- Email: [email protected]
Abrasive blaster
trated, stable liquid addition agent for the production of extremely ductile zinc deposits from alkaline noncyanide solutions. Recommended for use in both rack and barrel operations, it produces a brilliant zinc deposit over a wide current density and zinc metal range. Lustra-Zinc ACF-4000 contains a built-in stress reliever, minimizing flaking and preventing the formation of blisters. Deposits readily accept all conventional postplate treatments. The brightener can be manually or automatically added to the plating bath without dilution. Circle 422 on reader service card
Abrasive Blaster Huntermducfs Inc. Bridgewater, N.J. A new low-cost, miniature abrasive blaster, Micro-Jet 200, is a true pressurefeed system, unlike other low-cost units that are siphon-feed systems. In addition to its application for the shockless cutting and machining of the hardest materials, it is also used for etching and marking, deburring, deflashing, cleaning, and surface finishing. The Micro-Jet 200 also removes conformal coatings from circuit boards without damage to boards or components, providing for selective coating removal in tiny areas.
ptw&ctMty than the competition. Want us to prove it? We’re waiting forA
Circle 080 on reader information card
AdaptaFlow 5000, features an in-line flow meter and DR-1 regulator to precisely measure and control the fluid flow rate to a paint atomizer. By ensuring consistent film builds on workpieces, the controller helps improve both quality and production yields and helps eliminate the need to rework pieces due to unsatisfactory finishes. Circle 424 on reader service card
Circle 423 on readar service card
Fluid Flow Controller I7W Ransburg, An Mnois Tool Works Co. Toledo, Ohio
Centrifugal Fans Illinois Blower Inc. Gary, Ill.
ITW Ransburg’s new microprocessor driven, fluid flow controller, the
Illinois Blower’s HPRB (High Pressure Radial Blade Blower) Centrifugal
METAL FINISHING
??
SEPTEMBER
1997
Fans are available
in a variety of gas-
97
Abrasive Blaster Huntermducfs Inc. Bridgewater, N.J. A new low-cost, miniature abrasive blaster, Micro-Jet 200, is a true pressurefeed system, unlike other low-cost units that are siphon-feed systems. In addition to its application for the shockless cutting and machining of the hardest materials, it is also used for etching and marking, deburring, deflashing, cleaning, and surface finishing. The Micro-Jet 200 also removes conformal coatings from circuit boards without damage to boards or components, providing for selective coating removal in tiny areas.
ptw&ctMty than the competition. Want us to prove it? We’re waiting forA
Circle 080 on reader information card
AdaptaFlow 5000, features an in-line flow meter and DR-1 regulator to precisely measure and control the fluid flow rate to a paint atomizer. By ensuring consistent film builds on workpieces, the controller helps improve both quality and production yields and helps eliminate the need to rework pieces due to unsatisfactory finishes. Circle 424 on reader service card
Circle 423 on readar service card
Fluid Flow Controller I7W Ransburg, An Mnois Tool Works Co. Toledo, Ohio
Centrifugal Fans Illinois Blower Inc. Gary, Ill.
ITW Ransburg’s new microprocessor driven, fluid flow controller, the
Illinois Blower’s HPRB (High Pressure Radial Blade Blower) Centrifugal
METAL FINISHING
??
SEPTEMBER
1997
Fans are available
in a variety of gas-
97