The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers

The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers

Accepted Manuscript The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers ...

691KB Sizes 189 Downloads 238 Views

Accepted Manuscript The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers Abigail B. Snyder, Randy W. Worobo PII:

S0956-7135(17)30459-0

DOI:

10.1016/j.foodcont.2017.09.025

Reference:

JFCO 5797

To appear in:

Food Control

Please cite this article as: Abigail B. Snyder, Randy W. Worobo, The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers, Food Control (2017), doi: 10.1016/j.foodcont.2017.09.025 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.

ACCEPTED MANUSCRIPT

Highlights 51 juice manufacturers surveyed revealed the importance of microbial spoilage



71.5% indicated spoilage mattered a great deal in brand protection



69% had discarded ingredients or product due to quality



92% had experienced yeast or mold spoilage in finished product



69% said improved sanitation strategies would be useful

AC C

EP

TE D

M AN U

SC

RI PT



ACCEPTED MANUSCRIPT

1 2

The incidence and impact of microbial spoilage in the production of fruit and vegetable juices as reported by juice manufacturers

3

TE D

M AN U

SC

RI PT

Abigail B. Snydera# and Randy W. Worobob

a

EP

Department of Extension, The Ohio State University, 1680 Madison Ave, Wooster, OH 44691, United States; b Department of Food Science, Cornell University, 411 Tower Rd., Ithaca, NY 14853 United States

#

AC C

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Corresponding author

Email: [email protected] Department of Extension 1680 Madison Ave Wooster, OH 44691

Keywords: Juice spoilage, microbial quality, manufacturer survey

ACCEPTED MANUSCRIPT 2 46 47 48

ABSTRACT

49

quality and an area of concern in reducing food waste. Despite this, relatively little research is

50

dedicated to microbial spoilage compared to other aspects of food microbiology. Establishing the

51

incidence and impact of microbial spoilage in juice production would provide justification for

52

future research. In this study, we present the findings from a survey of juice processor members

53

of the U.S. based Juice Products Association and the European based International Fruit and

54

Vegetable Juice Association (31.1% response rate). Respondents were asked a series of forced

55

choice, Likert-type, and open response questions regarding microbial juice quality challenges

56

and control measures regarding their facility. The vast majority of respondents (97.4%) indicated

57

that spoilage mattered a lot or a great deal in brand protection. An additional 89.5% indicated

58

that better control over microbial food spoilage would reduce waste and increase profits, with

59

57.9% indicating a lot or a great deal of impact, perhaps as a result of the frequency with which

60

respondents indicated they discarded ingredients or product to protect quality. The most frequent

61

disposition reportedly occurred on a weekly basis, with over half of respondents indicating

62

discarding ingredients or product at least annually. Manufacturers reported a range of challenges,

63

notably spoilage from Alicyclobacillus and heat resistant mold. This was accompanied by an

64

identified need for associated sanitation and production control strategies. This work provides a

65

basis for subsequent research exploring improved control strategies and detection methods used

66

to reduce microbial spoilage of fruit and vegetable juices.

67 68 69 70 71 72

Keywords: Juice quality, microbial spoilage, heat resistant mold, Alicyclobacillus

AC C

EP

TE D

M AN U

SC

RI PT

Microbial spoilage of fruit and vegetable juices represents an important threat to food

ACCEPTED MANUSCRIPT 3 73 74 75 76 77

1. INTRODUCTION 1.1 Food waste and loss Food quality issues resulting from microbial food spoilage are a significant problem within the food industry that result in waste, customer dissatisfaction, and that threaten brand

79

protection. Global estimates on food waste and loss suggest that 40% of the food supply is not

80

consumed due to pre-harvest loss or post-harvest food waste (FAO, 2012). Specifically, 25% of

81

the post-harvest food supply may be wasted due to microbial food spoilage (Gram et al., 2002).

82

Fresh produce and processed fruit and vegetable products are particularly susceptible to spoilage.

83

The Food and Agriculture Organization (FAO) of the United Nations estimates that

84

approximately 45% of grown produce is wasted (FAO, 2012).

SC

M AN U

85

RI PT

78

Historically, relatively little research has been conducted in the area of food quality/spoilage (Fig. 1). Food laws and regulations are focused on food safety and public health,

87

as opposed to quality and microbial spoilage. Federal research dollars have, likewise, been

88

directed towards reducing the incidence of foodborne illness, while the majority of food security

89

research has targeted pre-harvest loss specific to crop and food animal disease resistance and

90

prevention (USDA, 2016). However, food waste occurs throughout the supply chain and in the

91

developed world, waste is shifted towards the consumer end of the farm-to-fork spectrum.

EP

TE D

86

1.2 Microbial food spoilage in fruits and vegetable products

93

Produce is often grown and handled in unprotected, natural environments which contribute to

94

the level and diversity of microbial contamination (Leff & Fierer, 2013). Although plants possess

95

defense systems against microbial spoilage, following harvest and senescence, these defenses are

96

diminished and the fruit or vegetable becomes particularly susceptible to colonization by

97

secondary plant pathogens (Barth et al., 2009).

AC C

92

ACCEPTED MANUSCRIPT 4 98

Initial microbial load can vary based on horticultural practices, employee health and hygiene, and aspects related to the field and surrounding areas. Older fields and orchards, or locations

100

where dead and decaying plant material is not frequently removed, can create harborages of

101

spoilage microorganisms. Cultural practices which involve increased manipulation, crop rotation,

102

the use of plant-based amendments, and the lack of conventional pesticides impact the initial

103

microbial population at the point of harvest (van Elsas et al., 2002). Additionally, the source of

104

the agricultural water, use of particular growth substrates and insulation materials, and whether

105

production environments are covered, enclosed, or open, all contribute to the potential for

106

contamination.

