- Email: [email protected]
Index, volume 21, 1997
INDEX, VOLUME 21,1997 AUTHOR/ TITLE INDEX Abboud, N. E. and Sfairy, R. G.: Time-limited free back-orders EOQ model, 21 Abdel-Hamid, B. A.: Transient temperature distribution of periodic heat diffusion in a flat plate crossed by an alternating electric current, 387 Adair, D. and Tucker, P. G.: Efficient modelling of rotating disks and cylinders using a cartesian grid, 749 Al-Fuhaid, A. S., El-Sayed, M. A. and Mahmoud, M. S.: Neuro-short-term load forecast of the power system in Kuwait, 215 Aliabadi, M. H.: See Rashed, Y. F., 155 Andrews, M.: See Ilegbusi, 0. J., 66 Arakeri, J. H.: See Dewan, A., 709 Argain, J.: See Coelho, P. J., 427
Balasubramanian, V., Jayaraman, G. and Iyengar, S. R. K.: Effect of secondary flows on contaminant dispersion with weak boundary absorption, 275 Barry, S. I., Mercer, G. N. and Zoppou, C.: Deformation and fluid flow due to a source in a poro-elastic layer, 681 Baylis, D. J.: See Bland, J. A., 667 Beale, D. G., Marghitu, D. B., and Lee, S.-W.: Modelling and resonance of a flexible rod using a floating reference frame, 793 Bercin, A. N.: See Tanaka, M., 339 Bishop, S. R.: See de Souza, J. R., 108 Bland, J. A. and Baylis, D. J.: Modelling constant weight codes using tabu search, 667 Bokhari, H. M.: SeeBunday, B. D., 42 Bonney, M.: See Jaber, M. Y., 523 Boulos, P. F.: See Hannoun, 1. A., 495 Boysal, A. and Rahnejat, H.: Torsional vibration analysis of a multi-body single cylinder internal combustion engine model, 481 Brebbia, C. A.: See Rashed, Y. F., 155 Brennan, T. J.: See Mokhtarzadeh-Dehghan, M. R., 437 Bunday, B. D., Bokhari, H. M. and Khorram, E.: The efficiency of two groups of heterogeneous stations cared for by r operatives with a priority group, 42
Campbell, J.: See Zhu, X. R., 207 Carter, G. S. and Shankar, U.: Creating rectangular bathymetry grids for environmental numerical modelling of gravel-bed rivers, 699 Cassidy, T.: See Grishanov, S. A., 455 Chakraverty, S. and Petyt, M.: Natural frequencies for free vibration of nonhomoge-
neous elliptic and circular plates using hvodimensional orthogonal polynomials, 399 Chamkha, A. J.: MHD-free convection from a vertical plate embedded in a thermally stratified porous medium with Hall effects, 603 Chamkha, A. J.: Unsteady flow of an electrically conducting dusty-gas in a channel due to an oscillating pressure gradient, 287 Chang, W.-J. and Weng, C.-I: An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture, 721 Chen, C.-K.: See Tien, T.-L., 611 Chen, C.-K.: See Yang, Y.-T., 139 Chen, G.: See Feng, F., 233 Coelho, P. J. and Argain, J.: A local grid refinement technique based upon Richardson extrapolation, 427 de Souza, J. R. and Bishop, S. R.: Boundaries of safe operation of mechanical oscillators, 108 Dantzig, J. A.: See Ebrahimi, S. A., 113 Davey, K.: See Milroy, J., 763 Demiray, Hilmi: Effect of initial twist on wave characteristics in a prestressed fluid-filled elastic thin tube, 181 Dewan, A., Arakeri, J. H. and Srinivasan, J.: A new turbulence model for the axisymmetric plume, 709 Dimitrieva, N. A.: See Terentiev, A. G., 91 Duckstein, L.: See ozelkan, E. C., 591
Ebrahimi, M.: See Whalley, R., 261 Ebrahimi, S. A., Tortorelli, D.A. and Dantzig, J. A.: Sensitivity analysis and nonlinear programming applied to investment casting design, 113 El-Sayed, M. A.: See Al-Fuhaid, A. S., 215 Elnagar, G. N. and Razzaghi, M.: A Chebyshev spectral method for the solution of nonlinear optimal control problems, 255
Feng, F., Shieh, L.-S. and Chen, G.: Model conversions of uncertain linear systems using interval multipoint Pade approximation, 233 Fernlndez-Gaucherand, E.: See &elkan, E. c., 591 Fielding, L. M., Villaqa, S. F. and Garcia, L. F. T.: Energetic finite differences with arbitrary meshes applied to plate-bending problems, 691 Fraser, S. M.: See Sarkar, T., 783
Appl. Math. Modelling 1997, Vol. 21, December 0 1997 by Elsevier Science Inc. 655 Avenue of the Americas, New York, NY 10010
