Applied Mathematical Modelling 29 (2005) 1271–1276 www.elsevier.com/locate/apm
Author Index to Volume 29 Abdou, M., see Smolentsev, S. Abo-Eldahab, E.M. and M.A. El Aziz, Viscous dissipation and Joule heating effects on MHD-free convection from a vertical plate with power-law variation in surface temperature in the presence of Hall and ion-slip currents Aboobaker, N., D. Blackmore and J. Meegoda, Mathematical modeling of the movement of suspended particles subjected to acoustic and flow fields Adachi, J. and A. Gupta, Simulation-based parametric optimization for long-term asset allocation using behavioral utilities Ag˘pak, K., see Go¨kc¸en, H. Ahn, S., see Hur, S. Al-Fhaid, A., see Mosally, F. Anh, V., see Su, N. Artalejo, J.R., I. Atencia and P. Moreno, A discrete-time Geo[X]/G/1 retrial queue with control of admission Arumuganathan, R. and S. Jeyakumar, Steady state analysis of a bulk queue with multiple vacations, setup times with N-policy and closedown times Atencia, I., see Artalejo, J.R. Attia, H.A., Two-step generation of the equations of motion of closed-chains Azhari, M., A.R. Shahidi and M.M. Saadatpour, Local and post local buckling of stepped and perforated thin plates
Barbieri, E., see Richter, H. Barry, D.A., see Su, N. Bau, H.H., see Qian, S. Belyaev, K.P. and C.A.S. Tanajura, On the correction of perturbations due to data assimilation in ocean circulation models Benecke, S. and J.H. van Vuuren, Modelling torsion in an elastic cable in space Berezkin, V.E., see Lotov, A.V. Berres, S., R. Bu¨rger and E.M. Tory, On mathematical models and numerical simulation of the fluidization of polydisperse suspensions Bhardwaj, N., see Gupta, A.P. Blackmore, D., see Aboobaker, N. Bu¨rger, R., see Berres, S. _ Uzmay, A model of parameter adaptive law with time varying Burkan, R. and I. function for robot control
doi:10.1016/S0307-904X(05)00177-0
29 (2005) 215
29 (2005) 579 29 (2005) 515 29 29 29 29 29
(2005) (2005) (2005) (2005) (2005)
309 373 1164 903 852
29 (2005) 1100 29 (2005) 972 29 (2005) 1100 29 (2005) 1182 29 (2005) 633
29 (2005) 195 29 (2005) 852 29 (2005) 726 29 (2005) 690 29 (2005) 117 29 (2005) 653 29 29 29 29
(2005) (2005) (2005) (2005)
159 137 515 159
29 (2005) 361
1272
Author Index to Volume 29
Chang, C.-T., see Teng, J.-T. Chen, C.-W., Numerical analysis for the multi-phase flow of pulverized coal injection inside blast furnace tuyere Cui, Y., Dynamic programming algorithms for the optimal cutting of equal rectangles Das, S.K., see Das, S.N. Das, S.N. and S.K. Das, Mathematical model for coupled roll and yaw motions of a floating body in regular waves under resonant and non-resonant conditions Dash, M.K., see Roy, D. Dass, A.K., see Pathak, M. Davies, A.M., see Hall, P. ´ .J.M., see Walmag, J.M.B. Delhez, E Delis, A.I. and Th. Katsaounis, Numerical solution of the two-dimensional shallow water equations by the application of relaxation methods Deshmukh, K.C., see Gaikwad, M.N. Dewan, A., see Pathak, M. Diab, L.S., see Mahmoud, M.A.W. Dluhi, K., see Ecsedi, I. Ece, M.C., Free convection flow about a cone under mixed thermal boundary conditions and a magnetic field Ecsedi, I. and K. Dluhi, A linear model for the