SC

M AN U

107

RI PT

99

At the point of harvest, the rigidity of the culling procedures can impact downstream spoilage potential. The utilization of drops (produce that has fallen to the ground) can introduce

109

additional microorganisms. Similarly, the use of bruised or wounded fruits or vegetables can

110

increase the potential for spoilage as wounds and lesions are niches where spoilage organisms

111

may survive and proliferate more readily than on intact surfaces (Snyder et al, 2016). Sanitation

112

in the production environment mediates the buildup of organic material and vegetative waste on

113

production lines that serve as reservoirs of spoilage organisms (Barth et al., 2009). Bottling or

114

filling areas often require protection and treatment as critical quality points to prevent the

115

introduction of environmental contaminants. For example, air quality monitoring can be essential

116

as the spores of filamentous fungi often become airborne during the normal reproductive cycle

117

which facilitates dissemination and propagation (Codina et al., 2008).

EP

AC C

118

TE D

108

The relevant specific spoilage organism associated with a particular juice is dependent on

119

the type of fruit or vegetable used as ingredients, and the type of processing the juice receives

120

(Gram et al., 2002). Low acid vegetable juices are subject to spoilage from a variety of

ACCEPTED MANUSCRIPT 5 microorganisms which include Gram-negative bacteria associated with vegetable soft rot, like

122

Pseudomonas and various Enterobacteriaceae such as Pectobacterium, as well as Gram-positive

123

bacterial sporeformers (Barth et al., 2009). Although non-thermal techniques have gained

124

popularity among juice processors over the past decade, the majority of juice produced in the

125

U.S. has undergone a thermal pasteurization (Mintel, 2009). Heat treatment, particularly at

126

temperatures used in producing shelf-stable products, selects for heat resistant ascospores from

127

fungi like Paecilomyces (Byssochlamys) and Aspergillus, as well as bacterial spore-formers

128

(Splittstoesser, 1996). The additional selective pressure from acidic fruit juices renders the

129

bacterial spore former Alicyclobacillus particularly problematic. Alicyclobacillus spoilage is not

130

associated with visual defect, the production of detectable off-flavors occurs well below the

131

visual detection limit (Walker & Phillips, 2008). In contrast, heat resistant molds, or HRM, are

132

associated primarily with visual defects. HRMs have posed a chronic challenge for juice

133

producers as the heat resistant ascospores can be found as contaminants in the raw ingredients

134

and the processing environment (Dijksterhuis, 2007; Tournas, 1994). Particularly with the

135

growing popularity of plastic containers which lack a true hermetic seal, there has been an

136

increased potential for spoilage incidents resulting from Alicyclobacillus and HRMs (Sperber,

137

2009). Based on the history of challenges plaguing juice manufacturers, these two spoilage

138

microorganisms were specifically addressed in this survey.

AC C

EP

TE D

M AN U

SC

RI PT

121

139

1.3 Available data on the impact of microbial spoilage in the food industry

140

Despite the contribution of microbial spoilage to waste and loss in the food supply, there

141

remains a need for data quantifying the contribution of microbial spoilage from the point of

142

production through shelf-life. There is limited work establishing the incidence and impact of

143

microbial food spoilage on ingredient loss and finished product spoilage. Based on the number of

ACCEPTED MANUSCRIPT 6 published abstracts relating to food science and technology, research focused on food safety has

145

drastically increased since the mid-1980’s (Fig. 1). This bibliometric assessment is based on

146

literature containing specific search terms. The term “food safety” may have gained popularity

147

around 1985 as a consequence of the Listeriosis outbreak in California associated with soft,

148

Mexican-style cheese (Linnan et al., 1988). Therefore, the 2,100 abstracts addressing food safety

149

that were published in 1988 represent the initial baseline publication number based on the use of

150

the term (Thomas Reuters, 2016). Well over 12,000 abstracts were published on food safety in

151

2015. In contrast, the number of abstract containing the term “food spoilage” has remained

152

relatively stagnant, well below 500 abstracts per year from 1967 to 2012, with only a modest

153

increase in publication number in the past few years.

SC

M AN U

154

RI PT

144

Eiroa et al. (1999) determined that 14.7% of commercial orange juices (n75) from 11 different suppliers were contaminated with Alicyclobacillus. A survey of 56 UHT juices revealed

156

no detectable contamination, while five of 18 fresh juices contained detectable levels of

157

Alicyclobacillus. Of the U.S. apple juice samples tested, four of four juices and one of four

158

concentrates had detectable levels of Alicyclobacillus with counts ranging from <5 to more than

159

103 CFU/ml (Pettipher et al., 1997). In a study evaluating the prevalence of Alicyclobacillus in

160

tropical and subtropical juice concentrates (n=180) produced or imported into the U.S., 6.1%

161

were positive (Danyluck et al., 2011). A previous study (Walls & Chuyate, 1998) surveyed

162

members of the National Food Processors Association and determined that 35% of juice

163

processors had experienced Alicyclobacillus spoilage of their product. While useful, these data

164

may not reflect some of the changes and current trends in juice production that have influenced

165

industry practices. As mentioned earlier, the use of plastic juice bottles for shelf-stable juices,

166

instead of hot-filling into glass containers with a plastisol-lined metal lid, leads to a change in the

AC C

EP

TE D

155

ACCEPTED MANUSCRIPT 7 headspace composition (Graumlich et al., 1986; Evancho et al., 2009). And the use of thin-

168

walled plastic containers popular for some products requires manufacturers to reduce the thermal

169

process as these containers cannot withstand high temperatures. This is in addition to the demand

170

among consumers for minimal processing, generally, contributing to the increased popularity in

171

the cold-pressed juice market, and minimal or none use of food additives.