Galambosi, A.: See Ozelkan, E. C., 591 Galloway, S. J. and Smyth, N. F.: A numerical method for predicting crystal micro-structure, 569 Garcia, L. F. T.: See Fielding, L. M., 691 Garcia-Sanz, M.: A reduced model of central heating systems as a realistic scenario for analyzing control strategies, 535 Grishanov, S. A., Cassidy, T. and Spencer, D. J.: A model of the loop formation process on knitting machines using finite automata theory, 455 Hannoun, I. A. and Boulos, P. F.: Optimizing distribution storage water quality: A hydrodynamic approach, 495 Haque, A. F. M. A.: See Sarker, R. A., 621 Harding, R. A.: See Zhu, X. R., 207 Hasan, M.: See Meidani, A. R. Naji, 127 Haskew, J. T. and Sharif, M. A. R.: Performance evaluation of vaned pipe bends in turbulent flow of liquid propellants, 48 Heemink, A. W.: See Zhang, X. F., 2 Hein, S.: TLM numerical solution of Bloch’s equations for magnetized gyrotropic media, 221 Hess, D. P.: See Rashquinha, I. A., 801 Hinduja, S.: See Milroy, J., 763 Hocking, G. C. and Vanden-Broeck, J.-M.: Draining of a fluid of finite depth into a vertical slot, 643 Hryniewicz, Z.: On the range of applicability of Bourret approximation, 247 Hsu, P.-T.: See Yang, Y.-T., 139 Ilegbusi, 0. J., Mat, M. and Andrews, M.: The deformation and kinematic mixing of a collapsing interface, 66 Iyengar, S. R. K.: See Balasubramanian, V., 275 Jaber, M. Y. and Bonney, M.: A comparative study of learning curves with forgetting, 523 Jaber, M. Y.: See Salameh, M. K., 85 Jayaraman, G.: See Balasubramanian, V., 275 Khorram, E.: See Bunday, B. D., 42 Kukreti, A. R. and Siddiqi, Z. A.: Analysis of fluid storage tanks including foundationsuperstructure interaction using differential quadrature method, 193 Kumar, P.: See Sharan, M., 419 Ladommatos, N.: See Mokhtarzadeh-Dehghan, M. R., 437 Lee, S.-W.: See Beale, D. G., 793
0307-904x/ 97/$17.00 PI1 SO307-904X(98)01002-6
Index, Volume 21, 1997 Liao, C-M. and Lin, W.-Z.: An optimal feedback control strategy for waste disposal management in agroecosystems, 165 Lin, W.-Z.: See Liao, C.-M., 165 Luong, P.: See Ly, L. N., 633 Ly, L. N. and Luong, P.: A mathematical coastal ocean circulation system with breaking waves and numerical grid generation, 633 Madhav, M. T. and Malin, M. R.: The numerical simulation of fully developed duct flows, 503 Mahmoud, M.: See Al-Fuhaid, A. S., 215 Mai, L.: See Zhaoyi, L., 15 Majee, N. C. and Roy, A. B.: Temporal dynamics of a two-neuron continuous network model with time delay, 673 Malin, M. R.: See Madhav, M. T., 503 Malmborg, C. J.: Expected part delays as a secondary layout criterion in automated manufacturing systems, 301 Marghitu, D. B.: See Beale, D. G., 793 Mat, M.: See Ilegbusi, 0. J., 66 McKenzie, S.: Performance analysis of a register insertion ring with a variable size buffer, 293 Meidani, A. R. Naji and Hasan, M.: A numerical study of the complex dynamic behavior of a reactive gas bubble in water, 127 Mercer, G. N.; See Barry, S. I., 681 Milroy, J., Hinduja, S. and Davey, K.: The elastostatic three-dimensional boundary element method: analytical integration for linear isoparametric triangular elements, 763 Mitchell, D.: See Whalley, R., 261 Mohamed, M. G.: Kinematics of rigid bodies in general spatial motion: second-order motion properties, 471 Mokhtarzadeh-Dehghan, M. R., Ladommatos, N. and Brennan, T. J.: Finite element analysis of flow in a hydraulic pressure valve, 437 Nappi, A.: See Papa, E., 319 Ogurtani, T. 0.: Mathematical modelling of decoration peak associated with dragging point defects situated selectively at the kink chain with special references to hydrogenated BCC and FCC metals, 26 Ohnaka, K.: See Yamatani, K., 77 Qzelkan, E. C., Galambosi, A., FernandezGaucherand, E. and Duckstein, L.: Linear quadratic dynamic programming for water reservoir management, 591 Pan, E.: Static Green’s functions in multilayered half spaces, 509 Papa, E. and Nappi, A.: Numerical modelling of masonry: A material model accounting for damage effects and plastic strains, 319 Petyt, M.: See Chakraverty, S., 399 Qin, Q. H.: Postbuckling analysis of thin plates on an elastic foundation by HT FE approach, 547
812
Appl. Math.
