Corrigendum to “Numerical simulation of flow over topographic features by revised k−ε models” [Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 231–245]

Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 855

Corrigendum

Corrigendum to ‘‘Numerical simulation of flow over topographic features by revised k e models’’ [Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 231–245]$ Yu Fat Luna,*, Akashi Mochidaa, Shuzo Murakamib, Hiroshi Yoshinoa, Taichi Shirasawaa b

a Tohoku University, Aoba 06, Sendai 980-8579, Japan Keio University, 2-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan

Unfortunately Table 3 contained some errors. The correct table is given below. Table 3 Normalized separation point and re-circulation length of the hill cases in comparison with experiment Case

Experiment [9] Standard k e Durbin k e Shih k e

Xs =H (separation)

Xr =H (re-circulation)

Smooth

Rough

Smooth

Rough

1.1 1.3 1.0 1.2

0.6 0.8 0.5 0.5

4.6 3.6 8.5 4.5

6.4 5.4 13.7 6.6

$

PII of original article S0167-6105(02)00348-3 *Corresponding author. E-mail address: [email protected] (Y.F. Lun).

0167-6105/03/$ - see front matter r 2003 Elsevier Science Ltd. All rights reserved. doi:10.1016/S0167-6105(03)00004-7