172

RI PT

167

Obtaining information on industrial spoilage incidents is difficult as there are no

reportable food quality incidents, unless they have food safety implications as well or if a

174

product withdrawal is initiated. Among U.S. based class III recalls from 2005, the average cost

175

of a spoilage incident due to “mold contamination” or “fermentation” was $2.3 million (Lawlor

176

et al., 2009). Individual companies have little impetus to share food quality challenges despite

177

the need for aggregated data to justify a deserving research area. The lack of data establishing the

178

total impact of microbial spoilage and establishing the organisms with the greatest spoilage

179

potential leaves the food industry susceptible to ongoing quality issues. Despite this, companies

180

may perceive food quality surveys as a potential threat to their brand if they are asked to reveal

181

information regarding quality defects or spoilage incidents, and they may feel that revealing their

182

control strategies and sanitation practices is an infringement on proprietary information.

183

Therefore, anonymous surveys which seek to capture the frequency and incidence of microbial

184

food spoilage issues faced by manufacturers in an anonymous, brief, and non-judgmental format

185

are likely to facilitate participation (Jespersen, 2016). The objective of this study is to present a

186

quantitative assessment of the impact and incidence of microbial spoilage in fruit and vegetable

187

juices as reported by manufacturers by using a survey tool that was iteratively developed through

188

stakeholders in international professional associations of juice manufacturers.

189 190

AC C

EP

TE D

M AN U

SC

173

2. MATERIALS AND METHODS

ACCEPTED MANUSCRIPT 8 191 192

2.1 Survey group

193

Data were collected from two professional juice manufacturer associations between July 22nd and August 5th, 2016. The survey was administered to the Juice Products Association (JPA)

195

based in the United States (120 companies) and the International Fruit and Vegetable Juice

196

Association (IFU) based in Europe (approximately 44 companies). In total, about 164 fruit and

197

vegetable juice manufacturers (juice producers and/or bottlers) received the request for

198

participation in this survey.

SC

RI PT

194

2.2 Survey tool development

200

Questions were initially developed based on relevant spoilage considerations as documented

M AN U

199

in the scientific literature. The prototype of the survey tool was sent to the Technical Affairs

202

committee of the JPA (which included the coordinating IFU member) for review. Suggestions

203

were integrated into the survey, which received a second and final approval from the committee.

204

A description of the study, the benefits provided with participation (none), and anticipated risks

205

(low risk, equivalent to every day internet use) were included on the first page of the survey. The

206

tool was developed using the online platform, Qualtrics (Qualtrics, Provo, UT). Questions were

207

presented as either forced choice (Yes, No, or Not Applicable, as needed), selection from a

208

Likert-type scale, or open fields for discursive responses. Five-point ordinal Likert scales were

209

used to measure respondents’ attitudes regarding microbial spoilage. Interval data were collected

210

on the reported frequency of spoilage events. Respondents were permitted to skip and return to

211

all questions as desired. The survey tool was submitted along with an application for Institutional

212

Review Board exemption to Cornell University’s IRB office and exemption status was received

213

on July 18th, 2016.

214

AC C

EP

TE D

201

2.3 Questionnaire administration

ACCEPTED MANUSCRIPT 9 215

They survey was delivered to participants through a link embedded in an email and distributed to the listservs for the JPA and IFU. Reminder emails were sent one week after the

217

initial email and one day before the survey window closed. No compensation was offered and

218

participation was voluntary and anonymous. Survey responses were received from 51

219

participants (31.1% response rate). Responses were not linked with any identifiable information

220

to protect anonymity.

221

2.4 Data analysis

222

The responses were collated through the Qualtrics user interface and exported to Excel

SC

RI PT

216

(Microsoft Corporation, Redmond, WA). Examination of the data was performed using

224

descriptive principles and tests (e.g. percent total of responses) to explore the impact of various

225

microbial spoilage challenges on juice production (Jespersen, 2016). Due to the ordinal nature of

226

the data, and the distribution of the results, data were reported as the frequencies of the responses

227

or in contingency tables for visualization. Cronbach’s alpha was calculated among respondents

228

who completed all questions using the psych package in RStudio (version 3.3.1, Rstudio, Boston,

229

MA) for the Likert-type data as well as the binary data as a measure of internal consistency

230

among the survey questions.

EP

TE D

M AN U

223

3. RESULTS

235

The relative value of microbial spoilage in terms of its economic impact on fruit and

236

vegetable juice manufacturers needed to be established. Participants were asked to assess the

237

importance of maintaining product quality as it related to brand protection and

238

dedication/conservation of resources through the selection of levels from a Likert-type scale

239

(Fig. 2). Participants overwhelming (71.5%) responded that spoilage mattered a great deal in

AC C

231 232 233 234

3.1 Impact and significance of microbial food spoilage to juice manufacturers

ACCEPTED MANUSCRIPT 10 brand protection, while an additional 26.3% responded that it mattered a lot. The remainder

241

indicated spoilage mattered a moderate amount in brand protection and no respondent indicated

242

that spoilage mattered little or not at all. In terms of the value of dedicating resources towards

243

preventing spoilage, 92.1% of participants indicated that spoilage merited either a great deal or a

244

lot of consideration, and no participants indicated spoilage merited little or no consideration.

