [29]) with an additional MnII atom at [MnII4MnIII 4 2 2 each end linked through the l3-OH ion. The central 12þ subunit consists of six Mn ions arranged as fMnII2 MnIII 4 ðl4 -OÞ2 g two edge-sharing tetrahedra, each with a central l4-O2-. The Mn–l4-O2–Mn angles range from 95.3° to 142.3°, deviating significantly from the 109.5° ideal values of a tetrahedron. The central 12þ subunit can also be considered as two fMnII2 MnIII 4 ðl4 -OÞ2 g 6+ {Mn3O} triangular units (Mn(1,2,3) and Mn(10 ,20 ,30 ) or, alternatively, Mn(1,20 ,3) and Mn(10 ,2,30 )) joined together by each of their l3-O2 ions (O71 and O710 ) becoming l4 by ligating to the MnIII center of the adjacent unit. Note that this central {Mn6O2}12+ subunit of 3 is similar to the recently reported Mn6 cation 2+ (dapdoH2 = 2,6-diacetyl[MnII2MnIII 4 O2(OMe)2(dapdo)2(dapdoH)4] 8þ butpyridine dioxime) [5b]; and (iii) as a central fMnIII 4 ðl3 -OÞ2 g 0 terfly-like [15a,30] subunit (atoms Mn(1), Mn(2), Mn(2 ), Mn(10 ), 3+ subunits O(71), O(710 )) to which are attached two {MnII,II 2 (l-OH)} via the interfragment bonds Mn(1)–O(72), Mn(3)–O(71) and their symmetry equivalents; as a result, each OH- group becomes l3, forming a bond with a ‘wing-tip’ MnIII atom (Mn(1), Mn(10 )), and each O2 group is converted to l4 forming a bond with one of the MnII atoms (Mn(3), Mn(30 )). Complex 3 joins only a small family of Mn clusters of nuclearity eight, which currently comprise the metal oxidation levels MnII8 II III II III III [31], MnII6MnIII 2 [32], Mn4 Mn4 [7,33], Mn2 Mn6 [5b,15a,34], Mn8 IV [35] and MnIII 2 Mn6 [36], and thus it becomes the fourth member of the MnII4MnIII 4 subfamily.

0 -2 -4 -6 250 Hz 50 Hz 10 Hz 5 Hz

-8 -10 0

2

4

6

8

10

Temperature (K) Fig. 8. Plot of the in-phase ac susceptibility signals as a v0 MT vs. T plot for complex 3 in a 3.5 G field oscillating at the indicated frequencies.

5.0 K. The vMT versus T data appear to be heading for 0 cm3 K mol1 at 0 K. This behaviour is indicative of dominant antiferromagentic interactions between the metal centers with the low temperature value suggesting a small ground state spin of S = 0 or 1. To determine which one it is, and to avoid complications from an applied dc field, we employed the ac susceptibility technique [37] with a zero dc field and a 3.5 G ac field (Fig. 8). The v0 MT signal below 10 K is zero, confirming an S = 0 ground state [29], and the essentially constant value in this temperature range indicates little population of excited states. Similarly low or S = 0 ground states have been reported for the other MnII4MnIII 4 clusters in the literature [33], and we have provided elsewhere a detailed rationalization of the S = 0 ground state for the structurally similar cluster 1 [7] on the basis of the wellestablished magnetic behaviour of the central, butterfly-like 8+ subcore [30,38]. {MnIII 4 (l3-O)2} 4. Conclusions The present work extends the body of results that emphasize the ability of mpkoH to form interesting structural types in Mn car+ 0 boxylate chemistry. In addition to the [MnIII 3 O(O2CR )3(mpko)3]  cationic SMMs reported previously [9–11], the Mn=PhCO2 =mpkoH reaction system has provided access to the octanuclear MnII4MnIII 4 cluster 3 and the mononuclear MnII compound 2. Complex 3 is a new addition to the Mn8 family of clusters. Although this compound has been found to possess a S = 0 spin ground state, the potentially l3 mode of mpko (which has not been realized in the present  study) [13] would undoubtedly give Mnx =RCO2  =mpko products structurally different from 3 and which may have high-spin ground states. The bridging mode(s) of mpko also suggests possibilities for other Mnx non-carboxylate clusters to exist, e.g. clusters containing the strongly coordinating inorganic anions N3  , NCO- and SO4 2 . As far as the specific goals of this work mentioned in the Introduction are concerned, it has been demonstrated that the attainment and stability of clusters containing the [MnII4MnIII 4 (l4-O)2 (l3-OH)2]14+ core are not limited to the use of ppko (Fig. 1), nor are they in some way a consequence of any specific property of this ligand, other than its chelating/bridging nature. The employment of mpko- leads to a product with the same formulation, superimposable cores and almost identical magnetic behaviour. In many ways, this was surprising given how often similarly small changes to a reaction, such as changing the carboxylate or solvent, can lead to a completely different product. There are examples in nickel chemistry

