- Email: [email protected]
Author Index Volume 33
Mechanics of Materials 33 (2001) 759±761
www.elsevier.com/locate/mechmat
Author Index Volume 33 (The issue number is given in front of the page number) Albert, R.A. and J.W. Rudnicki, Finite element simulations of Tennessee marble under plane strain laboratory testing: Eects of sample± platen friction on shear band onset Allen, D.H., Preface Allen, D.H. and C.R. Searcy, A micromechanically-based model for predicting dynamic damage evolution in ductile polymers Arrieta, H.V. and H.D. Espinosa, The role of thermal activation on dynamic stress-induced inelasticity and damage in Ti±6Al±4V Baaijens, F.P.T., see van der Aa, M.A.H. Benveniste, Y. and T. Miloh, Imperfect soft and sti interfaces in two-dimensional elasticity Bergstr om, J.S. and M.C. Boyce, Constitutive modeling of the time-dependent and cyclic loading of elastomers and application to soft biological tissues Berryman, J.G., see Garboczi, E.J. Biwa, S., Independent scattering and wave attenuation in viscoelastic composites Biwa, S., N. Ito and N. Ohno, Elastic properties of rubber particles in toughened PMMA: ultrasonic and micromechanical evaluation Boyce, B.L., X. Chen, J.W. Hutchinson and R.O. Ritchie, The residual stress state due to a spherical hard-body impact Boyce, M.C., see Socrate, S. Boyce, M.C., see Bergstr om, J.S. Brara, A., F. Camborde, J.R. Klepaczko and C. Mariotti, Experimental and numerical study of concrete at high strain rates in tension Bravo-Castillero, J., see RodrõÂguez-Ramos, R. Bravo-Castillero, J., R. Guinovart-DõÂaz, F.J. Sabina and R. RodrõÂguez-Ramos, Closed-form expressions for the eective coecients of a ®ber-reinforced composite with transversely isotropic constituents ± II. Piezoelectric and square symmetry Byrne, J., see Zhao, L.G. Camborde, F., see Brara, A. Caracciolo, R., A. Gasparetto and M. Giovagnoni, Application of causality check and of the reduced variables method for experimental
(1) 47 (3) 125 (3) 177 (10) 573 (10) 555 (6) 309
(9) 523 (8) 455 (11) 635 (12) 717 (8) 441 (3) 155 (9) 523 (1) 33 (4) 223
(4) 237 (10) 593 (1) 33
determination of Young's modulus of a viscoelastic material Chen, S.H. and Y.C. Gao, Asymptotic analysis based on K±S constitutive law for a rubber wedge compressed by a line load at its tip Chen, X., see Boyce, B.L. Chen, Z.T., see Meguid, S.A. Cheng, J., S. Nemat-Nasser and W. Guo, A uni®ed constitutive model for strain-rate and temperature dependent behavior of molybdenum Cheung, Y.K., see Jiang, C.P. Earmme, Y.Y., see Kim, J.H. Earmme, Y.Y., see Lee, K.W. Ehrlacher, A., see Hadj-Ahmed, R. Espinosa, H.D., see Arrieta, H.V. Fan, H. and K.Y. Sze, A micro-mechanics model for imperfect interface in dielectric materials Foret, G., see Hadj-Ahmed, R. Gao, C.-F. and M.