Modelling,
1997,
Rahnejat, H.: See Boysal, A., 481 Ramos, J. I.: Lumped models of gas bubbles in thermal gradients, 371 Ramos, J. I.: Mass transfer in annular liquid jets in the presence of liquid flow rate fluctuations, 363 Ramos, J. I.: Short Note: A nonstandard finite difference method for the one-dimensional advection equation in cylindrical-polar coordinates, 337 Rashed, Y. F., Aliabadi, M. H. and Brebbia, C. A.: On the evaluation of the stresses in the BEM for Reissner plate-bending problems, 155 Rashquinha, I. A. and Hess, D. P.: Modelling nonlinear dynamics of bolted assemblies, 801 Razzaghi, M.: See Elnagar, G. N., 255 Rees, D. W. A.: A tensor function for the Rvalue of sheet metal, 579 Roy, A. B.: See Majee, N. C., 673 Russell, D. L. and White, L. W.: On the development of a static formation theory for active materials, 345 Salameh, M. K., and Jaber, M. Y.: Optimal lot sizing with regular maintenance interruptions, 85 Saldanha da Gama, R. M.: A linear scheme for simulating conduction heat transfer problems with nonlinear boundary conditions, 447 Sarkar, T., Sayer, P. G. and Fraser, S. M.: Flow simulation past axisymmetric bodies using four different turbulence models, 783 Sarker, R. A., Talukdar, S. and Haque, A. F. M. A.: Determination of optimum crop mix for crop cultivation in Bangladesh, 621 Sayer, P. G.: See Sarkar, T., 783 Sfairy, R. G.: See Abboud, N. E., 21 Shankar, U.: See Carter, G. S., 699 Sharan, M., Singh, 8. and Kumar, P.: A twolayer model for studying the effect of plasma layer on the delivery of oxygen to tissue using a finite element method, 419 Sharif, M. A. R.: See Haskew, J. T., 48 Shariff, M. H. B. M.: An extension of Herrmann’s principle to nonlinear elasticity, 97 Shieh, L.-S.: See Feng, F., 233 Shoukralla, E. S.: Numerical solution of Helmholtz equation for an open boundary in space, 231 Siddiqi, Z. A.: See Kukreti, A. R., 193 Singh, B.: See Sharan, M., 419 Smaoui, N.: Artificial neural network-based low-dimensional model for spatio-temporally varying cellular flames, 739 Smyth, N. F.: See Galloway, S. J., 569 Spencer, D. J.: See Grishanov, S. A., 455 Srinivasan, J.: See Dewan, A., 709 Talukdar, S.: See Sarker, R. A., 621 Tanaka, M. and Bercin, A. N.: Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section, 339 Terentiev, A. G., Zhitnikov, V. P. and Dimitrieva, N. A.: An application of analytic
Vol. 21, December
functions to axisymmetric flow problems, 91 Tien, T.-L. and Chen, C.-K.: The indirect measurement of fatigue limits of structural steel by the deterministic grey dynamic model DGDM(l,l,l), 611 Tortorelli, D. A.: See Ebrahimi, S. A., 113 Tucker, P. G.: See Adair, D., 749 van Eijkeren, J. C. H.: See Zhang, X. F., 2 Van, A. Le: Boundary integro-differential equation for anisotropic bodies with initial strains or stresses, 145 Vanden-Broeck, J.-M.: See Hocking, G. C., 643 Villaca, S. F.: See Fielding, L. M., 691 Weng, C.-I: See Chang, W.-J., 721 Whalley, R., Ebrahimi, M. and Mitchell, D.: Structural properties of the matrix quadratic and its inverse, 261 White, L. W.: See Russell, D. L., 345 Winkler, J. R.: Polynomial basis conversion made stable by truncated singular value decomposition, 557 Winkler, J. R.: Tikhonov regularisation in standard form for polynomial basis conversion, 651 Xiaoming,
L.: See Zhaoyi, L., 15
Yamatani, K. and Ohnaka, K.: An estimation method for point sources of multidimensional diffusion equation, 77 Yang, Y.-T., Chen, C.-K. and Hsu, P.-T.: Laminar film condensation on a finite-size horizontal wavy disk, 139 Yongyi, C.: See Zhaoyi, L., 15 Zhang, X. F., Heemink, A. W. and van Eijkeren, J. C. H.: Data assimilation in transport models, 2 Zhaoyi, L., Mai, L. , Yongyi, C. and Xiaoming, L.: A special random selective service queueing model for access to a star LAN, 15 Zhitnikov, V. P.: See Terentiev, A. G., 91 Zhu, X. R., Harding, R. A. and Campbell, J.: Calculation of the free surface shape in the electromagnetic processing of liquid metals, 207 Zoppou, C.: See Barry, S. I., 681
KEYWORD INDEX AGO, 611 Acceleration center, 471 Acceleration, 471 Acceleration-axes, 471 Access mode, 15 Agroecosystem, 165 Algebraic stress model, 709 Analytical techniques, 721 Anisotropy, 145 Annular liquid jets, 363 Arbitrary cross-section beams, 339 Arbitrary meshes, 691 Artificial neural networks, 215
Index, Volume 2 1, 1997 Artificial neural networks, 739 Assemblies, 801 Asymptotic stability, 673 Automated guided vehicle, 301 Axisymmetric flows, 91 Axisymmetty, 783 B-spline curve, 557 B-splines, 651 Backorders, 21 Bathymetty grids, 699 Bernstein basis, 557 Bezier curve, 557 Bifurcations, 673 Bloch’s equations, 221 Bolts, 801 Boundary absorption, 275 Boundary elements, 763 Boundary integral equation, Bubble dynamics, 127 Bubble ignition, 127 Bubble oscillations, 127 Bubbles, 91 Buoyancy driven flow, 66 Buoyancy, 371 Buoyancy, 709
77