static and dynamic analysis of nonhomogeneous curved beams El Aziz, M.A., see Abo-Eldahab, E.M. El-Arishy, S.M., see Mahmoud, M.A.W. Enriquez-Remigio, S.A. and A.M. Roma, Incompressible flows in elastic domains: an immersed boundary method approach Eroglu, A., Optimal lot sizing with regular maintenance interruptions [Appl. Math. Modelling 21 (1997) 85–90] Fabritius, T., see Tang, Y. Fenner, R.T., see Tang, W.C. Figueroa, F., see Richter, H. Filippidis, L., see Gwynne, S. Gaikwad, M.N. and K.C. Deshmukh, Thermal deflection of an inverse thermoelastic problem in a thin isotropic circular plate Galea, E.R., see Gwynne, S. Gasimov, R.N., A. Karamancıog˘lu and A. Yazıcı, A nonlinear programming approach for the sliding mode control design Gencer, C., see Go¨kc¸en, H. Go¨kc¸en, H., K. Ag˘pak, C. Gencer and E. Kizilkaya, A shortest route formulation of simple U-type assembly line balancing problem Gupta, A., see Adachi, J. Gupta, A.P. and N. Bhardwaj, Free vibration of polar orthotropic circular plates of quadratically varying thickness resting on elastic foundation
29 (2005) 987 29 (2005) 871 29 (2005) 1040 29 (2005)
19
29 29 29 29 29
(2005) (2005) (2005) (2005) (2005)
19 913 711 533 289
29 29 29 29 29
(2005) (2005) (2005) (2005) (2005)
754 797 711 784 1211
29 (2005) 1121 29 (2005) 1211 29 (2005) 579 29 (2005) 784 29 (2005)
35
29 (2005) 211 29 29 29 29
(2005) (2005) (2005) (2005)
497 1073 195 818
29 (2005) 797 29 (2005) 818 29 (2005) 1135 29 (2005) 373 29 (2005) 373 29 (2005) 309 29 (2005) 137
Author Index to Volume 29
Gwynne, S., E.R. Galea, M. Owen, P.J. Lawrence and L. Filippidis, A systematic comparison of buildingEXODUS predictions with experimental data from the Stapelfeldt trials and the Milburn House evacuation
1273
29 (2005) 818
Haario, H., see Smolianski, A. Hadzˇic´, I., J. Hennig, M. Peric´ and Y. Xing-Kaeding, Computation of flow-induced motion of floating bodies Hall, P. and A.M. Davies, The influence of sampling frequency, non-linear interaction, and frictional effects upon the accuracy of the harmonic analysis of tidal simulations Ha¨rkki, J., see Tang, Y. Hennig, J., see Hadzˇic´, I. Ho, C.J., A continuum model for transport phenomena in convective flow of solid–liquid phase change material suspensions Horvat, A. and B. Mavko, Calculation of conjugate heat transfer problem with volumetric heat generation using the Galerkin method Huang, C.-H., A generalized inverse force vibration problem for simultaneously estimating the time-dependent external forces Hur, S. and S. Ahn, Batch arrival queues with vacations and server setup
29 (2005) 615
Ismail, G.A.F., Numerical treatment of nonlinear mixed delay differential equations
29 (2005) 439
Jain, M., Channel allocation policy in cellular radio network Jeyakumar, S., see Arumuganathan, R. Jing, J.P., G. Meng, Y. Sun and S.B. Xia, On the oil-whipping of a rotor-bearing system by a continuum model
29 (2005) 65 29 (2005) 972
Kamenev, G.K., see Lotov, A.V. Karamancıog˘lu, A., see Gasimov, R.N. Katsaounis, Th., see Delis, A.I. Khatkhate, A.M., see Wang, X. Kim, B.K., see Lee, H.W. Kim, M.J., 3D finite element analysis of evaporative laser cutting Kizilkaya, E., see Go¨kc¸en, H.