-Z. Wang, Collinear permeable cracks in thermopiezoelectric materials Gao, Y.C., see Chen, S.H. Garboczi, E.J. and J.G. Berryman, Elastic moduli of a material containing composite inclusions: eective medium theory and ®nite element computations Gasparetto, A., see Caracciolo, R. Giovagnon, M., see Caracciolo, R. Gross, D., see Mueller, R. Gu, Y.-B., see Nemat-Nasser, S. Guduru, P.R., A.J. Rosakis and G. Ravichandran, Dynamic shear bands: an investigation using high speed optical and infrared diagnostics Guinovart-DõÂaz, R., see RodrõÂguez-Ramos, R. Guinovart-DõÂaz, R., see Bravo-Castillero, J. Guo, W., see Cheng, J. Guo, W.-G., see Nemat-Nasser, S. Gupta, V., see Somlo, B. Hadj-Ahmed, R., G. Foret and A. Ehrlacher, Probabilistic analysis of failure in adhesive bonded joints
0167-6636/01/$ - see front matter Ó 2001 Elsevier Science Ltd. All rights reserved. PII: S 0 1 6 7 - 6 6 3 6 ( 0 1 ) 0 0 0 9 6 - 5
(12) 693 (9) 481 (8) 441 (2) 85
(11) 603 (5) 295 (1) (2) (2) (10)
21 97 77 573
(6) 363 (2) 77 (1) 1 (9) 481
(7) (12) (12) (2) (8)
455 693 693 63 425
(7) (4) (4) (11) (8) (8)
371 223 237 603 425 471
(2) 77
760
Author Index Volume 33
Hamrick II, J.L., see Mall, S. Han, S., S. Li and D.J. Smith, Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys. I. Analytical identi®cation Han, S., S. Li and D.J. Smith, Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys II. Numerical simulations Hayashi, S., see Tobushi, H. Hirose, Y., see Kawagishi, Y. Hsueh, C.-H., see Wang, S.-D. Huang, Z.-M., Micromechanical life prediction for composite laminates Hutchinson, J.W., see Boyce, B.L.
(11) 679
Indrakanti, S.S., see Nemat-Nasser, S. Ito, N., see Biwa, S. Ito, N., see Tobushi, H. Jiang, C.P., Z.H. Tong and Y.K. Cheung, A generalized self-consistent method for piezoelectric ®ber reinforced composites under antiplane shear Kawagishi, Y., M. Shozu and Y. Hirose, Experimental evaluation of stress ®eld around crack tip by caustic method Kim, J.H., H.J. Moon and Y.Y. Earmme, Inplane and antiplane T-stresses for an interface crack in anisotropic bimaterial Klepaczko, J.R., see Brara, A. Kumar, R.S. and R. Talreja, Linear viscoelastic behavior of matrix cracked cross-ply laminates Kwon, S.M. and K.Y. Lee, Constant moving crack in a piezoelectric block: anti-plane problem Lavrov, A., Kaiser eect observation in brittle rock cyclically loaded with dierent loading rates Lazzeri, A., see Socrate, S. Lee, K.W., J.H. Lim and Y.Y. Earmme, A screw dislocation interacting with an interfacial crack in two anisotropic thin ®lms with ®nite thickness Lee, K.Y., see Kwon, S.M. Lee, S., see Wang, S.-D. Leon, R. and Y.J. Weitsman, Time-to-failure of randomly reinforced glass strand/urethane matrix composites: data, statistical analysis and theoretical prediction Li, C. and G.J. Weng, Dynamic stress intensity factor of a cyclindrical interface crack with a functionally graded interlayer Li, S., see Han, S.