245

When asked the extent to which prevention of microbial spoilage would decrease waste and

246

increase profits, 23.7% of respondents indicated it would have a great deal of impact, 34.2%

247

indicated it would have a lot of impact, 31.6% indicated it would moderately impact the

248

reduction of waste and increase of profit, while the remainder, 10.5% indicated it would have a

249

little impact. Collectively, then, 89.5% of manufacturers indicated better control over microbial

250

spoilage would have moderately to greatly increase profits and reduce waste. No participants

251

indicated that better control over microbial food spoilage would not matter in terms of waste

252

reduction and profit increases. Subsequently, the majority of fruit and vegetable juice

253

manufacturers indicated that there was a significant need to control microbial spoilage as part of

254

brand protection and that improved control over microbial spoilage both merits the dedication of

255

resources and, in turn, would improve business efficiency by reducing waste and improving

256

profits.

EP

TE D

M AN U

SC

RI PT

240

3.2 Problem areas and analytical techniques utilized by juice manufacturers

258

The perspective of industry stakeholders on the microbial spoilage issues in juice production

AC C

257

259

should guide research and development efforts to improve quality control strategies to address

260

the areas of need established in section 3.1. Participants were asked a series of Yes or No

261

questions regarding their experiences with particular types of spoilage (Table 1). In regard to

262

fungal food spoilage, 89% of respondents had experienced mold or yeast spoilage in their

ACCEPTED MANUSCRIPT 11 ingredients and 92% of respondents had experienced mold or yeast spoilage in their finished

264

product. More specifically, 64% of participants indicated that had experienced HRM in their

265

finished product, indicating that HRM, as a category, are highly problematic for juice processers.

266

As a consequence, 75% of participants responded that they utilized ingredient or finished product

267

testing for HRM. Patulin, a mycotoxin produced by molds including Penicillium expansium and

268

Paecilomyces (Byssochlamys) spp. is considered a chemical hazard in the production of apple

269

juice (Brause et al., 1995). Apples with core rot or blue/green mold spoilage may be culled to

270

help control this hazard. Of the respondents who manufacture apple juice, 67% reported

271

discarding ingredients or finished product as a patulin control. Finally, 78% of juice processors

272

reported being concerned about Alicyclobacillus contamination. Overall, the findings generated

273

from these survey questions regarding the problematic nature of particular spoilage organisms

274

reveal that issues like fungal spoilage, particularly HRM, and Alicyclobacillus are not challenges

275

faced by a few manufacturers. Even if spoilage issues arise sporadically, across the industry the

276

majority of manufacturers face these challenged and are actively trying to manage threats to their

277

products’ quality.

280 281 282 283 284

SC

M AN U

TE D

EP

279

AC C

278

RI PT

263

ACCEPTED MANUSCRIPT 12

Is Alicyclobacillus contamination a concern for your company? Have you ever experienced heat resistant mold in your finished product? Do you utilize ingredients or finished product testing for heat resistant molds? If you manufacture apple juice products, have you had to discard ingredients or finished product to control patulin? Have you had to discard ingredients or product due to spoilage in the past year?

“Yes” “No” Responses Responses 78% 22%

64%

36%

75%

25%

67%

33%

69%

31%

289

SC

Survey Question

RI PT

Table 1: Incidence of bacterial and fungal spoilage and intervention strategies used in the production of fruit and vegetable juices. Results are reported as the percent of total respondents, excluding answers of “N/A” for product specific questions.

M AN U

285 286 287 288

3.3 Food waste due to the quality deterioration of ingredients or finished product

291

The frequency with which manufacturers discard ingredients or product as a consequence of

292

microbial quality deterioration is an indicator of the impacts that spoilage control strategies may

293

have on reducing food waste and increasing food security. Juice manufacturers were asked to

294

rate on a Likert-like scale the frequency with which they had to discard ingredients or products

295

due to quality concerns. A total of 16.2% of respondents reported discarding ingredients or

296

finished products on no less than a monthly basis due to quality concerns. An additional 40.5%

297

of respondents reported discarding ingredients or product on an annual basis, and 16.2% of

298

respondents answered they discarded ingredients or products every few years. A total of 27% of

299

respondents indicated they rarely or never discarded ingredients or finished product due to

300

quality deterioration.

AC C

EP

TE D

290

ACCEPTED MANUSCRIPT 13 Among the four Likert-scale questions, the Cronbach’s alpha value was determined to be

302

0.57. Alpha increased to 0.65 with the elimination of the question “How frequently have you had

303

to discard ingredients or product due to quality?” Moreover, the binary (yes/no) questions had an

304

alpha level of 0.73. This indicates the responses to the question about disposition frequency had

305

greater variance compared to the rest of the Likert-scale questions, which generally had a strong

306

degree of internal consistency suggesting the survey tool consistently measured the same

307

underlying concepts.

