Masters titles

Masters Titles The following titles of masters theses were selected from Musters Abstracts published quarterly by University Microfilms International. The full abstract may be found in the referenced issue of Musters Abstracts on the page given towards the end of each entry. The last entry (MAXXXXX) gives the identification code that may be used to order a copy of the full text when available from University Microfilms International. Copies of masters theses may be obtained by addressing your request to: University Microfilms International, 300 North Zeeb Road, PO Box 1764, Ann Arbor, Michigan 48106, USA; or by telephoning (toll-free) 800-521-3042 in the US. Masters thesis titles are published with the permission of University Microfilms International, publishers of Musters Abstracts (copyright@ 1994 by University Microfilms International) and may not be reproduced without their prior permission.

Referenced Volume: Masters Abstr. 32(5) (1994) Terminal-functionalized polyt-butyl acrylates via living anionic polymerization. W. Mollberg. The University of

Numerical simulation of viscoplastic material flow through extrusion dies. S. Abdali. University of Ottawa

Comportement en fatigue de materiaux composites unidirectionnels pultrudes. M.R. Adimi. Ecole

1993. Arizona. MA1356784

(Canada).

p 1424.

MAMM85815

Polytechnique (Canada). 1992. 150~~. p 1457. MAMM86425

Polyoxypropyleneamine/diethyltoluenediamine blend curing agent systems for epoxy resins. Y.-T. Chu.

Contribution au developpement de pro&d& chhniques de recuperation des poly-/3-hydroxyalcanoates. R.

Convection naturelle de fluides nonNewtoniens dans un milieu poreux conf”mk.B. Amari. Ecole Polytechnique

University of Massachusetts-Lowell. 1994.104pp. p 1401. MA1357057

Voyer. Ecole Polytechnique (Canada). 1993.22Opp. p 1427. MAMM86453

MAMM86423

Etude de la morphologie et de l’orientation de systemes 5 base de copolymeres B blocs. A. Khadir.

Etude de la rupture sous choc des polymeres ductiles. S.M. Habti El

36pp.

p

1400.

UniversidLaval (Canada). 1993.84~~. p 1402. MAMM85695 Mechanistic trodeposition

studies of the elecof polythiophenes. Z.

1992.

204~~.

Idrissi. Ecole Polytechnique (Canada). 1992.162~~. p 1456. MAMM86504 Caracterisation viscoelastique du polyamide 667 renforcd de fibres de verre orientees, moulC par injection.

Zhao. Memorial University of Newfoundland (Canada). 1993. 148~~. p 1402. MAMM86623

M. Hadid. Ecole Polytechnique (Canada). 1993. 158~~. p 1456.

Study of ultraviolet absorption and photoconduction spectra of polyhnide films fabricated at various curing temperatures. L. Kan. The University of

A measurement of rubber-matrix adhesion and its correlation with material parameters to predict toughening in commercial thermoplastics. T.

Manitoba (Canada). 1993.84~~. p 1405.

Janczek. University of MassachusettsLowell. 1994.96pp. p 1456. MA1356987

MAMM85923

POLYMER

CONTENTS

MAMM86505

4

(Canada).

1993.

78pp.

p

1457.

Developpement d’un spectrometre photoacoustique pour la mesure des viscoelastiques des proprietes polymeres. A. Cournoyer. Ecole

Polytechnique (Canada). 1992.240~~. p 1459. MAMM86426 Analysis of lap joints for chevron-segmented fibrous damping composites.

L.W. Finlinson. Utah State University. 1994.85~~. p 1460. MA1356999 Etude de l’ecoulement dans les multicouches pour le moulage par transfer3 de &sine. A. Kerachni. Ecole

Polytechnique (Canada). 1992.120~~. p 1462. MAMM86458

01995

Elsevier

Science

Limited

Etude de la thermoformabilite des thermoplastiques sur moules positifs. B. Larose. Ecole Polytechnique (Canada). 1992. 126~~. p 1462.

Weld line strength of poly(methy1 methacrylate). M. Kandpal. University of Massachusetts-Lowell. 1994. 133~~. ~1474. MA1357068

MAMM86459 Fabrication et propert&& mdchaniques de structures sandwich thermoplastiquesifibre de verre. M. Ouddane. Ecole Polytechnique (Canada). 1993. 159pp. p 1463.

MAMM86497 Dielectric and mechanical response properties of syntactic polyurethane University of foam. J.E. Andrusaitis. Massachusetts-Lowell. 1994. 107~~. p 1472. MA1357052 Optimisation des parametres de mise en forme du composite peek/fibre de H. Ben Daly. Ecole carbone. Polytechnique (Canada). 1993.208~~. p 1473. MAMM86410 Compatibility of unplasticixed polyvinyl chloride and polymethyl methacrylate blends. D.M. Burke. University of Massachusetts-Lowell. 1994. 14Opp. p 1473. MA1356986 Developing the extrusion processing parameters of 85/15 poly(DL-lactic acid)/poly(&-caprolactone) copolymer and evaluating the effects of yradiation on the film’s properties. D. Carmen-Attia. University of Massachusetts-Lowell. 1994. 114pp. p 1473.

Melt fracture of polypropylene in capillary flow. K.-S. Leong. University of Massachusetts-Lowell. 1994. 102~~. p 1474. MA1357071 Effect of wall thickness on impact strength. S.M. Rashid. University of Massachusetts-Lowell. 1994. 136~~. p 1474. MA1357075 A study of the effects of fiber blend ratio on tensile characteristics of thermoplastically bonded Kevlars iiber composites. T.-Y. Su. University of Massachusetts-Lowell. 1994. 64pp. p 1474. MA1357079 Recycling of post consumer automotive carpet. J.W. Tseng. University of Massachusetts-Lowell. 1994. 107~~. p 1474. MA1357081 Optimisation empirique de la consolidation des preimpregnes thermoplastiques. M.T.G. Vovor. Ecole Polytechnique (Canada). 1993. 158~~. p 1474. MAMM86455 An experimental study of ejection temperature and cooling time for injection molding. Y.-S. Wang. University of Massachusetts-Lowell. 1994. 146~~. p 1475. MA1356988

MA1357055 The Chemical Agents Resistant Coating (CARC) system. E.M. Dufour. University of Massachusetts-Lowell. 1994. 148~~. p 1473. MA1357062 Evaluation of PET and recycled PET as replacements for a PETG packaging tray. J.C. Griffin. University of Massachusetts-Lowell. 1994. 63pp. p 1473.

MA1357065 A study of ultraviolet light exposure and weathering of low density polyethylene foams. J.E. Huguenin. University of Massachusetts-Lowell. 1994. 125~~. p 1474. MA1357067

POLYMER

CONTENTS

5

01995

Elsevier

Science

Limited