- Email: [email protected]
Erratum to “An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates” [Compos Sci Technol 2009;69(11–12):1735–1745]
Composites Science and Technology 72 (2012) 1791
Contents lists available at SciVerse ScienceDirect
Composites Science and Technology journal homepage: www.elsevier.com/locate/compscitech
Erratum
Erratum to ‘‘An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates’’ [Compos Sci Technol 2009;69(11–12):1735–1745] Stefano Bennati, Massimiliano Colleluori, Domenico Corigliano, Paolo S. Valvo ⇑ Department of Civil Engineering (Structures), University of Pisa, Largo Lucio Lazzarino (formerly Via Diotisalvi, 2), I-56126 Pisa, Italy
The authors regret that typos were present in some equations of their paper, and would like to give an erratum. The authors apologise for any inconvenience this may have caused.
DOI of original article: http://dx.doi.org/10.1016/j.compscitech.2009.01.019
⇑ Corresponding author. Tel.: +39 050 2218200; fax: +39 050 2218201. E-mail address: [email protected] (P.S. Valvo). 0266-3538/$ - see front matter Ó 2012 Elsevier Ltd. All rights reserved. http://dx.doi.org/10.1016/j.compscitech.2012.07.013
1. In Eqs. (11), (14), (23), and (26), each occurrence of kx should be replaced by kz. 2. In Eq. (27), the term k2i =kx should be replaced by k2i =kz .
Contents lists available at SciVerse ScienceDirect
Composites Science and Technology journal homepage: www.elsevier.com/locate/compscitech
Erratum
Erratum to ‘‘An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates’’ [Compos Sci Technol 2009;69(11–12):1735–1745] Stefano Bennati, Massimiliano Colleluori, Domenico Corigliano, Paolo S. Valvo ⇑ Department of Civil Engineering (Structures), University of Pisa, Largo Lucio Lazzarino (formerly Via Diotisalvi, 2), I-56126 Pisa, Italy
The authors regret that typos were present in some equations of their paper, and would like to give an erratum. The authors apologise for any inconvenience this may have caused.
DOI of original article: http://dx.doi.org/10.1016/j.compscitech.2009.01.019
⇑ Corresponding author. Tel.: +39 050 2218200; fax: +39 050 2218201. E-mail address: [email protected] (P.S. Valvo). 0266-3538/$ - see front matter Ó 2012 Elsevier Ltd. All rights reserved. http://dx.doi.org/10.1016/j.compscitech.2012.07.013
1. In Eqs. (11), (14), (23), and (26), each occurrence of kx should be replaced by kz. 2. In Eq. (27), the term k2i =kx should be replaced by k2i =kz .