CFD, 503 Calculations, 207 Cartesian grid, 749 Cavitation, 91 Cellular flames, 739 Chebyshev polynomial, 749 Chebyshev, 255 Circulation modelling, 633 Coastal ocean modelling, 633 Coastal ocean system, 633 Cold rolling, 579 Computational fluid dynamics, 495 Computer modelling, 633 Computer simulation, 26 Computer simulation, 419 Computer-aided design, 557 Computer-aided design, 651 Conduction heat transfer, 447 Constant weight code, 667 Coupled bending and torsion, 339 Coupled heat and moisture, 721 Crop planning, 621 Curved tube, 275
Engine dynamics, 481 Entrainment, 709 Escape phenomena, 108
Jets, 643
Facility layout, 301 Fatigue limit, 611 Film condensation, 139 Filter, 681 Finite automaton, 455 Finite difference energy, 691 Finite difference method, 48 Finite difference, 221 Finite element analysis, 113 Finite element method, 339 Finite element method, 419 Finite element, 207 Finite element, 97 Finite elements, 319 Finite integral transform, 387 Flexible rod, 793 Floating reference frame, 793 Flow in pipe-bends, 48 Flow, 437 Flow-rate fluctuations, 363 Forgetting, 523 Formability, 579 Formation theory, 345 Free convection, 603 Free surface shape, 207 Free vibration, 339 Free-surface flow, 643 Fully-developed internal flows, 503 Gas bubbles, 371 General spatial motion, 471 Generalized analytic functions, Generalized methods, 387 Genetic algorithm, 301 Gravel-bed rivers, 699 Green’s function, 509 Grey system, 611 Grid embedding, 427 HVAC simulation, 535 Hardening exponent, 579 Heating systems modelling, 535 Heterogeneous stations, 42 Hydraulic, 437 Hygrothermoelasticity, 721 k - E model, 709
Damage, 319 Data assimilation, 2 Deformable, 681 Digital modeling, 233 Dislocation damping, 26 Dispersion, 275 Distribution storage, 495 Dynamical systems, 739 Dynamics, 801 Elastic foundation, 547 Elastic tube, 181 Elastostatics, 763 Electromagnetic field, 207 Elliptic, 399 Engine NVH, 481
Incompressible, 97 Indirect measurement, 611 Initial strain, 145 Initial stress, 145 Initial stress, 181 Integral equation, 145 Integral method, 139 Integration, 763 Intermittency, 709 Internal friction, 26 Interval system, 233 Inventory theory, 21 Inverse source problem, 77 Investment casting, 113 Inviscid incompressible fluid, 91
91
Kalman filtering, 2 Karhunen-Lo&e decompositions, Kinematics, 471 Knitted structure, 455 Knitting machine, 455 Kriging, 2 Kriging, 699
739
Laminar boundary layers, 749 Learning, 523 Linear procedure, 447 Linear programming, 621 Linear quadratic tracking, 591 Load forecast, 215 Local grid refinement, 427 Loosening, 801 Lost sales, 21 Lot sizing, 85 Low-Reynolds number, 783 MHD channel flow, 287 MHD flow, 603 Machine interference, 42 Maintenance and resetting cost, 85 Maintenance interruptions, 85 Malfunction, 455 Masonry, 319 Mass transfer, 363 Mass transfer, 371 Materials handling, 301 Mathematical model, 419 Mathematical modeling, 48 Mathematical modelling, 633 Matrix, 261 Minimum break, 523 Mixing, 66 Modelling, 437 Modelling, 801 Monodromy matrix, 793 Moving boundary, 127 Multi-body system simulation, 481 Multidimensional diffusion equation, Multilayered half space, 509
77
Near-wall conditions, 783 Needle damage, 455 Neural network, 673 Nonhomogeneous, 399 Nonlinear boundary conditions, 447 Nonlinear dynamics, 108 Nonlinear elasticity, 97 Nonlinear oscillators, 108 Nonlinear problems, 255 Numerical analysis, 91 Numerical grid generation, 633 Numerical methods, 503 Numerical modeling, 699 Numerical modelling, 691 Numerical simulation, 447 Numerical, 437 Optimal control theory, 345 Optimal design, 345 Optimal feedback control, 165 Optimisation, 667 Optimization, 21
Appl. Math. Modelling,
1997, Vol. 21, December
813
Index, Volume 21, 1997 Optimum crop mix, 621 Orthogonal-polynomials, 399 Oscillating pressure gradient, 287 Oxygen transport, 419
Reservoir management, 591 Richardson extrapolation, 427 Rolling direction, 579 Rotating flows, 749
Pade approximation, 233 Parallel, 261 Parameter identification, 345 Parametric resonance instability, 793 Performance, 293 Periodic heating, 387 Perturbation method, 275 Perturbative methods, 221 Phoenics, 783 Plastic prestrain, 579 Plasticity, 319 Plate bending, 691 Plate, 399 Plate, 547 Point source, 77 Polynomial basis conversion, 651 Poro-elastic, 681 Porous media, 603 Porous, 681 Postbuckling analysis, 547 Potential wells, 108 Power basis, 557 Power systems, 215 Preventive maintenance, 85
Sampled-data system, 233 Second-order motion properties, 471 Secondary flows, 275 Selective withdrawal, 643 Sensitivity analysis, 113 Series, 261 Sheet metals, 579 Simulation, 293 Simulation, 783 Singular value decomposition, 557 Slider-crank mechanism, 793 Slightly compressible, 97 Snoek-Koster peaks, 26 Spectral method, 255 Spectral method, 275 Stability switches, 673 Star LAN, 15 Starvation, 293 State space, 261 Stochastic dynamic programming, 591 Stochastic systems, 247 Stochastic waves, 247 Strain history, 579 Stress and strain transformations, 579 Structural dynamics, 319 Structures, 261 Surface-breaking waves, 633 Systemic capillaries, 419
