Coating and layer thickness measurement

Coating and layer thickness measurement

COATING AND LAYER THICKNESS 4daptiue Analyzer Technologies HAGNECIC THICKNESS MEASUREMENT iccurately control coatings and layers using Ghickness ...

216KB Sizes 3 Downloads 139 Views

COATING AND LAYER THICKNESS

4daptiue Analyzer

Technologies

HAGNECIC THICKNESS

MEASUREMENT

iccurately control coatings and layers using Ghickness measuring systems offered for QC lab, St-line, and real-time process measurements by 2arl Zeiss GmbH, a recognized leader in precision optical systems for the last 150 years. White light interference analysis is used for measurements :overing standard ranges in the 3.0 to 150 microns range. Adaptive Analyzer Technologies (ATECH), is the Exclusive U.S./Canada Distributor.

Circle 160 on reader information

TESTER

Magne-Gage Sales & Service Co. , Avoca, Pa.

Inc., New York

flagne-Gage magnetic tester has been widely used n the industry for 50 years. It measures the magletic attraction between a small selected magnet md the substrate or coating of the material being ;ested. It indicates on a graduated dial the degree of ?orce required to detach its magnet from the surface If the specimen. Information on new gauges or 3.E.M. service, repair parts, or calibrations to the .ndustry standards are available.

card

Circle 161 on reader information

card

CLEANHOOKS STOP throwing away small “disposable” hooks!!! We can make them like new For less $$ than new. We STRIP all sizes. Fixtures-Racks-Hooks-Rejeds CCCF~Tt**

888-801-2358 (toll free) 882-329-2134

Continuously

Remove Copper from Your Nickel Bath with the DummycellTM

Our new DummycelP can sit on the bottom of your nickel tank and continuous ly remove copper while you plate with no nickel co-plate. The DummycelP will keep your bath to less than 2 ppm copper and you do nothing! Forget about after-hours maintenance, parts lost to poor quality, expensive additives that are just a band-aid. Give your main rectifier a break. Try the DummycelP for thirty days with no obligation. Call (201) 944-8053 today to find out how.

Diamond industrial Servkes P.O.Box 9487 Columbus, Mississippi

39705

Circle 022 on reader card or go to www.thru.to/webconnect May 2002

EESI PMPC

Precious Metals Processing Consultants, Inc. 430 Bergen Boulevard * Palisades Park, NJ 07650 (201) 944-8053 * Fax (201) 944-8003 E-mail: [email protected] www.oreciousmetals-amDc.com

Circle 050 on reader card or go to www.thru.to/webconnect 25