Corrigendum to “Micromechanics-based constitutive modeling for unidirectional laminated composites” [Int. J. Solids Struct. 43 (2006) 5674–5689]

Corrigendum to “Micromechanics-based constitutive modeling for unidirectional laminated composites” [Int. J. Solids Struct. 43 (2006) 5674–5689]

International Journal of Solids and Structures 44 (2007) 5802 www.elsevier.com/locate/ijsolstr Corrigendum Corrigendum to ‘‘Micromechanics-based con...

69KB Sizes 0 Downloads 28 Views

International Journal of Solids and Structures 44 (2007) 5802 www.elsevier.com/locate/ijsolstr

Corrigendum

Corrigendum to ‘‘Micromechanics-based constitutive modeling for unidirectional laminated composites’’ [Int. J. Solids Struct. 43 (2006) 5674–5689] Z. Liang a, H.K. Lee a

b,*

, W. Suaris

a

Department of Civil, Architectural and Environmental Engineering, University of Miami, Coral Gables, FL 33124-06-0620, United States b Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, Guseong-dong, Yuseong-gu, Daejon 305-701, Republic of Korea Available online 19 March 2007

~ in the above-referenced paper. An error occurs in the expression of parameters of a fourth-rank tensor F The numerators of Eqs. (16), (19), and (21) should be replaced by 3, (1 4m1), and (3 4m1), respectively. Accordingly, this error may have a minor influence on the relevant predictions.

*

DOI of original article: 10.1016/j.ijsolstr.2005.08.020 Corresponding author. Tel.: +82 42 869 3623. E-mail address: [email protected] (H.K. Lee).

0020-7683/$ - see front matter Ó 2007 Published by Elsevier Ltd. doi:10.1016/j.ijsolstr.2007.03.010