Quadratic,
261
R-value (width/thickness strain ratio), r operatives, 42 Random oscillator, 247 Random selective service, 15 Rayleigh-Taylor instability, 66 Reactive bubble, 127 Register insertion, 293
814
,579
Appl. Math. Modelling,
TLM modelling, 221 Tabu search, 667 Technical coefficient, 165 Tensile test, 579 Tensor function, 579
1997, Vol. 21, December
Tensor functions, 579 Test-bed for controllers, 535 Thermal gradients, 371 Thermal stratification, 603 Thermocapillary, 371 Threaded fasteners, 801 Tikhonov regularisation, 651 Tissue PO*, 419 Transfer function, 611 Transient heat conduction, 387 Transport models, 2 Transverse isotropy, 509 Trefftz finite element, 547 Triangulation, 699 Turbulence, 783 Turbulent flow, 48 Two-fluids model, 66 Two-phase flow, 287 Two-phase flow, 419 Uncertain system, 233 Underwater vehicle, 783 Unsteady flow, 287 Valve, 437 Vehicle scheduling, 301 Vibration, 399 Viscous fluid, 181 Volume distance. 301 Waste disposal, 165 Water networks, 495 Water quality, 495 Waterfalls, 643 Wave propagation, 181 Wavy disk, 139 Weighted residual approach, Yield function,
579
77
Balasubramanian, V., Jayaraman, G. and Iyengar, S. R. K.: Effect of secondary flows on contaminant dispersion with weak boundary absorption, 275 Barry, S. I., Mercer, G. N. and Zoppou, C.: Deformation and fluid flow due to a source in a poro-elastic layer, 681 Baylis, D. J.: See Bland, J. A., 667 Beale, D. G., Marghitu, D. B., and Lee, S.-W.: Modelling and resonance of a flexible rod using a floating reference frame, 793 Bercin, A. N.: See Tanaka, M., 339 Bishop, S. R.: See de Souza, J. R., 108 Bland, J. A. and Baylis, D. J.: Modelling constant weight codes using tabu search, 667 Bokhari, H. M.: SeeBunday, B. D., 42 Bonney, M.: See Jaber, M. Y., 523 Boulos, P. F.: See Hannoun, 1. A., 495 Boysal, A. and Rahnejat, H.: Torsional vibration analysis of a multi-body single cylinder internal combustion engine model, 481 Brebbia, C. A.: See Rashed, Y. F., 155 Brennan, T. J.: See Mokhtarzadeh-Dehghan, M. R., 437 Bunday, B. D., Bokhari, H. M. and Khorram, E.: The efficiency of two groups of heterogeneous stations cared for by r operatives with a priority group, 42
Campbell, J.: See Zhu, X. R., 207 Carter, G. S. and Shankar, U.: Creating rectangular bathymetry grids for environmental numerical modelling of gravel-bed rivers, 699 Cassidy, T.: See Grishanov, S. A., 455 Chakraverty, S. and Petyt, M.: Natural frequencies for free vibration of nonhomoge-
neous elliptic and circular plates using hvodimensional orthogonal polynomials, 399 Chamkha, A. J.: MHD-free convection from a vertical plate embedded in a thermally stratified porous medium with Hall effects, 603 Chamkha, A. J.: Unsteady flow of an electrically conducting dusty-gas in a channel due to an oscillating pressure gradient, 287 Chang, W.-J. and Weng, C.-I: An analytical solution of a transient hygrothermal problem in an axisymmetric double-layer annular cylinder by linear theory of coupled heat and moisture, 721 Chen, C.-K.: See Tien, T.-L., 611 Chen, C.-K.: See Yang, Y.-T., 139 Chen, G.: See Feng, F., 233 Coelho, P. J. and Argain, J.: A local grid refinement technique based upon Richardson extrapolation, 427 de Souza, J. R. and Bishop, S. R.: Boundaries of safe operation of mechanical oscillators, 108 Dantzig, J. A.: See Ebrahimi, S. A., 113 Davey, K.: See Milroy, J., 763 Demiray, Hilmi: Effect of initial twist on wave characteristics in a prestressed fluid-filled elastic thin tube, 181 Dewan, A., Arakeri, J. H. and Srinivasan, J.: A new turbulence model for the axisymmetric plume, 709 Dimitrieva, N. A.: See Terentiev, A. G., 91 Duckstein, L.: See ozelkan, E. C., 591
Ebrahimi, M.: See Whalley, R., 261 Ebrahimi, S. A., Tortorelli, D.A. and Dantzig, J. A.: Sensitivity analysis and nonlinear programming applied to investment casting design, 113 El-Sayed, M. A.: See Al-Fuhaid, A. S., 215 Elnagar, G. N. and Razzaghi, M.: A Chebyshev spectral method for the solution of nonlinear optimal control problems, 255
Feng, F., Shieh, L.-S. and Chen, G.: Model conversions of uncertain linear systems using interval multipoint Pade approximation, 233 Fernlndez-Gaucherand, E.: See &elkan, E. c., 591 Fielding, L. M., Villaqa, S. F. and Garcia, L. F. T.: Energetic finite differences with arbitrary meshes applied to plate-bending problems, 691 Fraser, S. M.: See Sarkar, T., 783
Appl. Math. Modelling 1997, Vol. 21, December 0 1997 by Elsevier Science Inc. 655 Avenue of the Americas, New York, NY 10010
