- Email: [email protected]
Contents (prelim iv-v)
Nuclear Engineering and Design 312 (2017) iv–v
Contents lists available at ScienceDirect
Nuclear Engineering and Design journal homepage: www.elsevier.com/locate/nucengdes
CONTENTS Editorial Special issue on the 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics H.C. No and E. Merzari Keynotes On the use of (U)RANS and LES approaches for turbulent incompressible single phase flows in nuclear engineering applications S. Benhamadouche System thermalhydraulics for design basis accident analysis and simulation: Status of tools and methods and direction for future R&D D. Bestion Progress of thermal hydraulic evaluation methods and experimental studies on a sodium-cooled fast reactor and its safety in Japan H. Kamide, H. Ohshima, T. Sakai and M. Tanaka The difference between traditional experiments and CFD validation benchmark experiments B.L. Smith Award winners Experimental and theoretical study of large scale debris bed reflood in the PEARL facility N. Chikhi and F. Fichot Distributed temperature sensor testing in liquid sodium C. Gerardi, N. Bremer, D. Lisowski and S. Lomperski Integrated assessment of thermal hydraulic processes in W7-X fusion experimental facility T. Kaliatka, E. Uspuras and A. Kaliatka Verification, validation and application of NEPTUNE_CFD to two-phase Pressurized Thermal Shocks N. Mérigoux, J. Laviéville, S. Mimouni, M. Guingo, C. Baudry and S. Bellet Large-scale large eddy simulation of nuclear reactor flows: Issues and perspectives E. Merzari, A. Obabko, P. Fischer, N. Halford, J. Walker, A. Siegel and Y. Yu Experimental study of laminar mixed convection in a rod bundle with mixing vane spacer grids L. Mohanta, F.-B. Cheung, S.M. Bajorek, K. Tien and C.L. Hoxie Assessment of wall friction model in multi-dimensional component of MARS with air–water cross flow experiment J.-H. Yang, C.-J. Choi, H.-K. Cho, D.-J. Euh and G.-C. Park Selected papers CFD analysis of pressure drop across grid spacers in rod bundles compared to correlations and heavy liquid metal experimental data A. Batta and A.G. Class Wall-resolved Large Eddy Simulation of a flow through a square-edged orifice in a round pipe at Re = 25,000 S. Benhamadouche, M. Arenas and W.J. Malouf Tracking of fuel particles after pin failure in nominal, loss-of-flow and shutdown conditions in the MYRRHA reactor S. Buckingham, P. Planquart and K. Van Tichelen Use of fundamental condensation heat transfer experiments for the development of a sub-grid liquid jet condensation model F.X. Buschman and D.L. Aumiller Numerical simulations of a mixed momentum-driven and buoyancy-driven jet in a large enclosure for nuclear reactor severe accident analysis L.B. Carasik, F. Sebilleau, S.P. Walker and Y.A. Hassan Experimental evaluation of local bubble parameters of subcooled boiling flow in a pressurized vertical annulus channel I.-C. Chu, S.-J. Lee, Y.J. Youn, J.K. Park, H.S. Choi, D.-J. Euh and C.-H. Song Experimental study of single-phase pressure drops in coarse particle beds R. Clavier, N. Chikhi, F. Fichot and M. Quintard Large eddy simulation of a buoyancy-aided flow in a non-uniform channel – Buoyancy effects on large flow structures Y. Duan and S. He doi:10.1016/S0029-5493(17)30043-2
1
2
12 30 42
48 59 66 74 86 99 106
121 128 137 147
161 172 184 191
Contents / Nuclear Engineering and Design 312 (2017) iv–v
Interface tracking simulations of bubbly flows in PWR relevant geometries J. Fang, M. Rasquin and I.A. Bolotnov Experimental study of laminar and turbulent flame speed of a spherical flame in a fan-stirred closed vessel for hydrogen safety application J. Goulier, N. Chaumeix, F. Halter, N. Meynet and A. Bentaïb Erosion of a confined stratified layer by a vertical jet – Detailed assessment of a CFD approach against the OECD/NEA PSI benchmark S. Kelm, R. Kapulla and H.-J. Allelein Effects of fuel relocation on reflood in a partially-blocked rod bundle B.J. Kim, J. Kim, K. Kim, S.W. Bae and S.-K. Moon Effect of a blockage length on the coolability during reflood in a 2 · 2 rod bundle with a 90% partially blocked region K. Kim, B.-J. Kim, H.-S. Choi, S.-K. Moon and C.