(5) 251
(5) (10) (12) (3)
267 545 741 105
(4) 185 (8) 441 (8) 425 (12) 717 (10) 545
(5) 295
(12) 741 (1) 21 (1) 33 (3) 139 (11) 649
(11) 669 (3) 155
(2) 97 (11) 649 (2) 105
(3) 127 (6) 325 (5) 251
Li, S., see Han, S. Lim, J.H., see Lee, K.W. Madgwick, A., T. Mori, P.J. Withers and K. Wakashima, Steady-state creep of a composite Mall, S., J.L. Hamrick II and T. Nicholas, High cycle fatigue behavior of Ti±6Al±4V with simulated foreign object damage Maranini, E. and T. Yamaguchi, A non-associated viscoplastic model for the behaviour of granite in triaxial compression Mariotti, C., see Brara, A. Meguid, S.A. and Z.T. Chen, Transient response of a ®nite piezoelectric strip containing coplanar insulating cracks under electromechanical impact Meijer, H.E.H., see van der Sluis, O. Mendels, D.A., see Nairn, J.A. Miloh, T., see Benveniste, Y. Moon, H.J., see Kim, J.H. Mori, T., see Madgwick, A. Mu, Y., see Sumi, Y. Mueller, R. and D. Gross, A time-dependent constitutive law for materials with microstructural evolution Nairn, J.A. and D.A. Mendels, On the use of planar shear-lag methods for stress-transfer analysis of multilayered composites Nemat-Nasser, S., W.-G. Guo, V.F. Nesterenko, S.S. Indrakanti and Y.-B. Gu, Dynamic response of conventional and hot isostatically pressed Ti±6Al±4V alloys: experiments and modeling Nemat-Nasser, S., Editor's note Nemat-Nasser, S., see Cheng, J. Nesterenko, V.F., see Nemat-Nasser, S. Nicholas, T., see Mall, S. Ohno, N., see Biwa, S. Okumura, K., see Tobushi, H. Olsson, W.A., Quasistatic propagation of compaction fronts in porous rock Ouadfel, H. and L. Rothenburg, `Stress±force± fabric' relationship for assemblies of ellipsoids Paoni, B., see Robbe-Valloire, F. Progri, R., see Robbe-Valloire, F. Pyrz, R., see Schjùdt-Thomsen, J. Ravichandran, G., see Guduru, P.R. Reiterer, A. and S.E Stanzl-Tschegg, Compressive behaviour of softwood under uniaxial loading at dierent orientations to the grain Ritchie, R.O., see Boyce, B.L. Robbe-Valloire, F., B. Paoni and R. Progri, Load transmission by elastic, elasto-plastic
(5) 267 (2) 97
(9) 493 (11) 679 (5) 283 (1) 33
(2) (9) (6) (6) (1) (9) (2) (2)
85 499 335 309 21 493 121 63
(6) 335
(8) (3) (11) (8) (11)
425 123 603 425 679
(12) 717 (10) 545 (11) 659 (4) 201 (11) 617 (11) 617 (10) 531 (7) 371 (12) 705 (8) 441
Author Index Volume 33 or fully plastic deformation of rough interface asperities RodrõÂguez-Ramos, R., see Bravo-Castillero, J. RodrõÂguez-Ramos, R., F.J. Sabina, R. GuinovartDõÂaz and J. Bravo-Castillero, Closed-form expressions for the eective coecients of a ®ber-reinforced composite with transversely isotropic constituents ± I. Elastic and square symmetry Rosakis, A.J., see Guduru, P.R. Rothenburg, L., see Ouadfel, H. Rousseau, C.-E. and H.V. Tippur, Dynamic fracture of compositionally graded materials with cracks along the elastic gradient: experiments and analysis Rudnicki, J.W., see Albert, R.A. Sabina, F.J., see Bravo-Castillero, J. Sabina, F.J., see RodrõÂguez-Ramos, R. Schjùdt-Thomsen, J. and R. Pyrz, The Mori±Tanaka stiness tensor: diagonal symmetry, complex ®bre orientations and non-dilute volume fractions Schreurs, P.J.G., see van der Aa, M.A.H. Schreurs, P.J.G., see van der Sluis, O. Searcy, C.R., see Allen, D.H. Shozu, M., see Kawagishi, Y. Smith, D.J., see Han, S. Smith, D.J., see Han, S. Socrate, S., M.C. Boyce and A. Lazzeri, A micromechanical model for multiple crazing in high impact polystyrene Somlo, B. and V. Gupta, A hydrophobic self-assembled monolayer with improved adhesion to aluminum for deicing application Stanzl-Tschegg, S.E, see Reiterer, A. Sumi, Y. and Y. Mu, Erratum to ``Thermally induced quasi-static wavy crack propagation in a brittle solid'' [Mech. Mater. 32 (2000) 531± 542] Sze, K.Y., see Fan, H.