29 29 29 29 29 29 29
Lawrence, P.J., see Gwynne, S. Lee, H.W., J.M. Moon, B.K. Kim, J.G. Park and S.W. Lee, A simple eigenvalue method for low-order D-BMAP/G/1 queues Lee, S.W., see Lee, H.W. Leonard II, J.D., see Ni, D. Li, M., An optimal controller of an irregular wave maker Lin, Y.-T., see Yang, S.-A. Liu, F., see Su, N. Liu, G.R., see Liu, M.B. Liu, J., see Zhao, X. Liu, M.B., W.P. Xie and G.R. Liu, Modeling incompressible flows using a finite particle method
29 (2005) 818
29 (2005) 1196 29 (2005) 533 29 (2005) 497 29 (2005) 1196 29 (2005) 805 29 (2005) 477 29 (2005) 1022 29 (2005) 1164
29 (2005) 461
29 29 29 29 29 29 29 29
(2005) (2005) (2005) (2005) (2005) (2005) (2005)
(2005) (2005) (2005) (2005) (2005) (2005) (2005) (2005)
653 1135 754 597 277 938 373
277 277 1054 55 1149 852 1252 1232
29 (2005) 1252
1274
Author Index to Volume 29
Liu, S.-X., B. Teng and Y.-X. Yu, Wave generation in a computation domain Lotov, A.V., G.K. Kamenev, V.E. Berezkin and K. Miettinen, Optimal control of cooling process in continuous casting of steel using a visualization-based multi-criteria approach Luukka, P., see Smolianski, A. Mahmoud, M.A.W., S.M. El-Arishy and L.S. Diab, Testing renewal new better than used life distributions based on U-test Mak, K.L., see Ng, W.C. Mavko, B., see Horvat, A. Meegoda, J., see Aboobaker, N. Meng, G., see Jing, J.P. Miettinen, K., see Lotov, A.V. Mittal, R.C., see Satakshi Mohammed Hosseini, S. and S. Shahmorad, Numerical piecewise approximate solution of Fredholm integro-differential equations by the Tau method Moon, J.M., see Lee, H.W. Moreno, P., see Artalejo, J.R. Mosally, F., A.S. Wood and A. Al-Fhaid, On the convergence of the heat balance integral method Mukherjee, S., see Satakshi Ng, W.C. and K.L. Mak, Yard crane scheduling in port container terminals Ni, D. and J.D. Leonard II, A simplified kinematic wave model at a merge bottleneck Nilakantan, K. and B.G. Raghavendra, Control aspects in proportionality Markov manpower systems Ootao, Y. and Y. Tanigawa, Transient piezothermoelastic analysis of a cross-ply laminated cylindrical panel bonded to a piezoelectric actuator Ouyang, L.-Y., see Teng, J.-T. Owen, M., see Gwynne, S.
29 (2005)
1
29 (2005) 653 29 (2005) 615
29 29 29 29 29 29 29
(2005) (2005) (2005) (2005) (2005) (2005) (2005)
784 263 477 515 461 653 565
29 (2005) 1005 29 (2005) 277 29 (2005) 1100 29 (2005) 903 29 (2005) 565 29 (2005) 263 29 (2005) 1054 29 (2005)
85
29 (2005) 321 29 (2005) 987 29 (2005) 818
Pantokratoras, A., Effect of viscous dissipation in natural convection along a heated vertical plate Park, J.G., see Lee, H.W. Pathak, M., A. Dewan and A.K. Dass, An assessment of streamline curvature effects on the mixing region of a turbulent plane jet in crossflow Peric´, M., see Hadzˇic´, I. Pollock, D., see Revankar, S.T.
29 (2005) 711 29 (2005) 1196 29 (2005) 341
Qian, S. and H.H. Bau, Theoretical investigation of electro-osmotic flows and chaotic stirring in rectangular cavities Qin, Q.-H., Formulation of hybrid Trefftz finite element method for elastoplasticity
29 (2005) 726 29 (2005) 235
Raghavendra, B.G., see Nilakantan, K. Ray, A., see Wang, X.