Galambosi, A.: See Ozelkan, E. C., 591 Galloway, S. J. and Smyth, N. F.: A numerical method for predicting crystal micro-structure, 569 Garcia, L. F. T.: See Fielding, L. M., 691 Garcia-Sanz, M.: A reduced model of central heating systems as a realistic scenario for analyzing control strategies, 535 Grishanov, S. A., Cassidy, T. and Spencer, D. J.: A model of the loop formation process on knitting machines using finite automata theory, 455 Hannoun, I. A. and Boulos, P. F.: Optimizing distribution storage water quality: A hydrodynamic approach, 495 Haque, A. F. M. A.: See Sarker, R. A., 621 Harding, R. A.: See Zhu, X. R., 207 Hasan, M.: See Meidani, A. R. Naji, 127 Haskew, J. T. and Sharif, M. A. R.: Performance evaluation of vaned pipe bends in turbulent flow of liquid propellants, 48 Heemink, A. W.: See Zhang, X. F., 2 Hein, S.: TLM numerical solution of Bloch’s equations for magnetized gyrotropic media, 221 Hess, D. P.: See Rashquinha, I. A., 801 Hinduja, S.: See Milroy, J., 763 Hocking, G. C. and Vanden-Broeck, J.-M.: Draining of a fluid of finite depth into a vertical slot, 643 Hryniewicz, Z.: On the range of applicability of Bourret approximation, 247 Hsu, P.-T.: See Yang, Y.-T., 139 Ilegbusi, 0. J., Mat, M. and Andrews, M.: The deformation and kinematic mixing of a collapsing interface, 66 Iyengar, S. R. K.: See Balasubramanian, V., 275 Jaber, M. Y. and Bonney, M.: A comparative study of learning curves with forgetting, 523 Jaber, M. Y.: See Salameh, M. K., 85 Jayaraman, G.: See Balasubramanian, V., 275 Khorram, E.: See Bunday, B. D., 42 Kukreti, A. R. and Siddiqi, Z. A.: Analysis of fluid storage tanks including foundationsuperstructure interaction using differential quadrature method, 193 Kumar, P.: See Sharan, M., 419 Ladommatos, N.: See Mokhtarzadeh-Dehghan, M. R., 437 Lee, S.-W.: See Beale, D. G., 793
0307-904x/ 97/$17.00 PI1 SO307-904X(98)01002-6
Index, Volume 21, 1997 Liao, C-M. and Lin, W.-Z.: An optimal feedback control strategy for waste disposal management in agroecosystems, 165 Lin, W.-Z.: See Liao, C.-M., 165 Luong, P.: See Ly, L. N., 633 Ly, L. N. and Luong, P.: A mathematical coastal ocean circulation system with breaking waves and numerical grid generation, 633 Madhav, M. T. and Malin, M. R.: The numerical simulation of fully developed duct flows, 503 Mahmoud, M.: See Al-Fuhaid, A. S., 215 Mai, L.: See Zhaoyi, L., 15 Majee, N. C. and Roy, A. B.: Temporal dynamics of a two-neuron continuous network model with time delay, 673 Malin, M. R.: See Madhav, M. T., 503 Malmborg, C. J.: Expected part delays as a secondary layout criterion in automated manufacturing systems, 301 Marghitu, D. B.: See Beale, D. G., 793 Mat, M.: See Ilegbusi, 0. J., 66 McKenzie, S.: Performance analysis of a register insertion ring with a variable size buffer, 293 Meidani, A. R. Naji and Hasan, M.: A numerical study of the complex dynamic behavior of a reactive gas bubble in water, 127 Mercer, G. N.; See Barry, S. I., 681 Milroy, J., Hinduja, S. and Davey, K.: The elastostatic three-dimensional boundary element method: analytical integration for linear isoparametric triangular elements, 763 Mitchell, D.: See Whalley, R., 261 Mohamed, M. G.: Kinematics of rigid bodies in general spatial motion: second-order motion properties, 471 Mokhtarzadeh-Dehghan, M. R., Ladommatos, N. and Brennan, T. J.: Finite element analysis of flow in a hydraulic pressure valve, 437 Nappi, A.: See Papa, E., 319 Ogurtani, T. 0.: Mathematical modelling of decoration peak associated with dragging point defects situated selectively at the kink chain with special references to hydrogenated BCC and FCC metals, 26 Ohnaka, K.: See Yamatani, K., 77 Qzelkan, E. C., Galambosi, A., FernandezGaucherand, E. and Duckstein, L.: Linear quadratic dynamic programming for water reservoir management, 591 Pan, E.: Static Green’s functions in multilayered half spaces, 509 Papa, E. and Nappi, A.: Numerical modelling of masonry: A material model accounting for damage effects and plastic strains, 319 Petyt, M.: See Chakraverty, S., 399 Qin, Q. H.: Postbuckling analysis of thin plates on an elastic foundation by HT FE approach, 547
812
Appl. Math.
Modelling,
1997,
Rahnejat, H.: See Boysal, A., 481 Ramos, J. I.: Lumped models of gas bubbles in thermal gradients, 371 Ramos, J. I.: Mass transfer in annular liquid jets in the presence of liquid flow rate fluctuations, 363 Ramos, J. I.: Short Note: A nonstandard finite difference method for the one-dimensional advection equation in cylindrical-polar coordinates, 337 Rashed, Y. F., Aliabadi, M. H. and Brebbia, C. A.: On the evaluation of the stresses in the BEM for Reissner plate-bending problems, 155 Rashquinha, I. A. and Hess, D. P.: Modelling nonlinear dynamics of bolted assemblies, 801 Razzaghi, M.: See Elnagar, G. N., 255 Rees, D. W. A.: A tensor function for the Rvalue of sheet metal, 579 Roy, A. B.: See Majee, N. C., 673 Russell, D. L. and White, L. W.: On the development of a static formation theory for active materials, 345 Salameh, M. K., and Jaber, M. Y.: Optimal lot sizing with regular maintenance interruptions, 85 Saldanha da Gama, R. M.: A linear scheme for simulating conduction heat transfer problems with nonlinear boundary conditions, 447 Sarkar, T., Sayer, P. G. and Fraser, S. M.: Flow simulation past axisymmetric bodies using four different turbulence models, 783 Sarker, R. A., Talukdar, S. and Haque, A. F. M. A.: Determination of optimum crop mix for crop cultivation in Bangladesh, 621 Sayer, P. G.: See Sarkar, T., 783 Sfairy, R. G.: See Abboud, N. E., 21 Shankar, U.: See Carter, G. S., 699 Sharan, M., Singh, 8. and Kumar, P.: A twolayer model for studying the effect of plasma layer on the delivery of oxygen to tissue using a finite element method, 419 Sharif, M. A. R.: See Haskew, J. T., 48 Shariff, M. H. B. M.: An extension of Herrmann’s principle to nonlinear elasticity, 97 Shieh, L.