- Email: [email protected]
Airless cleaning and stripping system
Rectangular Caps stockcap St. Louis, MO. stockCap offers a large selection of vinyl rectangular caps in over 80 colors, hardnesses,and surface finishes. Flexible caps are easily applied and form a snug fit that resists moisture, dirt, and chemicals. Use on flat wire or bar stock, as handle grips, lever covers, masking aids, insulators, and as product protectors.
Circle 429 on the reader service
card
Electroless Nickel Coating Surface Technology Inc. Trenton, NJ. Illumi-Layer is a composite electroless nickel coating containing phosphorescent, light emitting particles. Under normal incandescent or fluorescent light, the coatings are silvery-gray in color. When an ultraviolet light is shined onto the coating, however, the coating emits a distinctive colored glow. Various colors are available depending on the particles chosen for incorporation into the coating. Applications for the coating are extensive, especially in the areas of authentication and wear indication. Circle 429 on the reader service
Circle 070 on reader information card
Airless Cleaning and Stripping System SerecCorp. Providence,R.I. Serec Corp.‘s Airless MCCS System uses methylene chloride (MC) and other solvents for cleaning and paint stripping. The process will allow the continued use of MC and other solvents in an airless, closed system, as cleaning and stripping agents, while meeting the newly announced OSHA regulations. Typical MCCS cycle times are 20 min and result in no fugitive 74
HVLP Paint Spraying Systems
emissions. Various options include spray, immersion, and agitation.
Circle 427 on the reader service
card
card
Titan Tool Inc. Franklin Lakes, NJ. Titan Tool’s new Pro-Finish Series High Volume, Low Pressure Paint Spraying Systems am engineered to provide superior atomization of today’s fmish coatings. The Pro-Finish series works at high production rates for a wide range of finishing applications. The series is powered by 3- and 4-stage turbines for maximum performance and greater air flow for increased production. The system also includes a new Pro-Finish Spray Gun designed to achieve superior atomization. Circle 430 on the reader service
METAL
card
FINISHING l AUGUST 1997
Circle 429 on the reader service
card
Electroless Nickel Coating Surface Technology Inc. Trenton, NJ. Illumi-Layer is a composite electroless nickel coating containing phosphorescent, light emitting particles. Under normal incandescent or fluorescent light, the coatings are silvery-gray in color. When an ultraviolet light is shined onto the coating, however, the coating emits a distinctive colored glow. Various colors are available depending on the particles chosen for incorporation into the coating. Applications for the coating are extensive, especially in the areas of authentication and wear indication. Circle 429 on the reader service
Circle 070 on reader information card
Airless Cleaning and Stripping System SerecCorp. Providence,R.I. Serec Corp.‘s Airless MCCS System uses methylene chloride (MC) and other solvents for cleaning and paint stripping. The process will allow the continued use of MC and other solvents in an airless, closed system, as cleaning and stripping agents, while meeting the newly announced OSHA regulations. Typical MCCS cycle times are 20 min and result in no fugitive 74
HVLP Paint Spraying Systems
emissions. Various options include spray, immersion, and agitation.
Circle 427 on the reader service
card
card
Titan Tool Inc. Franklin Lakes, NJ. Titan Tool’s new Pro-Finish Series High Volume, Low Pressure Paint Spraying Systems am engineered to provide superior atomization of today’s fmish coatings. The Pro-Finish series works at high production rates for a wide range of finishing applications. The series is powered by 3- and 4-stage turbines for maximum performance and greater air flow for increased production. The system also includes a new Pro-Finish Spray Gun designed to achieve superior atomization. Circle 430 on the reader service
METAL
card
FINISHING l AUGUST 1997