SC

RI PT

301

3.4 Control strategies utilized by juice manufacturers against spoilage microorganisms

309

In addition to ingredient quality, sanitation programs are another primary method

M AN U

308

manufacturers use to manage their food spoilage risks. When juice processors were asked if their

311

sanitation program completely controlled contamination from spoilage microorganisms, 53% of

312

respondents indicated that it did not. Additionally, 69% of respondents indicated that additional,

313

targeted sanitation strategies designed to reduce harborages of spoilage molds would be useful to

314

their company. Manufacturers reported a range of sanitation programs in place at their own

315

facilities designed to reduce food spoilage issues. These included institutionalized food quality

316

programs like SSOPs and HACCP-based plans, CIP/COP sanitation regimes and sanitation

317

verification methods including ATP swabs, microbiological testing, and internal audits. Other

318

manufacturers reported adopting mitigation strategies such as strict maintenance of the cold

319

chain or elevated processing temperatures designed to target spoilage microorganisms.

AC C

EP

TE D

310

320

Respondents were asked what additional work they felt should be addressed in the area of

321

food spoilage, and there were several independent discursive responses that dealt with particular

322

aspects of HRM and Alicyclobacillus spoilage. These included thermal tolerance values, for both

323

organisms, in different food matrices (e.g. high Brix), improved detection methods, and

ACCEPTED MANUSCRIPT 14 prevention from initial contamination. These two microbial spoilage issues received the most

325

repeated comments about the need for additional research. Some respondents had very particular

326

needs for the scientific research, including an improved understanding of the off-flavors

327

produced by Alicyclobacillus and formulation strategies which may be used to control spoilage.

328

However, other areas were addressed sporadically and included issues like biofilm elimination,

329

resistance parameters of yeast to HPP, spoilage prevention in UHT products, anaerobic spores,

330

and lactic acid bacteria. There were several mentions of non-microbial spoilage issues such as

331

haze development in pear juice, adulteration with water or other beverages, and chemical hazards

332

such as mycotoxins and plasticizers. Additionally, some manufacturers voiced concerns over the

333

potential intersection of food spoilage and food safety issues. There also appeared to be a

334

demand for improved risk management for microbial food spoilage. Respondents requested

335

additional mitigation strategies, such as defined rework practices in the hot-fill industry,

336

validation if CIP/COP methods, systematic prevention of cross-contamination, and sanitary

337

controls for cooling water used in production.

SC

M AN U

TE D

4. DISCUSSION AND CONCLUSIONS

EP

338 339 340 341

RI PT

324

Overall, the results of the survey indicated that there is a demand among companies in the fruit and vegetable juice industry for increased control over microbial food spoilage. The

343

preponderance of respondents who indicated that increased control would help in brand

344

protection (Fig. 1) and have positive economic impacts (Fig. 1 and Fig. 3) may explain this

345

response.

346

AC C

342

A spoilage issue resulting in a June, 2016 recall of protein beverages (U.S. FDA, 2016a)

347

affected 3.8 million bottles which had quality defects impacting flavor, aroma, and texture.

348

Similarly, over a dozen SKUs of a second UHT processed protein beverage were also recalled in

ACCEPTED MANUSCRIPT 15 June, 2016 “out of an abundance of caution” and as a result of quality defects that included

350

bloated containers, and off flavors and aromas (U.S. FDA, 2016b). Spoilage by anaerobic spore

351

formers and spoilage of UHT products were both mentioned in the responses from participants

352

about areas of remaining concern, and the effect of these recent recalls may have influenced

353

responses. However, spoilage of low acid juices and beverages by spore formers are, potentially,

354

becoming increasingly relevant as the popularity of vegetable juices increases and various juice-

355

containing dairy and nut milks increases. In 2012 and 2013, consumers reported mold growth in

356

beverage pouches identified by mycelium development that either clogged the straw or became

357

visible once the package was cut open (Wong, 2014; U.S. FDA, 2016c). As a consequence of

358

these spoilage events, some companies have since opted to use a clear panel on their package so

359

that consumers can see that their product is free from mold.

M AN U

SC

RI PT

349

Visibly defective products are often the only spoilage-specific issues that rise to the level of

361

product withdraws. For example, Alicyclobacillus spoilage is not associated with visible defects

362

as the microbial count necessary to generate detectable off-aromas is well below visible

363

detection. Moreover, consumer sensitivity to these off-aromas is highly variable, so that there is

364

not a well-established limit at which consumers reject the product. Therefore, product withdraws

365

due to juice spoilage as a consequence of Alicyclobacillus spoilage are unusual, no associated

366

withdraws are known to the authors. Instead, Alicyclobacillus is a chronic quality defect that

367

plagues the industry, but the problem is not well quantified in the literature.

AC C

EP

TE D

360

368

The respondents indicated a discrepancy between the criteria established in processing and

369

sanitation SOPs, as part of industry best practices developed to target microbial pathogens, and

370

more rigorous criteria needed to control for spoilage microbiota. This response suggested that

371

developing protocols designed targeting more resistant spoilage microorganisms may be an

ACCEPTED MANUSCRIPT 16 effective method for some manufactures to improve product quality and reduce the risk of

373

spoilage. Conditions established for clean-in-place protocols and thermal processing, among

374

other processes, are a function of the target organism, and its relative resistance, used in

375

challenge studies. Previous work has indicated the variability in phenotypic attributes regarding

376

survival and proliferative ability among various isolates, emphasizing the importance of strain

377

selection or cocktail composition in challenge studies. Bacterial and fungal strains which have

378

been adapted to low pH, low water activity, and elevated or depressed temperatures have been

379

shown to provide increased resistance to various treatments in juice (Usaga et al., 2014; Yuk &

380

Schneider, 2006; Mazzotta, 2001). One respondent indicated a need for “good” thermal process

381

values to control for Paecelomyces (Byssochlamys), another respondent indicated a desire for

382

thermal destruction parameters (D, z, and F-values) for Alicyclobacillus spores, a third requested

383

inactivation data for spoilage yeast treated with HPP processing, and a fourth requested CIP

384

treatments validated against more resilient spoilage organisms.