-S.: See Feng, F., 233 Shoukralla, E. S.: Numerical solution of Helmholtz equation for an open boundary in space, 231 Siddiqi, Z. A.: See Kukreti, A. R., 193 Singh, B.: See Sharan, M., 419 Smaoui, N.: Artificial neural network-based low-dimensional model for spatio-temporally varying cellular flames, 739 Smyth, N. F.: See Galloway, S. J., 569 Spencer, D. J.: See Grishanov, S. A., 455 Srinivasan, J.: See Dewan, A., 709 Talukdar, S.: See Sarker, R. A., 621 Tanaka, M. and Bercin, A. N.: Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section, 339 Terentiev, A. G., Zhitnikov, V. P. and Dimitrieva, N. A.: An application of analytic
Vol. 21, December
functions to axisymmetric flow problems, 91 Tien, T.-L. and Chen, C.-K.: The indirect measurement of fatigue limits of structural steel by the deterministic grey dynamic model DGDM(l,l,l), 611 Tortorelli, D. A.: See Ebrahimi, S. A., 113 Tucker, P. G.: See Adair, D., 749 van Eijkeren, J. C. H.: See Zhang, X. F., 2 Van, A. Le: Boundary integro-differential equation for anisotropic bodies with initial strains or stresses, 145 Vanden-Broeck, J.-M.: See Hocking, G. C., 643 Villaca, S. F.: See Fielding, L. M., 691 Weng, C.-I: See Chang, W.-J., 721 Whalley, R., Ebrahimi, M. and Mitchell, D.: Structural properties of the matrix quadratic and its inverse, 261 White, L. W.: See Russell, D. L., 345 Winkler, J. R.: Polynomial basis conversion made stable by truncated singular value decomposition, 557 Winkler, J. R.: Tikhonov regularisation in standard form for polynomial basis conversion, 651 Xiaoming,
L.: See Zhaoyi, L., 15
Yamatani, K. and Ohnaka, K.: An estimation method for point sources of multidimensional diffusion equation, 77 Yang, Y.-T., Chen, C.-K. and Hsu, P.-T.: Laminar film condensation on a finite-size horizontal wavy disk, 139 Yongyi, C.: See Zhaoyi, L., 15 Zhang, X. F., Heemink, A. W. and van Eijkeren, J. C. H.: Data assimilation in transport models, 2 Zhaoyi, L., Mai, L. , Yongyi, C. and Xiaoming, L.: A special random selective service queueing model for access to a star LAN, 15 Zhitnikov, V. P.: See Terentiev, A. G., 91 Zhu, X. R., Harding, R. A. and Campbell, J.: Calculation of the free surface shape in the electromagnetic processing of liquid metals, 207 Zoppou, C.: See Barry, S. I., 681
KEYWORD INDEX AGO, 611 Acceleration center, 471 Acceleration, 471 Acceleration-axes, 471 Access mode, 15 Agroecosystem, 165 Algebraic stress model, 709 Analytical techniques, 721 Anisotropy, 145 Annular liquid jets, 363 Arbitrary cross-section beams, 339 Arbitrary meshes, 691 Artificial neural networks, 215
Index, Volume 2 1, 1997 Artificial neural networks, 739 Assemblies, 801 Asymptotic stability, 673 Automated guided vehicle, 301 Axisymmetric flows, 91 Axisymmetty, 783 B-spline curve, 557 B-splines, 651 Backorders, 21 Bathymetty grids, 699 Bernstein basis, 557 Bezier curve, 557 Bifurcations, 673 Bloch’s equations, 221 Bolts, 801 Boundary absorption, 275 Boundary elements, 763 Boundary integral equation, Bubble dynamics, 127 Bubble ignition, 127 Bubble oscillations, 127 Bubbles, 91 Buoyancy driven flow, 66 Buoyancy, 371 Buoyancy, 709
77
CFD, 503 Calculations, 207 Cartesian grid, 749 Cavitation, 91 Cellular flames, 739 Chebyshev polynomial, 749 Chebyshev, 255 Circulation modelling, 633 Coastal ocean modelling, 633 Coastal ocean system, 633 Cold rolling, 579 Computational fluid dynamics, 495 Computer modelling, 633 Computer simulation, 26 Computer simulation, 419 Computer-aided design, 557 Computer-aided design, 651 Conduction heat transfer, 447 Constant weight code, 667 Coupled bending and torsion, 339 Coupled heat and moisture, 721 Crop planning, 621 Curved tube, 275
Engine dynamics, 481 Entrainment, 709 Escape phenomena, 108
Jets, 643
Facility layout, 301 Fatigue limit, 611 Film condensation, 139 Filter, 681 Finite automaton, 455 Finite difference energy, 691 Finite difference method, 48 Finite difference, 221 Finite element analysis, 113 Finite element method, 339 Finite element method, 419 Finite element, 207 Finite element, 97 Finite elements, 319 Finite integral transform, 387 Flexible rod, 793 Floating reference frame, 793 Flow in pipe-bends, 48 Flow, 437 Flow-rate fluctuations, 363 Forgetting, 523 Formability, 579 Formation theory, 345 Free convection, 603 Free surface shape, 207 Free vibration, 339 Free-surface flow, 643 Fully-developed internal flows, 503 Gas bubbles, 371 General spatial motion, 471 Generalized analytic functions, Generalized methods, 387 Genetic algorithm, 301 Gravel-bed rivers, 699 Green’s function, 509 Grey system, 611 Grid embedding, 427 HVAC simulation, 535 Hardening exponent, 579 Heating systems modelling, 535 Heterogeneous stations, 42 Hydraulic, 437 Hygrothermoelasticity, 721 k - E model, 709