(11) 617 (4) 237
(4) 223 (7) 371 (4) 201
(7) 403 (1) 47 (4) 237 (4) 223
(10) (10) (9) (3) (12) (5) (5)
531 555 499 177 741 251 267
(3) 155 (8) 471 (12) 705
(2) 121 (6) 363
Talreja, R., see Kumar, R.S. Tippur, H.V., see Rousseau, C.-E. Tobushi, H., K. Okumura, S. Hayashi and N. Ito, Thermomechanical constitutive model of shape memory polymer Tong, J., see Zhao, L.G. Tong, Z.H., see Jiang, C.P. Van de Steen, B. and A. Vervoort, Non-local stress approach to fracture initiation in laboratory experiments with a tensile stress gradient Van der Aa, M.A.H., P.J.G. Schreurs and F.P.T. Baaijens, Modelling of the wall ironing process of polymer coated sheet metal Van der Sluis, O., P.J.G. Schreurs and H.E.H. Meijer, Homogenisation of structured elastoviscoplastic solids at ®nite strains Vermeulen, B., see Zhao, L.G. Vervoort, A., see Van de Steen, B. Wakashima, K., see Madgwick, A. Wang, M.-Z., see Gao, C.-F. Wang, S.-D., S. Lee and C.-H. Hsueh, Eect of substrate modulus dierence on dislocation formation in an epitaxial ®lm Wang, X. and S. Yu, Transient response of a crack in piezoelectric strip subjected to the mechanical and electrical impacts: mode-I problem Weitsman, Y.J., see Leon, R. Weng, G.J., see Li, C. Withers, P.J., see Madgwick, A. Yamaguchi, T., see Maranini, E. Yu, S., see Wang, X. Zhao, L.G., J. Tong, B. Vermeulen and J. Byrne, On the uniaxial mechanical behaviour of an advanced nickel base superalloy at high temperature
761 (3) 139 (7) 403 (10) 545 (10) 593 (5) 295
(12) 729 (10) 555 (9) 499 (10) 593 (12) 729 (9) 493 (1) 1 (2) 105
(1) (3) (6) (9)
11 127 325 493
(5) 283 (1) 11
(10) 593
www.elsevier.com/locate/mechmat
Author Index Volume 33 (The issue number is given in front of the page number) Albert, R.A. and J.W. Rudnicki, Finite element simulations of Tennessee marble under plane strain laboratory testing: Eects of sample± platen friction on shear band onset Allen, D.H., Preface Allen, D.H. and C.R. Searcy, A micromechanically-based model for predicting dynamic damage evolution in ductile polymers Arrieta, H.V. and H.D. Espinosa, The role of thermal activation on dynamic stress-induced inelasticity and damage in Ti±6Al±4V Baaijens, F.P.T., see van der Aa, M.A.H. Benveniste, Y. and T. Miloh, Imperfect soft and sti interfaces in two-dimensional elasticity Bergstr om, J.S. and M.C. Boyce, Constitutive modeling of the time-dependent and cyclic loading of elastomers and application to soft biological tissues Berryman, J.G., see Garboczi, E.J. Biwa, S., Independent scattering and wave attenuation in viscoelastic composites Biwa, S., N. Ito and N. Ohno, Elastic properties of rubber particles in toughened PMMA: ultrasonic and micromechanical evaluation Boyce, B.L., X. Chen, J.W. Hutchinson and R.O. Ritchie, The residual stress state due to a spherical hard-body impact Boyce, M.C., see Socrate, S. Boyce, M.C., see Bergstr om, J.S. Brara, A., F. Camborde, J.R. Klepaczko and C. Mariotti, Experimental and