- Email: [email protected]
Retraction notice to: “Repetitive tube expansion and Shrinking (RTES) as a novel SPD method for fabrication of nanostructured tubes” [Mater. Sci. Eng. A 596 (2014) 194–199]
Materials Science & Engineering A 621 (2015) 287
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to: “Repetitive tube expansion and Shrinking (RTES) as a novel SPD method for fabrication of nanostructured tubes” [Mater. Sci. Eng. A 596 (2014) 194–199] H. Jafarzadeh, K. Abrinia, A. Babaei Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, P.O. Box 11155-4563, Iran
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. The authors have plagiarized part of a paper that had already appeared in [Mater. Sci. Eng. A, 528 (2011) 3930-3934, 10.1016/j. msea.2011.01.028]. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
DOI of original article: http://dx.doi.org/10.1016/j.msea.2013.12.037 http://dx.doi.org/10.1016/j.msea.2014.11.029 0921-5093/& 2014 Elsevier B.V. All rights reserved.
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to: “Repetitive tube expansion and Shrinking (RTES) as a novel SPD method for fabrication of nanostructured tubes” [Mater. Sci. Eng. A 596 (2014) 194–199] H. Jafarzadeh, K. Abrinia, A. Babaei Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, P.O. Box 11155-4563, Iran
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. The authors have plagiarized part of a paper that had already appeared in [Mater. Sci. Eng. A, 528 (2011) 3930-3934, 10.1016/j. msea.2011.01.028]. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
DOI of original article: http://dx.doi.org/10.1016/j.msea.2013.12.037 http://dx.doi.org/10.1016/j.msea.2014.11.029 0921-5093/& 2014 Elsevier B.V. All rights reserved.