Damage, 319 Data assimilation, 2 Deformable, 681 Digital modeling, 233 Dislocation damping, 26 Dispersion, 275 Distribution storage, 495 Dynamical systems, 739 Dynamics, 801 Elastic foundation, 547 Elastic tube, 181 Elastostatics, 763 Electromagnetic field, 207 Elliptic, 399 Engine NVH, 481
Incompressible, 97 Indirect measurement, 611 Initial strain, 145 Initial stress, 145 Initial stress, 181 Integral equation, 145 Integral method, 139 Integration, 763 Intermittency, 709 Internal friction, 26 Interval system, 233 Inventory theory, 21 Inverse source problem, 77 Investment casting, 113 Inviscid incompressible fluid, 91
91
Kalman filtering, 2 Karhunen-Lo&e decompositions, Kinematics, 471 Knitted structure, 455 Knitting machine, 455 Kriging, 2 Kriging, 699
739
Laminar boundary layers, 749 Learning, 523 Linear procedure, 447 Linear programming, 621 Linear quadratic tracking, 591 Load forecast, 215 Local grid refinement, 427 Loosening, 801 Lost sales, 21 Lot sizing, 85 Low-Reynolds number, 783 MHD channel flow, 287 MHD flow, 603 Machine interference, 42 Maintenance and resetting cost, 85 Maintenance interruptions, 85 Malfunction, 455 Masonry, 319 Mass transfer, 363 Mass transfer, 371 Materials handling, 301 Mathematical model, 419 Mathematical modeling, 48 Mathematical modelling, 633 Matrix, 261 Minimum break, 523 Mixing, 66 Modelling, 437 Modelling, 801 Monodromy matrix, 793 Moving boundary, 127 Multi-body system simulation, 481 Multidimensional diffusion equation, Multilayered half space, 509
77
Near-wall conditions, 783 Needle damage, 455 Neural network, 673 Nonhomogeneous, 399 Nonlinear boundary conditions, 447 Nonlinear dynamics, 108 Nonlinear elasticity, 97 Nonlinear oscillators, 108 Nonlinear problems, 255 Numerical analysis, 91 Numerical grid generation, 633 Numerical methods, 503 Numerical modeling, 699 Numerical modelling, 691 Numerical simulation, 447 Numerical, 437 Optimal control theory, 345 Optimal design, 345 Optimal feedback control, 165 Optimisation, 667 Optimization, 21
Appl. Math. Modelling,
1997, Vol. 21, December
813
Index, Volume 21, 1997 Optimum crop mix, 621 Orthogonal-polynomials, 399 Oscillating pressure gradient, 287 Oxygen transport, 419
Reservoir management, 591 Richardson extrapolation, 427 Rolling direction, 579 Rotating flows, 749
Pade approximation, 233 Parallel, 261 Parameter identification, 345 Parametric resonance instability, 793 Performance, 293 Periodic heating, 387 Perturbation method, 275 Perturbative methods, 221 Phoenics, 783 Plastic prestrain, 579 Plasticity, 319 Plate bending, 691 Plate, 399 Plate, 547 Point source, 77 Polynomial basis conversion, 651 Poro-elastic, 681 Porous media, 603 Porous, 681 Postbuckling analysis, 547 Potential wells, 108 Power basis, 557 Power systems, 215 Preventive maintenance, 85
Sampled-data system, 233 Second-order motion properties, 471 Secondary flows, 275 Selective withdrawal, 643 Sensitivity analysis, 113 Series, 261 Sheet metals, 579 Simulation, 293 Simulation, 783 Singular value decomposition, 557 Slider-crank mechanism, 793 Slightly compressible, 97 Snoek-Koster peaks, 26 Spectral method, 255 Spectral method, 275 Stability switches, 673 Star LAN, 15 Starvation, 293 State space, 261 Stochastic dynamic programming, 591 Stochastic systems, 247 Stochastic waves, 247 Strain history, 579 Stress and strain transformations, 579 Structural dynamics, 319 Structures, 261 Surface-breaking waves, 633 Systemic capillaries, 419
Quadratic,
261
R-value (width/thickness strain ratio), r operatives, 42 Random oscillator, 247 Random selective service, 15 Rayleigh-Taylor instability, 66 Reactive bubble, 127 Register insertion, 293
814
,579
Appl. Math. Modelling,
TLM modelling, 221 Tabu search, 667 Technical coefficient, 165 Tensile test, 579 Tensor function, 579
1997, Vol. 21, December
Tensor functions, 579 Test-bed for controllers, 535 Thermal gradients, 371 Thermal stratification, 603 Thermocapillary, 371 Threaded fasteners, 801 Tikhonov regularisation, 651 Tissue PO*, 419 Transfer function, 611 Transient heat conduction, 387 Transport models, 2 Transverse isotropy, 509 Trefftz finite element, 547 Triangulation, 699 Turbulence, 783 Turbulent flow, 48 Two-fluids model, 66 Two-phase flow, 287 Two-phase flow, 419 Uncertain system, 233 Underwater vehicle, 783 Unsteady flow, 287 Valve, 437 Vehicle scheduling, 301 Vibration, 399 Viscous fluid, 181 Volume distance. 301 Waste disposal, 165 Water networks, 495 Water quality, 495 Waterfalls, 643 Wave propagation, 181 Wavy disk, 139 Weighted residual approach, Yield function,
579
77