C.C. Stoumpos et al. / Polyhedron 27 (2008) 3703–3709

where mpkoH and ppkoH give different products in otherwise similar reactions [24,39]. The presence or absence of counteranions such as ClO4  does make a difference, however; its absence from the present reactions precludes formation of the trinuclear  [Mn3O]7+-containing, mixed R0 CO2  =mpko complexes, another thermodynamically favorable arrangement and potential product  of Mn=R0 CO2  =mpko components. Acknowledgements This work was supported by EPEAEK II (Program PYTHAGORAS I, Grant b.365.037 to S.P.P) and NSF (CHE-0414555 to G.C.). Appendix A. Supplementary data CCDC 693825 and 693826 contain supplementary crystallographic data for 2 and 3  1.8CH2Cl2  1.8Et2O. These data can be obtained free of charge via http://www.ccdc.cam.ac.uk/conts/ retrieving.html, or from the Cambridge Crystallographic Data Centre, 12 Union Road, Cambridge CB2 1EZ, UK; fax: (+44) 1223-336033; or e-mail: [email protected]. Supplementary data associated with this article can be found, in the online version, at doi:10.1016/j.poly.2008.09.010. References [1] (a) K.N. Ferreira, T.M. Iverson, K. Maghlaoui, J. Barber, S. Iwata, Science 303 (2004) 1831; (b) A recent comprehensive review:J. Barber, J.W. Murray, Coord. Chem. Rev. 252 (2008) 416. [2] (a) A recent review: C.S. Mullins, V.L. Pecoraro, Coord. Chem. Rev. 252 (2008) 416; (b) A. Mishra, W. Wernsdorfer, K.A. Abboud, G. Christou, Chem. Commun. (2005) 54; (c) I.J. Hewitt, J.K. Tang, N.T. Maddhu, R. Clérac, G. Buth, C.F. Anson, A.K. Powell, Chem. Commun. (2006) 2650. [3] (a) For reviews see: G. Christou, D. Gatteschi, D.N. Hendrickson, R. Sessoli, MR Bull. 25 (2000) 66; (b) D. Gatteschi, R. Sessoli, Angew. Chem., Int. Ed. 42 (2003) 268; (c) R. Birchner, G. Chaboussant, C. Dobe, H. Güdel, S.T. Ochsenbein, A. Sieber, O. Waldman, Adv. Funct. Mater. 16 (2006) 209; (d) G. Aromi, E.K. Brechin, Struct. Bond. 122 (2006) 1. [4] (a) Th.C. Stamatatos, G. Christou, Philos. Trans. Roy. Soc. (A) 366 (2008) 113; (b) C.J. Milios, A. Vinslava, W. Wernsdorfer, S. Moggach, S. Parsons, S.P. Perlepes, G. Christou, E.K. Brechin, J. Am. Chem. Soc. 129 (2007) 2754. [5] (a) G. Christou, Polyhedron 24 (2005) 2065; (b) Th.C. Stamatatos, B.S. Luisi, B. Moulton, G. Christou, Inorg. Chem. 47 (2008) 1134. and references cited therein. [6] C.J. Milios, E. Keffalloniti, C.P. Raptopoulou, A. Terzis, A. Escuer, R. Vicente, S.P. Perlepes, Polyhedron 23 (2004) 83. [7] C.J. Milios, Th.C. Stamatatos, P. Kyritsis, A. Terzis, C.P. Raptopoulou, R. Vicente, A. Escuer, S.P. Perlepes, Eur. J. Inorg. Chem. (2004) 2885. [8] C.J. Milios, P. Kyritsis, C.P. Raptopoulou, A. Terzis, R. Vicente, A. Escuer, S.P. Perlepes, Dalton Trans. (2005) 501. [9] Th.C. Stamatatos, D. Foguet-Albiol, C.C. Stoumpos, C.P. Raptopoulou, A. Terzis, W. Wernsdorfer, S.P. Perlepes, G. Christou, Polyhedron 26 (2007) 2165. [10] S.-C. Lee, Th.C. Stamatatos, D. Foguet-Albiol, S. Hill, S.P. Perlepes, G. Christou, Polyhedron 26 (2007) 2255. [11] Th.C. Stamatatos, D. Foguet-Albiol, S.-C. Lee, C.C. Stoumpos, C.P. Raptopoulou, A. Terzis, W. Wernsdorfer, S.O. Hill, S.P. Perlepes, G. Christou, J. Am. Chem. Soc. 129 (2007) 9484. [12] (a) For reviews see: V.Yu. Kukushkin, A.J.L. Pombeiro, Coord. Chem. Rev. 181 (1999) 147; (b) A.G. Smith, P.A. Tasker, D.J. White, Coord. Chem. Rev. 241 (2003) 61; (c) P. Chaudhuri, Coord. Chem. Rev. 243 (2003) 143. [13] C.J. Milios, Th.C. Stamatatos, S.P. Perlepes, Polyhedron 25 (2006) 134 (Polyhedron Report). [14] H. Miyasaka, R. Clérac, K. Mizushima, K. Sugiura, M. Yamashita, W. Wernsdorfer, C. Coulon, Inorg. Chem. 42 (2003) 8203. [15] (a) M.W. Wemple, H.-L. Tsai, S. Wang, J.P. Claude, W.E. Streib, J.C. Huffman, D.N. Hendrickson, G. Christou, Inorg. Chem. 35 (1996) 6437; (b) J.B. Vincent, K. Folting, J.C. Huffman, G. Christou, Inorg. Chem. 25 (1986) 996.

