Mesoporous silica-based bioactive glasses for antibiotic-free antibacterial applications

Mesoporous silica-based bioactive glasses for antibiotic-free antibacterial applications

Materials Science & Engineering C 83 (2018) 99–107 Contents lists available at ScienceDirect Materials Science & Engineering C journal homepage: www...

549KB Sizes 0 Downloads 52 Views

Materials Science & Engineering C 83 (2018) 99–107

Contents lists available at ScienceDirect

Materials Science & Engineering C journal homepage: www.elsevier.com/locate/msec

Review

Mesoporous silica-based bioactive glasses for antibiotic-free antibacterial applications Seray Kayaa, Mark Cresswellb, Aldo R. Boccaccinia, a b

T



Institute of Biomaterials, University of Erlangen-Nuremberg, Cauerstrasse 6, 91058 Erlangen, Germany Lucideon Ltd., Stoke-on-Trent, ST4 7LQ, UK

A R T I C L E I N F O

A B S T R A C T

Keywords: Mesoporous Antibacterial Bioactive glass Sol-gel technique Antibiotic-free

Bioactive glasses (BGs) are being used in several biomedical applications, one of them being as antibacterial materials. BGs can be produced via melt-quenching technique or sol-gel method. Bactericidal silver-doped solgel derived mesoporous silica-based bioactive glasses were reported for the first time in 2000, having the composition 76SiO2-19CaO-2P2O5-3Ag2O (wt%) and a mean pore diameter of 28 nm. This review paper discusses studies carried out exploring the potential antibacterial applications of drug-free mesoporous silica-based BGs. Bioactive glasses doped with metallic elements such as silver, copper, zinc, cerium and gallium are the point of interest of this review, in which SiO2, SiO2-CaO and SiO2-CaO-P2O5 systems are included as the parent glass compositions. Key findings are that silica-based mesoporous BGs offer a potential alternative to the systemic delivery of antibiotics for prevention against infections. The composition dependent dissolution rate and the concentration of the doped elements affect the antibacterial efficacy of BGs. A balance between antibacterial activity and biocompatibility is required, since a high dose of metallic ion addition can cause cytotoxicity. Typical applications of mesoporous BGs doped with antibacterial ions include bone tissue regeneration, multifunctional ceramic coatings for orthopedic devices and orbital implants, scaffolds with enhanced angiogenesis potential, osteostimulation and antibacterial properties for the treatment of large bone defects as well as in wound healing.

1. Introduction The first bioactive glass (BG) was invented by Prof. Larry Hench at the University of Florida in 1969 [1]. This bioactive glass has a composition of 46.1SiO2-24.4Na2O-26.9CaO-2.6P2O5 (mol%), it was later termed 45S5 Bioglass®, and exhibits as a key property the formation of a bond with bone [1,2]. From a compositional viewpoint, bioactive glasses can be basically divided into three groups, depending on the representative network former oxide present in the formulation, i.e., SiO2-based (silicate), B2O3-based (borate) and P2O5-based (phosphate) systems. The first group comprises a wide range of glass formulations, including 45S5 Bioglass® and other typical compositions such as 1393 BG (wt%: 53SiO2-6Na2O-12K2O-5MgO-20CaO-4P2O5) [3–5] and S53P4 BG (53%SiO2-23%Na2O-20%CaO-4%P2O5) [6–8] commercially named as BonAlive® (BonAlive Biomaterials, Turku, Finland). Borate glasses are characterized by their higher reactivity in comparison to silica-based glasses, which results in faster bioactive kinetics [5,9]. Phosphate glasses are resorbable materials and their dissolution rate can be tuned according to their oxide composition [10].



Various amounts of other oxides are incorporated in silicate, borate or phosphate BGs to impart particular properties to the material; for instance, CaO, K2O, Na2O and MgO are useful to adjust the surface reactivity in the biological environment; ZnO, CuO and Ag2O allow the release of biologically active ions with antibacterial properties [11]. BGs can be produced by two different methods; namely the classic oxide melting procedure and the sol-gel method. Since sol-gel BGs are more bioactive and bioresorbable [12–14] than melt-quenched glasses, in some applications the use of sol-gel BGs is preferred. The sol-gel method has advantages of compositional purity and molecular mixing, allowing control of the sample porosity by changing the processing conditions and/or by adding suitable templates [15]. The use of templates during the sol-gel process generates products with an ordered mesoporous structure which induces higher bioactivity with respect to melt-quenched glasses [16] and makes them suitable for use in drug delivery applications [17–20]. Bone reconstruction surgeries can be compromised by osteomyelitis caused by bacteria infection and to treat these, systemic antibiotic administration, surgical debridement, wound drainage and implant

