- Email: [email protected]
Antislip and corrosion-resistant flooring
found in traditional Corzan CPVC technology. while providing the capability to withstand operating environments and corrosive fluid services to 225’E Components molded from Corzan X10 CPVC conform with the ASTM D 1784 cell classification, and ASTM F 439 for mechanical design characteristics for fittings. Corzan X10 pipe follows ASTM F 441 (Sch. 80) dimension specifications and material cell class 21445, set forth in ASTM D 4396.
layer to form a raft, giving approximately 95% surface coverage. Specifically designed as an insulation layer for the suppression of evaporation from open surfaces of volatile or hot liquids, Hexies are also effective in retention of odors or vapor in a solution. The unique six-sided shape of the Hexies provides a tightly knit. blanket effect. Field evaporation tests show that the Hexies provide up to 70% reduction in tluid loss.
Antislip and Corrosion-Resistant Flooring Chemgrate Corp. Woodinville, Wash. Chcmdeck is an effective comhination of two existing products. The first part involved is Chemplate, a solid floor plate with the traditional antialip surface and corrosion-resistance characteristics associated with Chemgrate grating. The angular silica particles in
Circle 410 on the reader service card
Polypropylene Bufhgham
Floats
Intl.
Costa Mesa. Calif. Burlingham Intl. announces the addition of the Hexie to their extensive line of plastic metal finishing aids. Hexies
are injection-molded
polypro-
pylene floats, hexagonal in shape, with smooth rounded sides. Once placed on a liquid, Hexies will quickly spread and arrange themselves in a single
Circle 411 on the reader service card
??
Novalytes
. . . to brighten, purify and control plating results!
??
Aldolytes
. . . . to purify, enhance and brighten your zinc, copper, and nickel plating!
??
Aldacs . . . . . . to clean up aluminum,
??
Aquations
??
Aldo-Kotes
. . . to remove suspended solids and sludges, recover oil, treat alkaline cleaners and heavy metal affluents!
. . for brighter chromate conversion for zinc, aluminum,
??
steel, iron, brass, and copper!
Alloy Plating . Cyanide-free
galvanized
coatings in a variety of colors and cadmium-plated surfaces!
zinc alloys of iron, cobalt, nickel and copper!
Or reach us through: IDEAL CHEMICAL&SUPPLY P.O. Box 18698 Memphis, TN 38181-0698 I-800
Circle 005 on reader information
72
CO.
232-6776
card
METAL FINISHING
??
MARCH
1996
the surface of Chemplate help reduce worker slips and falls, even when hazards such as grease, oil. water. and chemicals are present. The second half is the Chemgrate grating itself. In the manufacturing process, the two products are integrally molded into a single structure, forming a strong, one-piece, antislip. corrosion-resistant panel. Circle 412 on the reader service card
Mechanical Cupping Tester BYK-Gardner USA Sliver Spring. Md. BYK-Gardner LJSA announces the addition of a mechanical cupping tester to their line of flexibility instruments. The cupping tester is a manually opcrated instrument used for testing the elongation of coatings on metallic substrates. It includes a magnifying glass and halogen lamp for careful examination of coating system failure. The instrument can also be used for testing adhesion properties of single and multicoat systems. The cupping tester is in accordance with DIN IS0 1520 and features a maximum cupping depth of lh mm and a cylinder head for testing panels up to 6-mm wide. Circle 413 on the reader service card
Ion Exchange System EnviroPure Broadview,
Solutions 111.
In our 75 years in business, we’ve designed and built equipment to clean practically every kind of part imaginable. Our rest cleaning and evaluation labs allow us to prove the process first...our technical staff carefully analyzes the soils and contamination on your parts and recommends the best Process and the right equipment...and our nationwide network of training, service and support people will keep you up and running for decades to come. Worry-F& total solution from a single soarce...Detrex. Standard and Custom Designed Parts Cleaning Equipment ?? Retrofit Packages for Existing Systems ??Testing and Evaluation Studies and Services ??Aqueous, Semi-Aqueous and Solvent Chemicals ??
Start by calling Derrex, today l-800-233-3593.
EnviroPure’s IO-gpm ion cxchangc sy’\tern removes heavy metals from dilute wastewaters. A holding tank contains rinsewater returned from the proare cess. Particulates and organics removed using a prefilter and carbon media tank. Both protect the integrity of the resin contained in two fiberglass tanks working in lead/lag style. When the lead tank reaches capacity, the second is moved into its position. The
EQUIPMENT
DIVISION
401 Emmett Ave.
??Bowling
Green, KY42101
exhausted vessel is taken off-line and transported as a nonregulated material to EnviroPure Solutions’ regeneration facility where the metals are stripped from the resin and recovered for reuse. Nothing goes to landfill. The freshly regenerated tank is brought back onsite. All water can be recirculated or adjusted for pH and sent to drain.
Polymer Alloy Powder Coatings Ferro Corp. Cleveland, Ohio The Powder Coatings Div. of Ferro Corp. has introduced their Vedoc PA ??