SC

M AN U

TE D

385

RI PT

372

This lack of specific messaging around industry best practices to control microbial spoilage hazards puts the burden on individual manufacturers to develop control strategies. Multiple

387

respondents indicated that they had developed company and product-specific sanitation and

388

processing approaches to control for microbial food spoilage (Table 1 and Fig. 4). These

389

practices included in-house data-based decisions regarding the placement of critical quality

390

points in their food quality plan, the development of elevated processing or hurdle approaches,

391

rigorous sanitation programs, and the use of produce sanitizers and preservatives (Fig. 4). Many

392

sanitation practices have been developed through the lens of controlling contamination from

393

bacterial pathogens, with limited consideration for contamination from sources that are

394

associated with transmission of fungi (Benedict et al., 2016).

AC C

EP

386

ACCEPTED MANUSCRIPT 17 395

Although improvement in food quality is often presented as having positive impacts regarding sustainability and reducing food waste, one respondent pointed to the need for

397

increased research on the tradeoffs between more intense sanitation programs and environmental

398

impacts. The commenter specifically mentioned the impact of releasing waste water containing

399

cleaning and sanitizing agents (salts, caustic or acidic solutions, detergents, etc.). Indeed, there

400

are scant recommendations that are harmonized between the U.S. EPA guidance and GMP/GAP

401

guidance for producers (U.S. EPA, 1999). And, as producers seek to increase the efficacy of their

402

sanitization procedures by adding or increasing sanitizer levels, they also increase the potential to

403

incur negative environmental impacts. Another respondent mentioned using a sanitizer in their

404

flume tank to reduce microbial loads and, similarly, the addition and elevated levels of sanitizer

405

at this step may constitute a tradeoff in environmental considerations.

SC

M AN U

406

RI PT

396

By extension, rigorous cull programs to prevent elevated microbial loads through the addition of low quality produce, as discussed in section 1.2, may also increase food waste.

408

Introduction of such practices may necessitate a diverted use for the culled produce; although,

409

produce destined for juice, like other processed products, may already represent fruits and

410

vegetables which have been culled from fresh market sale. The data presented in Fig. 3

411

illustrated the range in frequency with which respondents reported discarding ingredients or

412

product due to quality, ranging from weekly to never with a normal distribution, but these

413

findings may underlie the responses in Fig. 2 regarding the economic benefit to improving

414

control over microbial spoilage. Even manufacturers who rarely or never discard ingredients or

415

products as a result of quality deterioration may only be able to do so at the cost of a quality

416

program or strict supplier guarantees that, likewise, increase cost and waste at other points in the

417

supply chain. Some respondents indicated a desire for processing conditions designed to target

AC C

EP

TE D

407

ACCEPTED MANUSCRIPT 18 418

more resistant spoilage organisms. While these processes may have non-microbial quality

419

tradeoffs that result from the processing treatment, these approaches may minimize microbial

420

spoilage with less environmental impact. Based on the responses of juice manufacturers to questions regarding the incidence and

RI PT

421

their intervention strategies (Table 1), the presence of Alicyclobacillus and HRM remains a

423

serious threat to juice quality. Per the discursive responses, manufacturers requested improved

424

detection, sanitation, and inactivation strategies against these organisms. Although these

425

microbiological challenges have been known for over 50 years, manufacturers still report

426

remaining needs addressing these problem areas. The data presented in this paper substantiated

427

the need for continued and increased work in the area of microbial food spoilage.

M AN U

SC

422

AC C

EP

TE D

428 429 430

ACCEPTED MANUSCRIPT 19 REFERENCES

432 433 434

Barth, M., Hankinson, T., Zhuang, H., & Breidt, F. (2009). Microbiological Spoilage of Fruits and Vegetables. In Sperber, W. & Doyle, M. (Eds.), Compendium in the Microbiological Spoilage of Foods and Beverages (pp. 135- 183). Springer Science+Business Media, LLC.

435 436 437

Benedict, K., Chiller, T.M., & Mody, R.K. (2016). Invasive Fungal Infections Acquired from Contaminated Food or Nutritional Supplements: A Review of the Literature. Foodborne Pathogens and Disease. 13, 343-349.

438 439

Brause, A.R., Trucksess, M.W., Thomas, F.S., & Page, S.W. (1995). Determination of patulin in apple juice by liquid chromatography: collaborative study. J AOAC Int. 79(2), 451-455.

440 441 442

Codina, R., Fox, R.W., Lockey, R.F., Demarco, P., & Bagg, A. (2008). Typical levels of airborne fungal spores in houses without obvious moisture problems during a rainy season in Florida, USA. Journal of Investigational Allergology and Clinical Immunology. 18(3),156-62.

M AN U

SC

RI PT

431

443 444 445 446

Danyluck, M.D., Friedrich, L.M., Jouquand, C., Goodrich-Schneider, R., Parish, M.E., & Rouseff, R. (2011). Prevalence, concentration, spoilage, and mitigation of Alicyclobacillus spp. in tropical and subtropical fruit juice concentrates. Food Microbiol. 28(3), 472-477.