-H. Song MyrrhaFoam: A CFD model for the study of the thermal hydraulic behavior of MYRRHA L. Koloszar, S. Buckingham, P. Planquart and S. Keijers Characterization of horizontal air–water two-phase flow R. Kong and S. Kim Unsteady void measurements within debris beds using high speed X-ray tomography E. Laurien, T. Stürzel and M. Zhou A Generalized turbulent dispersion model for bubbly flow numerical simulation in NEPTUNE_CFD J. Laviéville, N. Mérigoux, M. Guingo, C. Baudry and S. Mimouni Assessment of RANS at low Prandtl number and simulation of sodium boiling flows with a CMFD code S. Mimouni, M. Guingo and J. Lavieville Local parameters of air–water two-phase flow at a vertical T-junction G. Monrós-Andreu, R. Martínez-Cuenca, S. Torró and S. Chiva CFD and experimental investigation of sloshing parameters for the safety assessment of HLM reactors K. Myrillas, P. Planquart, A. Simonini, J.-M. Buchlin and M. Schyns Thermal-hydraulic study of the LBE-cooled fuel assembly in the MYRRHA reactor: Experiments and simulations J. Pacio, T. Wetzel, H. Doolaard, F. Roelofs and K. Van Tichelen Validation of ANSYS CFX for gas and liquid metal flows with conjugate heat transfer within the European project THINS A. Papukchiev and S. Buchholz Parametric study on density stratification erosion caused by a horizontal steam jet interacting with a vertical plate obstruction S. Paranjape, R. Kapulla, G. Mignot and D. Paladino High resolution experiments of velocity and concentration fluctuations in a jet flow V. Petrov, D. Nunez, J. Downing, A. Dave and A. Manera Inlet effects on vertical-downward air–water two-phase flow S. Qiao, D. Mena and S. Kim An interfacial shear term evaluation study for adiabatic dispersed air–water two-phase flow with the two-fluid model using CFD S.L. Sharma, T. Hibiki, M. Ishii, J.P. Schlegel, J.R. Buchanan Jr., K.J. Hogan and P.W. Guilbert Turbulence-induced bubble collision force modeling and validation in adiabatic two-phase flow using CFD S.L. Sharma, T. Hibiki, M. Ishii, C.S. Brooks, J.P. Schlegel, Y. Liu and J.R. Buchanan Jr. CFD investigation of nucleate boiling in non-circular geometries at high pressure R. Thakrar, J. Murallidharan and S.P. Walker Experimental observations of boric acid precipitation scenarios R. Vaghetto, M. Childs, P. Jones, S. Lee, E. Kee and Y.A. Hassan Steady and unsteady calculations on thermal striping phenomena in triple-parallel jet Y.Q. Yu, E. Merzari, J.W. Thomas, A. Obabko and S.M. Aithal
v
205
214 228 239 248 256 266 277 284 294 303 317 327 338 351 361 375 389 399 410 422 429
Contents lists available at ScienceDirect
Nuclear Engineering and Design journal homepage: www.elsevier.com/locate/nucengdes
CONTENTS Editorial Special issue on the 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics H.C. No and E. Merzari Keynotes On the use of (U)RANS and LES approaches for turbulent incompressible single phase flows in nuclear engineering applications S. Benhamadouche System thermalhydraulics for design basis accident analysis and simulation: Status of tools and methods and direction for future R&D D. Bestion Progress of thermal hydraulic evaluation methods and experimental studies on a sodium-cooled fast reactor and its safety in Japan H. Kamide, H. Ohshima, T. Sakai and M. Tanaka The difference between traditional experiments and CFD validation benchmark experiments B.L. Smith Award winners Experimental and theoretical study of large scale debris bed reflood in the PEARL facility N. Chikhi and F. Fichot Distributed temperature sensor testing in liquid sodium C. Gerardi, N. Bremer, D. Lisowski and S. Lomperski Integrated assessment of thermal hydraulic processes in W7-X fusion experimental facility T. Kaliatka, E. Uspuras and A. Kaliatka Verification, validation and application of NEPTUNE_CFD to two-phase Pressurized Thermal Shocks N. Mérigoux, J. Laviéville, S. Mimouni, M. Guingo, C. Baudry and S. Bellet Large-scale large eddy simulation of nuclear reactor flows: Issues and perspectives E. Merzari, A. Obabko, P. Fischer, N. Halford, J. Walker, A. Siegel and Y. Yu Experimental study of laminar mixed convection in a rod bundle with mixing vane spacer grids L. Mohanta, F.-B. Cheung, S.M. Bajorek, K. Tien and C.L. Hoxie Assessment of wall friction model in multi-dimensional component of MARS with air–water cross flow experiment J.-H. Yang, C.-J. Choi, H.-K. Cho, D.-J. Euh and G.