numerical study of concrete at high strain rates in tension Bravo-Castillero, J., see RodrõÂguez-Ramos, R. Bravo-Castillero, J., R. Guinovart-DõÂaz, F.J. Sabina and R. RodrõÂguez-Ramos, Closed-form expressions for the eective coecients of a ®ber-reinforced composite with transversely isotropic constituents ± II. Piezoelectric and square symmetry Byrne, J., see Zhao, L.G. Camborde, F., see Brara, A. Caracciolo, R., A. Gasparetto and M. Giovagnoni, Application of causality check and of the reduced variables method for experimental
(1) 47 (3) 125 (3) 177 (10) 573 (10) 555 (6) 309
(9) 523 (8) 455 (11) 635 (12) 717 (8) 441 (3) 155 (9) 523 (1) 33 (4) 223
(4) 237 (10) 593 (1) 33
determination of Young's modulus of a viscoelastic material Chen, S.H. and Y.C. Gao, Asymptotic analysis based on K±S constitutive law for a rubber wedge compressed by a line load at its tip Chen, X., see Boyce, B.L. Chen, Z.T., see Meguid, S.A. Cheng, J., S. Nemat-Nasser and W. Guo, A uni®ed constitutive model for strain-rate and temperature dependent behavior of molybdenum Cheung, Y.K., see Jiang, C.P. Earmme, Y.Y., see Kim, J.H. Earmme, Y.Y., see Lee, K.W. Ehrlacher, A., see Hadj-Ahmed, R. Espinosa, H.D., see Arrieta, H.V. Fan, H. and K.Y. Sze, A micro-mechanics model for imperfect interface in dielectric materials Foret, G., see Hadj-Ahmed, R. Gao, C.-F. and M.-Z. Wang, Collinear permeable cracks in thermopiezoelectric materials Gao, Y.C., see Chen, S.H. Garboczi, E.J. and J.G. Berryman, Elastic moduli of a material containing composite inclusions: eective medium theory and ®nite element computations Gasparetto, A., see Caracciolo, R. Giovagnon, M., see Caracciolo, R. Gross, D., see Mueller, R. Gu, Y.-B., see Nemat-Nasser, S. Guduru, P.R., A.J. Rosakis and G. Ravichandran, Dynamic shear bands: an investigation using high speed optical and infrared diagnostics Guinovart-DõÂaz, R., see RodrõÂguez-Ramos, R. Guinovart-DõÂaz, R., see Bravo-Castillero, J. Guo, W., see Cheng, J. Guo, W.-G., see Nemat-Nasser, S. Gupta, V., see Somlo, B. Hadj-Ahmed, R., G. Foret and A. Ehrlacher, Probabilistic analysis of failure in adhesive bonded joints
0167-6636/01/$ - see front matter Ó 2001 Elsevier Science Ltd. All rights reserved. PII: S 0 1 6 7 - 6 6 3 6 ( 0 1 ) 0 0 0 9 6 - 5
(12) 693 (9) 481 (8) 441 (2) 85
(11) 603 (5) 295 (1) (2) (2) (10)
21 97 77 573
(6) 363 (2) 77 (1) 1 (9) 481
(7) (12) (12) (2) (8)
455 693 693 63 425
(7) (4) (4) (11) (8) (8)
371 223 237 603 425 471
(2) 77
760
Author Index Volume 33
Hamrick II, J.L., see Mall, S. Han, S., S. Li and D.J. Smith, Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys. I. Analytical identi®cation Han, S., S. Li and D.J. Smith, Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys II. Numerical simulations Hayashi, S., see Tobushi, H. Hirose, Y., see Kawagishi, Y. Hsueh, C.-H., see Wang, S.-D. Huang, Z.-M., Micromechanical life prediction for composite laminates Hutchinson, J.W., see Boyce, B.L.