447

450 451 452 453

Dijksterhuis, J. (2007). Heat-resistant ascospores. In Dijksterhuis, J. & Samson, R.A. (Eds.), Food mycology: a multifaceted approach to fungi and food (pp. 101-117). CRC Press.

TE D

448 449

Eiroa, M.N.U., Junqueira, V.C.A., & Schmidt, F.L. (1999). Alicyclobacillus in Orange Juice: Occurrence and heat resistance of spores. J Food Prot. 62(8), 883-886. Evancho, G.M., Tortorelli, S., & Scott, V.N. (2009). Microbiological spoilage of canned foods. In: Compendium of the Microbiological Spoilage of Foods and Beverages. Eds: Sperber, W.H. and Doyle, M.P. Springer. New York.

457 458

Food and Agriculture Organization (FAO) of the United Nations. (2012). Save Food: Global Initiative on Food Loss and Waste Reduction. http://www.fao.org/save-food/en/. Accessed 2015.

459 460 461

Gram, L., Ravin, L., Rasch, M., Bruhn, J.B., Christensen, A.B., & Givskov, M. (2002). Food spoilage – interactions between food spoilage bacteria. International Journal of Food Microbiology. 78, 79-97.

462 463 464

Graumlich, T.R., Marcy, J.E., & Adams, J.P. (1986). Aseptically packaged orange juice and concentrate: a review of the influence of processing and packaging conditions on quality. Journal of Agricultural and Food Chemistry. 34(3), 402-405.

465 466

Jespersen, L., Griffiths, M., Maclaurin, T., Chapman, B., & Wallace, C. A. (2016). Measurement of food safety culture using survey and maturity profiling tools. Food Control. 66, 174-182.

AC C

EP

454 455 456

ACCEPTED MANUSCRIPT 20 Lawlor, K.A., Schuman, J.D., Simpson, P.G., & Taormina, P.J. (2009). Microbiological Spoilage of Beverages. In: Compendium of the Microbiological Spoilage of Foods and Beverages. Eds: Sperber, W.H. and Doyle, M.P. Springer. New York.

470 471

Leff, J.W. & Fierer, N. (2013). Bacterial Communities Associated with the Surface of Fresh Fruits and Vegetables. PLOS One. http://dx.doi.org/10.1371/journal.pone.0059310.

472 473 474 475

Linnan, M.j., Mascola, L., Lou, X.D., Goulet, V., May, S., Salminen, C., Hird, D. W., Yonekura, M.L., Hayes, P., Weaver, R., Audurier, A., Plikaytis, B.D., Fannin, S.L., Kleks, A., & Broome, C.V. (1988). Epidemic Listeriosis Associated with Mexican-Style Cheese. The New England Journal of Medicine. 319(13), 823-828.

476 477

Mazzota, A.S. 2001. Thermal inactivation of stationary-phase and acid-adapted Escherichia coli O157:H7, Salmonella, and Listeria monocytogenes in fruit juices. J Food Prot. 64(3), 315-320.

478 479

Mintel. Fruit Juice and Juice Drinks – US – January 2009. (2009). http://store.mintel.com/fruitjuice-and-juice-drinks-us-january-2009, Accessed 10.23.16.

480 481 482

Pettipher, G.L., Osmundson, M.E., & Murphy, J.M. (1997). Methods for the detection and enumeration of Alicyclobacillys acidoterrestris and investigation of growth and production of taint in fruit juice and fruit juice-containing drinks. Lett Appl Microbiol. 24(3), 185-189.

483 484 485

Sperber, W.H. (2009). Introduction to the Microbiological Spoilage of Foods and Beverages. In Sperber, W. & Doyle, M. (Eds.), Compendium in the Microbiological Spoilage of Foods and Beverages (pp. 1-40). Springer Science+Business Media, LLC.

486 487

Splittstoesser, D.F. (1996). Microbiology of fruit products. In Somogyi, L.P. & Ramaswamy, Y.H. (Eds), Processing fruits: Science and Technology (pp. 261-292). Technomic Basel.

488 489 490

Snyder, A.B., Perry, J.J., & Yousef, A. E. (2016). Developing and optimizing bacteriophage treatment to control enterohemmorrhagic Escherichia coli on fresh produce. International Journal of Food Microbiology. 236, 90-97.

491 492

Snyder, A.B., Churey, J.J., & Worobo, R.W. (2016). Characterization and control of Mucor circinelloides spoilage in yogurt. International Journal of Food Microbiology. 228, 14-21.

493 494 495

Thomas Reuters. (2016). Web of Science. Food Science & Technology Abstracts. http://thomsonreuters.com/en/products-services/scholarly-scientific-research/scholarly-searchand-discovery/fsta.html. Accessed 10.23.16.

496 497 498

Tournas, V. (1994). Heat-resistant fungi of importance to the food and beverage industry. Critical Reviews in Microbiology. 20(4), 243-63.

499 500

United States Department of Agriculture. National Institute of Food and Agriculture. Agricutlure and Food Research Initiative – Food Security Challenge Area (2016).

AC C

EP

TE D

M AN U

SC

RI PT

467 468 469

ACCEPTED MANUSCRIPT 21 501 502

https://nifa.usda.gov/funding-opportunity/agriculture-and-food-research-initiative-food-securitychallenge-area-rfa Accessed 10.23.16.

503 United States Environmental Protection Agency. (1999). Multimedia Environmental Compliance Guide for Food Processors. National Service Center for Environmental Publications. EPA 305B-99-005.

