Replaceable pin racking system

POLYPIIOPYLDIE DIPPING BASKETS

REPLACEAllLE PIN RACKING SYSTEM

Imperial Industries Inc., Belleville, Mich.

Philip Machine Co., N. Providence, R.l.

Imperial Industries' polypropylene dipping baskets are fabricated of o/16-in. thick high-impact polypropylene copolymer. The notched Izod test of this material shows no break. Baskets are stocked in 12-in. diameter x 12 in. high, 10 in. x 10 in., and 8 in. x 8 in. Custom-fabricated sizes are available in round, square, or rectangular shapes. Sidewalls and bottom are manually welded with 3-pass welds using inert gas. Top and bottom bands are placed on the exterior wall for additional sidewall support. Handles are solid polypropylene or stainless steel. These baskets offer a cost savings over stainless steel. The 12-in. basket weighs only 4 lb. Custom-fabricated baskets are available in 3fs-in. or Y2-in. thick high-impact polypropylene.

For metal finishers Philip Machine's replaceable pin system is an economical method to maximize rack life. Their detachable wire forms allow the user to replace the holding pins within minutes without replacing the entire rack. There is no stripping and no burn off. Hundreds of different wire-formed holding pins are available for attachment to plastisol- or nylon-coated fixtures.

/

/

Fixture

\

Circle 160 on reader information card

ample pins Circle 161 on reader information card

MAIlIIUAL AND AlII-POWERED RACKING EGUIPM....

Endura Corp., Nokomis, Fla.

Endura's line of manual and air-powered racking equipment can increase small part racking and unracking while virtually eliminating rackingand unracking-induced carpal tunnel syndrome. Endura also manufactures custom-tension racks for the plating, painting, and anodizing industries. Circle 162 on reader information card

November 1999

27