29 (2005) 85 29 (2005) 597
29 (2005) 553 29 (2005) 277
Author Index to Volume 29
Revankar, S.T. and D. Pollock, Laminar film condensation in a vertical tube in the presence of noncondensable gas Richards, P.G., see Zhao, X. Richter, H., E. Barbieri and F. Figueroa, Modelling and validation of a propellant mixer for controller design Roma, A.M., see Enriquez-Remigio, S.A. Roy, D. and M.K. Dash, A novel stochastic locally transversal linearization (LTL) technique for engineering dynamical systems: Strong solutions
1275
29 (2005) 341 29 (2005) 1232 29 (2005) 195 29 (2005) 35 29 (2005) 913
Saadatpour, M.M., see Azhari, M. Salameh, M., Reply to the letter of A. Eroglu Sander, G.C., see Su, N. Satakshi, S. Mukherjee and R.C. Mittal, Order reduction of linear discrete systems using a genetic algorithm Shahidi, A.R., see Azhari, M. Shahmorad, S., see Mohammed Hosseini, S. Shang, Z., CFD of turbulent transport of particles behind a backward-facing step using a new model—k-e-Sp Smolentsev, S. and M. Abdou, Open-surface MHD flow over a curved wall in the 3-D thin-shear-layer approximation Smolianski, A., H. Haario and P. Luukka, Vortex shedding behind a rising bubble and two-bubble coalescence: A numerical approach Su, N., G.C. Sander, F. Liu, V. Anh and D.A. Barry, Similarity solutions for solute transport in fractal porous media using a time- and scale-dependent dispersivity Sun, Y., see Jing, J.P.
29 (2005) 633 29 (2005) 212 29 (2005) 852
Tanajura, C.A.S., see Belyaev, K.P. Tang, W.C. and R.T. Fenner, Analytical integration and exact geometrical representation in the two-dimensional elastostatic boundary element method Tang, Y., T. Fabritius and J. Ha¨rkki, Mathematical modeling of the argon oxygen decarburization converter exhaust gas system at the reduction stage Tanigawa, Y., see Ootao, Y. Teng, B., see Liu, S.-X. Teng, J.-T., L.-Y. Ouyang and C.-T. Chang, Deterministic economic production quantity models with time-varying demand and cost Tory, E.M., see Berres, S. Truscott, S.L. and I.W. Turner, A heterogeneous three-dimensional computational model for wood drying Turner, I.W., see Truscott, S.L. Turner, I.W., see Vegh, V.
29 (2005) 690
29 (2005) 565 29 (2005) 633 29 (2005) 1005 29 (2005) 885 29 (2005) 215 29 (2005) 615 29 (2005) 852 29 (2005) 461
29 (2005) 1073 29 (2005) 497 29 (2005) 321 29 (2005) 1 29 (2005) 987 29 (2005) 159 29 (2005) 381 29 (2005) 381 29 (2005) 411
_ see Burkan, R. Uzmay, I.,
29 (2005) 361
van Vuuren, J.H., see Benecke, S. Vegh, V., I.W. Turner and H. Zhao, Effective cell-centred time-domain Maxwell’s equations numerical solvers
29 (2005) 117 29 (2005) 411
1276
Author Index to Volume 29
´ .J.M. Delhez, A trust-region method applied to parameter Walmag, J.M.B. and E identification of a simple prey–predator model Wang, X., A. Ray and A.M. Khatkhate, On-line identification of language measure parameters for discrete-event supervisory control Wood, A.S., see Mosally, F.
29 (2005) 597 29 (2005) 903
Xia, S.B., see Jing, J.P. Xie, W.P., see Liu, M.B. Xing-Kaeding, Y., see Hadzˇic´, I.
29 (2005) 461 29 (2005) 1252 29 (2005) 1196
Yang, J.P., see Zeng, Y.C. Yang, S.-A. and Y.-T. Lin, Turbulent film condensation on a non-isothermal horizontal tube––effect of eddy diffusivity Yazıcı, A., see Gasimov, R.N. Young, W.-B., Effect of process parameters on injection compression molding of pickup lens Yu, C.W., see Zeng, Y.C. Yu, Y.-X., see Liu, S.-X.
29 (2005) 253
Zeng, Y.C., J.P. Yang and C.W. Yu, Mixed Euler–Lagrange approach to modeling fiber motion in high speed air flow Zhang, S.J., see Zhao, X. Zhao, H., see Vegh, V. Zhao, X., P.G. Richards, S.J. Zhang and J. Liu, High-resolution schemes for bubbling flow computations Zhu, Q.M., An implicit least squares algorithm for nonlinear rational model parameter estimation
29 (2005) 289
29 (2005) 1149 29 (2005) 1135 29 (2005) 955 29 (2005) 253 29 (2005) 1
29 (2005) 253 29 (2005) 1232 29 (2005) 411 29 (2005) 1232 29 (2005) 673