511

RI PT

504 505 506

512 513 514

United States Food and Drug Administration. (2016b). HP Hood, LLC Voluntarily Recalls Protein Drinks from its Sacramento Facility Due to Premature Spoilage. http://www.fda.gov/Safety/Recalls/ucm507529.htm. Accessed 10.23.16.

507

United States Food and Drug Administration. (2016a). Bolthouse Farms Voluntarily Recalls Protein Beverages Due to Possible Spoilage. http://www.fda.gov/Safety/Recalls/ucm508221.htm. Accessed 10.23.16

SC

508 509 510

516 517 518

M AN U

515

United States Food and Drug Administration. (2016c). Gerber is Voluntarily Recalling Two Batches of GERBER Organic 2nd FOODS Pouches Due to a Packaging Defect that May Results in Product Spoilage. http://www.fda.gov/Safety/Recalls/ucm492260.htm. Accessed 10.23.16.

519

527 528 529 530

TE D

524 525 526

van Elsas, J.D., Garbeva, P., & Salles, J. (2002). Effects of agronomical measures on the microbial diversity of soils as related to the suppression of soil-borne plant pathogens. Biodegredation. 13(1), 29-40.

EP

523

Usaga, J., Worobo, R.W., & Padilla-Zakour, O.I. (2014). Thermal resistance parameters of acidadapted and unadapted Escherichia coli O157:H7 in apple-carrot juice blends: effect of organic acids and pH. Journal of Food Protection. 4, 528-690.

Walker, M. & Phillips, C. A. (2008). Alicyclobacillus acidoterrestris: an increasing threat to the fruit juice industry. International Journal of Food Science and Technology. 43, 250-260.

AC C

520 521 522

531 532

Walls, I., & Chuyate, R. (1998). Alicyclobacillus — historical perspective and preliminary characterization study. Dairy, Food and Environmental Sanitation. 18, 499-503.

533 534

Wells, J.M. & Uota, M. (1970). Germination and growth of five fungi in low-oxygen and highcarbon dioxide atmospheres. Phytopathology. 60(1), 50-53.

535 536 537

Wong, V. (2014). CapriSun Tackles Mold Problem with a New Pouch and Positive. Bloomberg. http://www.bloomberg.com/news/articles/2014-04-10/capri-sun-tackles-mold-problem-with-anew-pouch-and-positive-spin. Accessed 10.2316.

ACCEPTED MANUSCRIPT 22

EP

TE D

M AN U

SC

RI PT

Yuk, H.G. & Schneider, K.R. (2006). Adaptation of Salmonella spp. in juice stored under refrigerated and room temperature enhances acid resistance to simulated gastric fluid. Food Microbiol. 23(7), 694-700.

AC C

538 539 540

ACCEPTED MANUSCRIPT FIGURES

RI PT

Figure 1: Publications by topic in the Web of Science food science resource database (FSTA). The number of annual abstracts containing the words “food safety” have increased dramatically since 1985 in comparison to the number of annual abstracts containing the words “food spoilage.”

Figure 2: Self-reported impact of microbial food spoilage in fruit and vegetable juices. Results are reported as the percent of total respondents based on a Likert-type scale.

M AN U

SC

Figure 3: Food waste due to quality deterioration among fruit and vegetable juice manufacturers. Results are reported as the percent of total respondents based on a Likert-type scale.

AC C

EP

TE D

Figure 4: Value of sanitation strategies and analytical technique used as controls in microbial food spoilage. Results are reported as (A) the percent of total respondents and (B) discursive responses provided to the question “What sanitation programs and monitoring practices do you use to reduce the potential for microbial food spoilage?”

ACCEPTED MANUSCRIPT

Figure_1

RI PT

14000

10000

SC

8000 6000

M AN U

4000 2000 0

EP

TE D

Food Spoilage

AC C

Number of Publications

12000

Food Safety

ACCEPTED MANUSCRIPT

Figure_2

How much does spoilage matter in brand protection?

70 60

RI PT

50 40 30 20

0

A great deal

70

A little

None at all

How much consideration does spoilage merit?

60 50 40 30 20 10 0

A great deal

70 60 50

A moderate amount

A little

None at all

How much would better control over microbial food spoilage reduce waste and increase profits?

AC C

40

A lot

EP

80

Percent of Total Respondents

A moderate amount

M AN U

Percent of Total Respondents

80

A lot

SC

10

TE D

Percent of Total Respondents

80

30 20 10 0

A great deal

A lot

A moderate amount

A little

None at all

ACCEPTED MANUSCRIPT

45

How frequently have you had to discard ingredients or product due to quality?

40 35 30 25

SC

20 15

5 0

Monthly

Annually Every few Rarely if years ever

EP

TE D

Weekly

M AN U

10

AC C

Percent of Total Respondents

50

RI PT

Figure_3

Never

ACCEPTED MANUSCRIPT

Figure_4

Yes

Yes

No 53%

No

RI PT

(A)

31%

Would additional, targeted sanitation strategies designed to reduce harborages of spoilage molds be useful to your company?

M AN U

47%

SC

Does your sanitation program completely control contamination from spoilage microorganisms?

69%

(B) Reported sanitation programs and monitoring practices ATP swabbing

Microbiological testing

CIP/COP

Ingredient inspection and grading

Antimicrobial treatment

Verification strategies including audits

Strict maintenance of the cold chain

Food safety programs (e.g. HACCP)

Elevated thermal processes

AC C

EP

TE D

SSOPs