Acta Materialia 55 (2007) 2563–2564 www.actamat-journals.com
Erratum
Erratum to ‘‘Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis’’ [Acta Mater 55 (2007) 13–28] A. Mishra a, B.K. Kad b, F. Gregori c, M.A. Meyers a
a,*
Department of Mechanical and Aerospace Engineering, Materials Science and Engineering Program, University of California, San Diego, 9500 Gilman Drive, La Jolla, CA 92093-0411, USA b Department of Structural Engineering, University of California, San Diego, La Jolla, CA, USA c Laboratoire des Proprie´te´s Me´caniques et Thermodynamiques des Mate´riaux (CNRS), Universite´ de Paris 13, France Available online 23 February 2007
The publisher regrets that Fig. 8 was printed in black and white, for clarity this figure should have appeared in colour as shown.
*
DOI of original article: 10.1016/j.actamat.2006.07.008. Corresponding author. Tel.: +1 858 534 4719; fax: +1 858 534 5698. E-mail address:
[email protected] (M.A. Meyers).
1359-6454/$30.00 Ó 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. doi:10.1016/j.actamat.2007.01.002
2564
Erratum / Acta Materialia 55 (2007) 2563–2564
Fig. 8. EBSD pattern and misorientation angle distribution of ECAP Cu samples after 8 passes using three different routes; (a) route A, (b) route C, and (c) route BC.