Echo Engineering & Production Supplies, Booth 300

Diversey Lever IndustrialDuBois, Booth 1111 Sharonville, Ohio

Eastman Chemical Booth 1801 Kingport, Tenn.

A complete line of metal cleaners and paint pretreatment chemicals, featuring the new MultiTERJ(TM) line of neutral cleaners and the DuTRAK chemical monitoring system, will be on display. Paint booth maintenance products and systems will be shown as well.

Eastman Chemical Co. will be displaying monomers, including NPG glycol, PIA, 1,4-CHDA, CHDM, and HPHP, used in polyester resins for powder coatings and liquid paint.

Circle 660 on the reader service card

Diversified Finishing Inc., Booth 1153 Grand Prairie, Texas

Equipment

Diversified Finishing Inc. will present the production of liquid spraybooths, dry-off ovens, and conveyor parts washers.

Equipment design and and powder and curing and batch

Circle 661 on the reader service card

DuPont Powder Coatings, Booth 1027 Houston

DuPont will show powder coated products with various glosses, surface effects, and colors.

Co.,

Circle 666 on the reader service card

Echo Engineering & Production Supplies, Booth 300 Milpitas, Calif:

Echo Engineering is offering masking materials for the finishing and electronics industries and their line of colored silicone products. Circle 667 on the reader service card

Eisenmann Corp., Booth 733 Crystal Lake, Ill.

Eisenmann Corp. will show surface finishing systems, material flow automation, environmental technology, and ceramics firing technology.

ultrasonic transducer to predict the final cured thickness of uncured powder coatings, on a range of substrates. Fully portable, this easy-to-use gauge provides accurate and quick measurements, helping to realize significant savings by virtually eliminating rework and drastically reducing raw material costs. Circle 669 on the reader service card

Electra-Steam Generator Booth 1939 Alexandria, Va.

Corp.,

The Electra-Steam Generator Cleaner, a cleaning system that prepares all metals for coatings without flammable fuels, cleans/ prepares metal surfaces at % or less chemical/water expense. Circle 670 on the reader service card

Elektro-Physik USA Inc., Booth 1008 Arlington Heights, Ill.

Circle 668 on the reader service card

Elcometer Inc., Booth 649 Rochester Hills, Mich.

Circle 662 on the reader service card

ECD Inc., Booth 350 Milwaukie, Ore.

ECD will present CureTRAK to get a full-cure and INDATA for W-air velocity and RF real-time data. Circle 663 on the reader service card

EIT Instrument Booth 1101 Sterling, Va.

Markets,

EIT will feature electronic design and manufacturing services. Circle 664 on the reader service card

EM Industries Inc., Booth 135 Hawthorne, N.Y.

EM Industries will display two new effect products: ColorStream Pigments-dynamic color variations based on viewing angle, and Xirallic Pigments-fine particle size with brilliant, sparkling effects. Circle 665 on the reader service card

24

The new Elcometer 550 powder thickness gauge uses a novel, noncontact measurement technique based on a high-frequency

Using ElektroPhysik’s patented F1.6P Powder Probe, the thickness of a powder applied before baking can be measured. With the Powder Probe, one can measure the exact amount of powder applied before baking. Then, simply measuring the same spot after baking will give you the shrinkage factor allowing you to determine the exact amount of powder required to achieve the cured thickness requirement. Circle 671 on the reader service card

Metal Finishing