MARCH
1996
(800) 233.3593
Circle 095 on reader information
Circle 414 on the reader service card
METAL FINISHING
??Phone:
FAX: (502) 781-3425
card
Polymer Alloy powder coatings, custom engineered with a unique combination of proprietary resins and additives. This line of powder coatings is targeted specifically to major appliance manufacturers. Vedoc PA Polymer Alloy powder coatings meet the demand for increased efficiencies, reduced energy consumplion, improved applied costs, excellence of finish. and reduced environmental concerns. Cure temperatures have been reduced 7-lo!%, allowing manufacturers more flexibility with line speeds and product mix. Circle 415 on the reader service card
73
layer to form a raft, giving approximately 95% surface coverage. Specifically designed as an insulation layer for the suppression of evaporation from open surfaces of volatile or hot liquids, Hexies are also effective in retention of odors or vapor in a solution. The unique six-sided shape of the Hexies provides a tightly knit. blanket effect. Field evaporation tests show that the Hexies provide up to 70% reduction in tluid loss.
Antislip and Corrosion-Resistant Flooring Chemgrate Corp. Woodinville, Wash. Chcmdeck is an effective comhination of two existing products. The first part involved is Chemplate, a solid floor plate with the traditional antialip surface and corrosion-resistance characteristics associated with Chemgrate grating. The angular silica particles in
Circle 410 on the reader service card
Polypropylene Bufhgham
Floats
Intl.
Costa Mesa. Calif. Burlingham Intl. announces the addition of the Hexie to their extensive line of plastic metal finishing aids. Hexies
are injection-molded
polypro-
pylene floats, hexagonal in shape, with smooth rounded sides. Once placed on a liquid, Hexies will quickly spread and arrange themselves in a single
Circle 411 on the reader service card
??
Novalytes
. . . to brighten, purify and control plating results!
??
Aldolytes
. . . . to purify, enhance and brighten your zinc, copper, and nickel plating!
??
Aldacs . . . . . . to clean up aluminum,
??
Aquations
??
Aldo-Kotes
. . . to remove suspended solids and sludges, recover oil, treat alkaline cleaners and heavy metal affluents!
. . for brighter chromate conversion for zinc, aluminum,
??
steel, iron, brass, and copper!
Alloy Plating . Cyanide-free
galvanized
coatings in a variety of colors and cadmium-plated surfaces!
zinc alloys of iron, cobalt, nickel and copper!
Or reach us through: IDEAL CHEMICAL&SUPPLY P.O. Box 18698 Memphis, TN 38181-0698 I-800
Circle 005 on reader information
72
CO.
232-6776
card
METAL FINISHING
??
MARCH
1996
the surface of Chemplate help reduce worker slips and falls, even when hazards such as grease, oil. water. and chemicals are present. The second half is the Chemgrate grating itself. In the manufacturing process, the two products are integrally molded into a single structure, forming a strong, one-piece, antislip. corrosion-resistant panel. Circle 412 on the reader service card
Mechanical Cupping Tester BYK-Gardner USA Sliver Spring. Md. BYK-Gardner LJSA announces the addition of a mechanical cupping tester to their line of flexibility instruments. The cupping tester is a manually opcrated instrument used for testing the elongation of coatings on metallic substrates. It includes a magnifying glass and halogen lamp for careful examination of coating system failure. The instrument can also be used for testing adhesion properties of single and multicoat systems. The cupping tester is in accordance with DIN IS0 1520 and features a maximum cupping depth of lh mm and a cylinder head for testing panels up to 6-mm wide. Circle 413 on the reader service card
Ion Exchange System EnviroPure Broadview,
Solutions 111.
In our 75 years in business, we’ve designed and built equipment to clean practically every kind of part imaginable. Our rest cleaning and evaluation labs allow us to prove the process first...our technical staff carefully analyzes the soils and contamination on your parts and recommends the best Process and the right equipment...and our nationwide network of training, service and support people will keep you up and running for decades to come. Worry-F& total solution from a single soarce...Detrex. Standard and Custom Designed Parts Cleaning Equipment ?? Retrofit Packages for Existing Systems ??Testing and Evaluation Studies and Services ??Aqueous, Semi-Aqueous and Solvent Chemicals ??
Start by calling Derrex, today l-800-233-3593.
EnviroPure’s IO-gpm ion cxchangc sy’\tern removes heavy metals from dilute wastewaters. A holding tank contains rinsewater returned from the proare cess. Particulates and organics removed using a prefilter and carbon media tank. Both protect the integrity of the resin contained in two fiberglass tanks working in lead/lag style. When the lead tank reaches capacity, the second is moved into its position. The
EQUIPMENT
DIVISION
401 Emmett Ave.
??Bowling
Green, KY42101
exhausted vessel is taken off-line and transported as a nonregulated material to EnviroPure Solutions’ regeneration facility where the metals are stripped from the resin and recovered for reuse. Nothing goes to landfill. The freshly regenerated tank is brought back onsite. All water can be recirculated or adjusted for pH and sent to drain.
Polymer Alloy Powder Coatings Ferro Corp. Cleveland, Ohio The Powder Coatings Div. of Ferro Corp. has introduced their Vedoc PA ??
MARCH
1996
(800) 233.3593
Circle 095 on reader information
Circle 414 on the reader service card
METAL FINISHING
??Phone:
FAX: (502) 781-3425
card
Polymer Alloy powder coatings, custom engineered with a unique combination of proprietary resins and additives. This line of powder coatings is targeted specifically to major appliance manufacturers. Vedoc PA Polymer Alloy powder coatings meet the demand for increased efficiencies, reduced energy consumplion, improved applied costs, excellence of finish. and reduced environmental concerns. Cure temperatures have been reduced 7-lo!%, allowing manufacturers more flexibility with line speeds and product mix. Circle 415 on the reader service card
73