- Email: [email protected]
systems
DEVELOPMENTS NEW EQUIPMENT, PROCESSES, & MATERIALS Oil Removal System Abanaki Corp. Chagrin Falls, Ohio The Ahanaki Gil Grabber Model 4 is now available with belts made of fiberreinforced plastic that can handle oil temperatures up to 212’F. The unit also has new wide, deeper troughs that allow it to accept more viscous oil. The Oil Grabber now has a steel mesh guard that allows visual inspection of the drive pulley. The guard has no screws and is simply removed. The Model 4 removes oil from water and water-based solutions at a rate up to 20 gal/hr and can be used in depths ranging from 1 to 100 ft or more.
available with auto reverse, air to the tabletop, and slip ring assembly to bring power to the tabletop. Both the rotating table and spray arm feature variable-speed drive.
The sampling pumps also feature a rustproof chemical-resistant coated aluminum housing, 28-ft water lift, and silicone or C-flex tubing. Circle 403 on the reader service card In-Process Cleaners BetzDearborn Metals Process Group Horsham, Pa. BetzDearborn Metals Process Group has a new multimetal in-process cleaner with short-term rust protection. This material contains no surfactants, which allows its use at ambient temperatures without excessive foaming. DH-7692 outcleaned other in-process cleaners for oil-based lubricants and has been formulated to not darken or discolor highly machined aluminum surfaces. Circle 404 an the reader service card
Circle 402 cm the reader service card
Liquid Sampling Pumps/Systems Barnant Co. Barrington, 111.
Coating Thickness Gauges CM lnfernational E/k Grove Wage, 111. The new hand-held CGX-S/2 Series of coating thickness measuring gauges with scanning circuitry that transmits high and low readings directly to a PC
Fixed and variable rate liquid sampling pumps are easily portable for use in the field or in the plant. A rechargeable 12V DC battery is built into the pumps, allowing for continuous operation, up to 2% hours on each charge.
Circle 401 on the reader sarvice card
Rain/Spray Test Chamber Atotech USA Inc. Strongsville, Ohio A new, upgraded rain/spray test chamber corrosion test chamber features polypropylene or stainless steel construction and a front-opening door with safety interlock. The rotating spray arm, with spray bar and nozzles, operates in temperatures ranging from -40 to 125’C. The rotating table is METAL FINISHING
. NOVEMBER
1997
79
available with auto reverse, air to the tabletop, and slip ring assembly to bring power to the tabletop. Both the rotating table and spray arm feature variable-speed drive.
The sampling pumps also feature a rustproof chemical-resistant coated aluminum housing, 28-ft water lift, and silicone or C-flex tubing. Circle 403 on the reader service card In-Process Cleaners BetzDearborn Metals Process Group Horsham, Pa. BetzDearborn Metals Process Group has a new multimetal in-process cleaner with short-term rust protection. This material contains no surfactants, which allows its use at ambient temperatures without excessive foaming. DH-7692 outcleaned other in-process cleaners for oil-based lubricants and has been formulated to not darken or discolor highly machined aluminum surfaces. Circle 404 an the reader service card
Circle 402 cm the reader service card
Liquid Sampling Pumps/Systems Barnant Co. Barrington, 111.
Coating Thickness Gauges CM lnfernational E/k Grove Wage, 111. The new hand-held CGX-S/2 Series of coating thickness measuring gauges with scanning circuitry that transmits high and low readings directly to a PC
Fixed and variable rate liquid sampling pumps are easily portable for use in the field or in the plant. A rechargeable 12V DC battery is built into the pumps, allowing for continuous operation, up to 2% hours on each charge.
Circle 401 on the reader sarvice card
Rain/Spray Test Chamber Atotech USA Inc. Strongsville, Ohio A new, upgraded rain/spray test chamber corrosion test chamber features polypropylene or stainless steel construction and a front-opening door with safety interlock. The rotating spray arm, with spray bar and nozzles, operates in temperatures ranging from -40 to 125’C. The rotating table is METAL FINISHING
. NOVEMBER
1997
79