(11) 679
Indrakanti, S.S., see Nemat-Nasser, S. Ito, N., see Biwa, S. Ito, N., see Tobushi, H. Jiang, C.P., Z.H. Tong and Y.K. Cheung, A generalized self-consistent method for piezoelectric ®ber reinforced composites under antiplane shear Kawagishi, Y., M. Shozu and Y. Hirose, Experimental evaluation of stress ®eld around crack tip by caustic method Kim, J.H., H.J. Moon and Y.Y. Earmme, Inplane and antiplane T-stresses for an interface crack in anisotropic bimaterial Klepaczko, J.R., see Brara, A. Kumar, R.S. and R. Talreja, Linear viscoelastic behavior of matrix cracked cross-ply laminates Kwon, S.M. and K.Y. Lee, Constant moving crack in a piezoelectric block: anti-plane problem Lavrov, A., Kaiser eect observation in brittle rock cyclically loaded with dierent loading rates Lazzeri, A., see Socrate, S. Lee, K.W., J.H. Lim and Y.Y. Earmme, A screw dislocation interacting with an interfacial crack in two anisotropic thin ®lms with ®nite thickness Lee, K.Y., see Kwon, S.M. Lee, S., see Wang, S.-D. Leon, R. and Y.J. Weitsman, Time-to-failure of randomly reinforced glass strand/urethane matrix composites: data, statistical analysis and theoretical prediction Li, C. and G.J. Weng, Dynamic stress intensity factor of a cyclindrical interface crack with a functionally graded interlayer Li, S., see Han, S.
(5) 251
(5) (10) (12) (3)
267 545 741 105
(4) 185 (8) 441 (8) 425 (12) 717 (10) 545
(5) 295
(12) 741 (1) 21 (1) 33 (3) 139 (11) 649
(11) 669 (3) 155
(2) 97 (11) 649 (2) 105
(3) 127 (6) 325 (5) 251
Li, S., see Han, S. Lim, J.H., see Lee, K.W. Madgwick, A., T. Mori, P.J. Withers and K. Wakashima, Steady-state creep of a composite Mall, S., J.L. Hamrick II and T. Nicholas, High cycle fatigue behavior of Ti±6Al±4V with simulated foreign object damage Maranini, E. and T. Yamaguchi, A non-associated viscoplastic model for the behaviour of granite in triaxial compression Mariotti, C., see Brara, A. Meguid, S.A. and Z.T. Chen, Transient response of a ®nite piezoelectric strip containing coplanar insulating cracks under electromechanical impact Meijer, H.E.H., see van der Sluis, O. Mendels, D.A., see Nairn, J.A. Miloh, T., see Benveniste, Y. Moon, H.J., see Kim, J.H. Mori, T., see Madgwick, A. Mu, Y., see Sumi, Y. Mueller, R. and D. Gross, A time-dependent constitutive law for materials with microstructural evolution Nairn, J.A. and D.A. Mendels, On the use of planar shear-lag methods for stress-transfer analysis of multilayered composites Nemat-Nasser, S., W.-G. Guo, V.F. Nesterenko, S.S. Indrakanti and Y.-B. Gu, Dynamic response of conventional and hot isostatically pressed Ti±6Al±4V alloys: experiments and modeling Nemat-Nasser, S., Editor's note Nemat-Nasser, S., see Cheng, J. Nesterenko, V.F., see Nemat-Nasser, S. Nicholas, T., see Mall, S. Ohno, N., see Biwa, S. Okumura, K., see Tobushi, H. Olsson, W.A., Quasistatic propagation of compaction fronts in porous rock Ouadfel, H. and L. Rothenburg, `Stress±force± fabric' relationship for assemblies of ellipsoids Paoni, B., see Robbe-Valloire, F. Progri, R., see Robbe-Valloire, F. Pyrz, R., see Schjùdt-Thomsen, J. Ravichandran, G., see Guduru, P.R. Reiterer, A. and S.E Stanzl-Tschegg, Compressive behaviour of softwood under uniaxial loading at dierent orientations to the grain Ritchie, R.O., see Boyce, B.L. Robbe-Valloire, F., B. Paoni and R. Progri, Load transmission by elastic, elasto-plastic