-C. Park Selected papers CFD analysis of pressure drop across grid spacers in rod bundles compared to correlations and heavy liquid metal experimental data A. Batta and A.G. Class Wall-resolved Large Eddy Simulation of a flow through a square-edged orifice in a round pipe at Re = 25,000 S. Benhamadouche, M. Arenas and W.J. Malouf Tracking of fuel particles after pin failure in nominal, loss-of-flow and shutdown conditions in the MYRRHA reactor S. Buckingham, P. Planquart and K. Van Tichelen Use of fundamental condensation heat transfer experiments for the development of a sub-grid liquid jet condensation model F.X. Buschman and D.L. Aumiller Numerical simulations of a mixed momentum-driven and buoyancy-driven jet in a large enclosure for nuclear reactor severe accident analysis L.B. Carasik, F. Sebilleau, S.P. Walker and Y.A. Hassan Experimental evaluation of local bubble parameters of subcooled boiling flow in a pressurized vertical annulus channel I.-C. Chu, S.-J. Lee, Y.J. Youn, J.K. Park, H.S. Choi, D.-J. Euh and C.-H. Song Experimental study of single-phase pressure drops in coarse particle beds R. Clavier, N. Chikhi, F. Fichot and M. Quintard Large eddy simulation of a buoyancy-aided flow in a non-uniform channel – Buoyancy effects on large flow structures Y. Duan and S. He doi:10.1016/S0029-5493(17)30043-2
1
2
12 30 42
48 59 66 74 86 99 106
121 128 137 147
161 172 184 191
Contents / Nuclear Engineering and Design 312 (2017) iv–v
Interface tracking simulations of bubbly flows in PWR relevant geometries J. Fang, M. Rasquin and I.A. Bolotnov Experimental study of laminar and turbulent flame speed of a spherical flame in a fan-stirred closed vessel for hydrogen safety application J. Goulier, N. Chaumeix, F. Halter, N. Meynet and A. Bentaïb Erosion of a confined stratified layer by a vertical jet – Detailed assessment of a CFD approach against the OECD/NEA PSI benchmark S. Kelm, R. Kapulla and H.-J. Allelein Effects of fuel relocation on reflood in a partially-blocked rod bundle B.J. Kim, J. Kim, K. Kim, S.W. Bae and S.-K. Moon Effect of a blockage length on the coolability during reflood in a 2 · 2 rod bundle with a 90% partially blocked region K. Kim, B.-J. Kim, H.-S. Choi, S.-K. Moon and C.-H. Song MyrrhaFoam: A CFD model for the study of the thermal hydraulic behavior of MYRRHA L. Koloszar, S. Buckingham, P. Planquart and S. Keijers Characterization of horizontal air–water two-phase flow R. Kong and S. Kim Unsteady void measurements within debris beds using high speed X-ray tomography E. Laurien, T. Stürzel and M. Zhou A Generalized turbulent dispersion model for bubbly flow numerical simulation in NEPTUNE_CFD J. Laviéville, N. Mérigoux, M. Guingo, C. Baudry and S. Mimouni Assessment of RANS at low Prandtl number and simulation of sodium boiling flows with a CMFD code S. Mimouni, M. Guingo and J. Lavieville Local parameters of air–water two-phase flow at a vertical T-junction G. Monrós-Andreu, R. Martínez-Cuenca, S. Torró and S. Chiva CFD and experimental investigation of sloshing parameters for the safety assessment of HLM reactors K. Myrillas, P. Planquart, A. Simonini, J.-M. Buchlin and M. Schyns Thermal-hydraulic study of the LBE-cooled fuel assembly in the MYRRHA reactor: Experiments and simulations J. Pacio, T. Wetzel, H. Doolaard, F. Roelofs and K. Van Tichelen Validation of ANSYS CFX for gas and liquid metal flows with conjugate heat transfer within the European project THINS A. Papukchiev and S. Buchholz Parametric study on density stratification erosion caused by a horizontal steam jet interacting with a vertical plate obstruction S. Paranjape, R. Kapulla, G. Mignot and D. Paladino High resolution experiments of velocity and concentration fluctuations in a jet flow V. Petrov, D. Nunez, J. Downing, A. Dave and A. Manera Inlet effects on vertical-downward air–water two-phase flow S. Qiao, D. Mena and S. Kim An interfacial shear term evaluation study for adiabatic dispersed air–water two-phase flow with the two-fluid model using CFD S.L. Sharma, T. Hibiki, M. Ishii, J.P. Schlegel, J.R. Buchanan Jr., K.J. Hogan and P.W. Guilbert Turbulence-induced bubble collision force modeling and validation in adiabatic two-phase flow using CFD S.L. Sharma, T. Hibiki, M. Ishii, C.S. Brooks, J.P. Schlegel, Y. Liu and J.R. Buchanan Jr. CFD investigation of nucleate boiling in non-circular geometries at high pressure R. Thakrar, J. Murallidharan and S.P. Walker Experimental observations of boric acid precipitation scenarios R. Vaghetto, M. Childs, P. Jones, S. Lee, E. Kee and Y.A. Hassan Steady and unsteady calculations on thermal striping phenomena in triple-parallel jet Y.Q. Yu, E. Merzari, J.W. Thomas, A. Obabko and S.M. Aithal
v
205
214 228 239 248 256 266 277 284 294 303 317 327 338 351 361 375 389 399 410 422 429