- Email: [email protected]
Corrigendum to ‘Physical properties and depth of cure of a new short fiber reinforced composite’ [Dent Mater 29 (8) (2013) 835–841]
d e n t a l m a t e r i a l s 3 2 ( 2 0 1 6 ) 1196
Available online at www.sciencedirect.com
ScienceDirect journal homepage: www.intl.elsevierhealth.com/journals/dema
Corrigendum
Corrigendum to ‘Physical properties and depth of cure of a new short fiber reinforced composite’ [Dent Mater 29 (8) (2013) 835–841] Sufyan Garoushi a,b,∗ , Eija Säilynoja c , Pekka K. Vallittu a , Lippo Lassila a a
Department of Biomaterials Science and Turku Clinical Biomaterial Center – TCBC, Institute of Dentistry, University of Turku, Turku, Finland b Department of Restorative Dentistry and Periodontology, Institute of Dentistry, Libyan International Medical University, Benghazi, Libya c Research Development and Production Department, Stick Tech Ltd. – Member of GC Group, Turku, Finland
The authors would like to inform the readers of a needed clarification in this article: There is miscalculation in fracture toughness values presented in article. The corrected values are 0.9 MPa m1/2 for Filtek Bulk Fill, 1.1 MPa m1/2 for Voco X-tra base, 1.2 MPa m1/2 for Venus Bulk Fill, 1.2 MPa m1/2 Tetric EvoCeram Bulk Fill, 1.7 MPa m1/2 for Alert, 1.8 MPa m1/2 for SonicFill, 1.8 MPa m1/2 for SDR and 2.9 MPa m1/2 XENIUS base. This will affect the fracture toughness values presented in abstract (page 835), Figure 1 (page 838) and those presented in results and discussion chapters (pages 838 and 839). The authors would like to apologize for any inconvenience caused.
DOI of original article:http://dx.doi.org/10.1016/j.dental.2013.04.016. Corresponding author at: Department of Biomaterials Science, Institute of Dentistry and TCBC, University of Turku, Turku, Finland. Tel.: +358 2 333 83 57; fax: +358 2 333 83 90. E-mail address: sufgar@utu.fi (S. Garoushi). 0109-5641/$ – see front matter http://dx.doi.org/10.1016/j.dental.2016.07.001 ∗
Available online at www.sciencedirect.com
ScienceDirect journal homepage: www.intl.elsevierhealth.com/journals/dema
Corrigendum
Corrigendum to ‘Physical properties and depth of cure of a new short fiber reinforced composite’ [Dent Mater 29 (8) (2013) 835–841] Sufyan Garoushi a,b,∗ , Eija Säilynoja c , Pekka K. Vallittu a , Lippo Lassila a a
Department of Biomaterials Science and Turku Clinical Biomaterial Center – TCBC, Institute of Dentistry, University of Turku, Turku, Finland b Department of Restorative Dentistry and Periodontology, Institute of Dentistry, Libyan International Medical University, Benghazi, Libya c Research Development and Production Department, Stick Tech Ltd. – Member of GC Group, Turku, Finland
The authors would like to inform the readers of a needed clarification in this article: There is miscalculation in fracture toughness values presented in article. The corrected values are 0.9 MPa m1/2 for Filtek Bulk Fill, 1.1 MPa m1/2 for Voco X-tra base, 1.2 MPa m1/2 for Venus Bulk Fill, 1.2 MPa m1/2 Tetric EvoCeram Bulk Fill, 1.7 MPa m1/2 for Alert, 1.8 MPa m1/2 for SonicFill, 1.8 MPa m1/2 for SDR and 2.9 MPa m1/2 XENIUS base. This will affect the fracture toughness values presented in abstract (page 835), Figure 1 (page 838) and those presented in results and discussion chapters (pages 838 and 839). The authors would like to apologize for any inconvenience caused.
DOI of original article:http://dx.doi.org/10.1016/j.dental.2013.04.016. Corresponding author at: Department of Biomaterials Science, Institute of Dentistry and TCBC, University of Turku, Turku, Finland. Tel.: +358 2 333 83 57; fax: +358 2 333 83 90. E-mail address: sufgar@utu.fi (S. Garoushi). 0109-5641/$ – see front matter http://dx.doi.org/10.1016/j.dental.2016.07.001 ∗