(5) 267 (2) 97
(9) 493 (11) 679 (5) 283 (1) 33
(2) (9) (6) (6) (1) (9) (2) (2)
85 499 335 309 21 493 121 63
(6) 335
(8) (3) (11) (8) (11)
425 123 603 425 679
(12) 717 (10) 545 (11) 659 (4) 201 (11) 617 (11) 617 (10) 531 (7) 371 (12) 705 (8) 441
Author Index Volume 33 or fully plastic deformation of rough interface asperities RodrõÂguez-Ramos, R., see Bravo-Castillero, J. RodrõÂguez-Ramos, R., F.J. Sabina, R. GuinovartDõÂaz and J. Bravo-Castillero, Closed-form expressions for the eective coecients of a ®ber-reinforced composite with transversely isotropic constituents ± I. Elastic and square symmetry Rosakis, A.J., see Guduru, P.R. Rothenburg, L., see Ouadfel, H. Rousseau, C.-E. and H.V. Tippur, Dynamic fracture of compositionally graded materials with cracks along the elastic gradient: experiments and analysis Rudnicki, J.W., see Albert, R.A. Sabina, F.J., see Bravo-Castillero, J. Sabina, F.J., see RodrõÂguez-Ramos, R. Schjùdt-Thomsen, J. and R. Pyrz, The Mori±Tanaka stiness tensor: diagonal symmetry, complex ®bre orientations and non-dilute volume fractions Schreurs, P.J.G., see van der Aa, M.A.H. Schreurs, P.J.G., see van der Sluis, O. Searcy, C.R., see Allen, D.H. Shozu, M., see Kawagishi, Y. Smith, D.J., see Han, S. Smith, D.J., see Han, S. Socrate, S., M.C. Boyce and A. Lazzeri, A micromechanical model for multiple crazing in high impact polystyrene Somlo, B. and V. Gupta, A hydrophobic self-assembled monolayer with improved adhesion to aluminum for deicing application Stanzl-Tschegg, S.E, see Reiterer, A. Sumi, Y. and Y. Mu, Erratum to ``Thermally induced quasi-static wavy crack propagation in a brittle solid'' [Mech. Mater. 32 (2000) 531± 542] Sze, K.Y., see Fan, H.
(11) 617 (4) 237
(4) 223 (7) 371 (4) 201
(7) 403 (1) 47 (4) 237 (4) 223
(10) (10) (9) (3) (12) (5) (5)
531 555 499 177 741 251 267
(3) 155 (8) 471 (12) 705
(2) 121 (6) 363
Talreja, R., see Kumar, R.S. Tippur, H.V., see Rousseau, C.-E. Tobushi, H., K. Okumura, S. Hayashi and N. Ito, Thermomechanical constitutive model of shape memory polymer Tong, J., see Zhao, L.G. Tong, Z.H., see Jiang, C.P. Van de Steen, B. and A. Vervoort, Non-local stress approach to fracture initiation in laboratory experiments with a tensile stress gradient Van der Aa, M.A.H., P.J.G. Schreurs and F.P.T. Baaijens, Modelling of the wall ironing process of polymer coated sheet metal Van der Sluis, O., P.J.G. Schreurs and H.E.H. Meijer, Homogenisation of structured elastoviscoplastic solids at ®nite strains Vermeulen, B., see Zhao, L.G. Vervoort, A., see Van de Steen, B. Wakashima, K., see Madgwick, A. Wang, M.-Z., see Gao, C.-F. Wang, S.-D., S. Lee and C.-H. Hsueh, Eect of substrate modulus dierence on dislocation formation in an epitaxial ®lm Wang, X. and S. Yu, Transient response of a crack in piezoelectric strip subjected to the mechanical and electrical impacts: mode-I problem Weitsman, Y.J., see Leon, R. Weng, G.J., see Li, C. Withers, P.J., see Madgwick, A. Yamaguchi, T., see Maranini, E. Yu, S., see Wang, X. Zhao, L.G., J. Tong, B. Vermeulen and J. Byrne, On the uniaxial mechanical behaviour of an advanced nickel base superalloy at high temperature
761 (3) 139 (7) 403 (10) 545 (10) 593 (5) 295
(12) 729 (10) 555 (9) 499 (10) 593 (12) 729 (9) 493 (1) 1 (2) 105
(1) (3) (6) (9)
11 127 325 493
(5) 283 (1) 11
(10) 593