3709

[16] J.B. Vincent, H.-R. Chang, K. Folting, J.C. Huffman, G. Christou, D.N. Hendrickson, J. Am. Chem. Soc. 109 (1987) 5703. [17] (a) G.M. Sheldrick, SHELXS-97, Program for Crystal Structure Solution, University of Göttingén, Germany, 1997; (b) G.M. Sheldrick, SHELXS-97, Program for the Refinement of Crystal Structures from Diffraction Data, University of Göttingén, Germany, 1997; (c) Rigaku/MSC, CRYSTALCLEAR, The Woodlands, Texas, USA, 2008. [18] (a) H.-L. Tsai, S. Wang, K. Folting, W.E. Streib, D.N. Hendrickson, G. Christou, J. Am. Chem. Soc. 117 (1995) 2503; (b) R.C. Squire, S.M.J. Aubin, K. Folting, W.E. Streib, G. Christou, D.N. Hendrickson, Inorg. Chem. 34 (1995) 6463. [19] N.C. Harden, M.A. Bolcar, W. Wernsdorfer, K.A. Abboud, W.E. Streib, G. Christou, Inorg. Chem. 42 (2003) 7067. [20] M.A. Halcrow, W.E. Streib, K. Folting, G. Christou, Acta crystallogr. C 51 (1995) 1263. [21] K.W. Nordquest, D.W. Phelps, W.F. Little, D.J. Hodgson, J. Am. Chem. Soc. 98 (1976) 1104. [22] I. Chadjistamatis, A. Terzis, C.P. Raptopoulou, S.P. Perlepes, Inorg. Chem. Commun. 6 (2003) 1365. [23] R.D. Cannon, R.P. White, Prog. Inorg. Chem. 36 (1988) 195. [24] C. Papatriantafyllopoulou, C.G. Efthymiou, C.P. Raptopoulou, A. Terzis, E. Manessi-Zoupa, S.P. Perlepes, Spectrochim. Acta, Part A 70 (2008) 718. [25] G.B. Deacon, R.J. Phillips, Coord. Chem. Rev. 33 (1980) 227. [26] (a) I.D. Brown, D. Altermatt, Acta Crystallogr., Sect. B 41 (1985) 244; (b) W. Liu, H.H. Thorp, Inorg. Chem. 32 (1993) 4102. [27] H.J. Eppley, S.M.J. Aubin, W.E. Streib, J.C. Bollinger, D.N. Hendrickson, G. Christou, Inorg. Chem. 36 (1997) 109. [28] A.G. Blackman, J.C. Huffman, E.B. Lobkovsky, G. Christou, Polyhedron 11 (1992) 251. [29] Th.C. Stamatatos, D. Foguet-Albiol, S.P. Perlepes, C.P. Raptopoulou, A. Terzis, C.S. Patrickios, G. Christou, A.J. Tasiopoulos, Polyhedron 25 (2006) 1737. and references cited therein. [30] J.B. Vincent, C. Christmas, H.-R. Chang, Q. Li, P.D.W. Boyd, J.C. Huffman, D.N. Hendrickson, G. Christou, J. Am. Chem. Soc. 111 (1989) 2086. [31] (a) For example see: R.W. Saalfrank, N. Löw, B. Demleitner, D. Stalke, M. Teichert, Chem. Eur. J. 4 (1998) 1305; (b) R.W. Saalfrank, N. Löw, S. Trummer, G.M. Sheldrick, M. Teichert, D. Stalke, Eur. J. Inorg. Chem. (1998) 559. [32] (a) Th.C. Stamatatos, K.A. Abboud, G. Christou, J. Mol. Struct., in press. Available from:; (b) C. Boskovic, W. Wernsdorfer, K. Folting, J.C. Huffman, D.N. Hendrickson, G. Christou, Inorg. Chem. 41 (2002) 5107; (c) C. Boskovic, J.C. Huffman, G. Christou, Chem. Commun. (2002) 2502. [33] (a) C.J. Milios, F.P.A. Fabbiani, S. Parsons, M. Murugesu, G. Christou, E.K. Brechin, Dalton Trans. (2006) 351; (b) M. Murugesu, W. Wernsdorfer, K.A. Abboud, G. Christou, Angew. Chem., Int. Ed. 44 (2005) 892; (c) M. Manoli, C.J. Milios, A. Mishra, G. Christou, E.K. Brechin, Polyhedron 26 (2007) 1923. [34] (a) R. Bagai, K.A. Abboud, G. Christou, Inorg. Chem. 47 (2008) 621; (b) E.K. Brechin, G. Christou, M. Soler, M. Helliwell, S.J. Teat, Dalton Trans. (2003) 513; (c) C.J. Milios, R. Inglis, A. Vinslava, A. Prescimone, S. Parsons, S.P. Perlepes, G. Christou, E.K. Brechin, Chem. Commun. (2007) 2738. [35] (a) For example see: S. Tanase, G. Aromi, E. Bouwman, H. Kooijman, A.L. Spek, J. Reedijk, Chem. Commun. (2003) 3147; (b) E.K. Brechin, M. Soler, G. Christou, M. Helliwell, S.J. Teat, W. Wernsdorfer, Chem. Commun. (2003) 1276; (c) V.A. Grillo, M.J. Knapp, J.C. Bollinger, D.N. Hendrickson, G. Christou, Angew. Chem., Int. Ed. 35 (1996) 1818; (d) H.-L. Tsai, W. Wang, K. Folting, W.E. Streib, D.N. Hendrickson, G. Christou, J. Am. Chem. Soc. 117 (1995) 2503; (e) S. Wang, H.-L. Tsai, K. Folting, J.D. Martin, D.N. Hendrickson, G. Christou, J. Chem. Soc., Chem. Commun. (1997) 671; (f) E. Libby, K. Folting, C.J. Huffman, G. Christou, Inorg. Chem. 32 (1993) 2549; (g) L.F. Jones, E.K. Brechin, D. Collison, J. Raftery, S.J. Teat, Inorg. Chem. 42 (2003) 6971. [36] A.J. Tasiopoulos, K.A. Abboud, G. Christou, Chem. Commun. (2003) 580. [37] E.C. Sañudo, V.A. Grillo, M.J. Knapp, J.C. Bollinger, J.C. Huffman, D.N. Hendrickson, G. Christou, Inorg. Chem. 41 (2002) 2441. and references cited therein. [38] (a) E. Libby, J.K. McCusker, E.A. Schmitt, K. Folting, D.N. Hendrickson, G. Christou, Inorg. Chem. 30 (1991) 3486; (b) S. Wang, K. Folting, W.E. Streib, E.A. Schmitt, J.K. McCusker, D.N. Hendrickson, G. Christou, Angew. Chem., Int. Ed. 30 (1991) 305; (c) G. Aromi, S. Bhaduri, P. Artus, J.C. Huffman, D.N. Hendrickson, G. Christou, Polyhedron 21 (2002) 1799; (d) C. Cañada-Vilalta, J.C. Huffman, G. Christou, Polyhedron 20 (2001) 1785. [39] C. Papatriantafyllopoulou, C.P. Raptopoulou, A. Terzis, J.F. Janssens, S.P. Perlepes, E. Manessi-Zoupa, Z. Naturforsch. 62b (2007) 1123.