Corresponding author. E-mail address: [email protected] (A.R. Boccaccini).

https://doi.org/10.1016/j.msec.2017.11.003 Received 31 May 2017; Received in revised form 23 August 2017; Accepted 9 November 2017 Available online 10 November 2017 0928-4931/ © 2017 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/BY-NC-ND/4.0/).

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

glasses) and MBGs (Mesoporous bioactive glasses). In addition, the schematic diagram in Fig. 2 (right) gives information about the biological function of some metallic ions that can be added to MBG compositions to enhance their biological functionalities [37]. Prevention against bacterial infection is an essential need in orthopedic surgery due to the significant medical complications to patients related to infections [38]. Although strict hygienic protocols and preventive antibiotic prophylaxes have drastically reduced the percentage of postoperative infections, many bacterial species have developed selective resistance against antibiotics that can cause serious infections, which are hard to recover from and usually lead to second operations. An alternative to the systemic delivery of antibiotics is the use of orthopedic devices or prostheses made from synthetic materials with intrinsic antibacterial properties [39–42]. In this context, silica-based bioactive glasses offer a potential alternative to the systemic delivery of antibiotics for prevention against bacterial infections. The antibacterial properties of bioactive glasses have been investigated by Stoor et al. [43–45] from the clinical point of view. According to their study on S53P4 BG, in an aqueous environment, ions (Ca2 +, Na+, PO43 −, and Si4 +) are released from the S53P4 BG which results in a rise in pH and osmotic pressure in its vicinity. These factors potentially influence the viability of oral microorganisms at the dentogingival margin indicating potential for use in dental applications. The antibacterial effects of a paste made of a bioactive glass (S53P4) on oral microorganisms were examined [43]. It was found that Actinomyces naeslundii bacteria lost its viability within 10 min when exposed to calcium, phosphorus, silicon and sodium dissolution products. The loss of viability was 60 min for Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, and Streptococcus mutans bacteria. Actinobacillus actinomycetemcomitans has been suggested to play a role in juvenile periodontitis [46,47], Porphyromonas gingivalis has been associated with destructive periodontal lesions in adults [48–50] and Streptococcus mutans is considered to play a major role in caries [51]. Indeed the antibacterial effect of BGs is used in clinical settings to combat osteomyelitis [52–55], an infection of bone and bone marrow. Polymethyl methacrylate (PMMA) beads mixed with antibiotics have been used in the treatment of osteomyelitis [56]. However, after two weeks of insertion into the bone defect, these beads must be removed by

removal are applied [21]. These methods are not always effective, so the patients may require subsequent surgeries to combat bacterial infections. Introduction of a local drug release system into the implant site can be another approach to treat the problem [22]. This treatment offers high drug delivery efficiency, continuous action, reduced toxicity and convenience to the patient [21,23]. Mesoporous bioactive glasses (MBGs) are highly attractive for such applications. In 2004, for the first time, Yan et al. [20] developed MBGs with the combination of sol-gel and surfactant templating methods. The obtained MBG particles were around several tens of micrometers in diameter, with highly ordered 5 nm mesopore channels. In comparison with non-mesoporous bioactive glasses (NBGs), MBGs have enhanced surface area, higher pore volume, better ability to induce in vitro apatite mineralization in simulated body fluid (SBF) and excellent cytocompatibility [24–27]. For the preparation of MBGs, the addition of structure-directing agents (e.g. Pluronic P123, F127 and cetrimonium bromide, CTAB) is essential to obtain well-ordered pore structures. Under appropriate synthesis conditions, these agents self-organize into micelles. Micelles link the hydrolysed silica precursors through the hydrophilic component and self-assemble to form an ordered mesophase [18,28]. Then, the mixture reaction system undergoes evaporation-induced self-assembly (EISA) process. Once the mixture is dry and the surfactant has been removed, a well-ordered mesoporous structure is obtained, having high surface area and high porosity. The basic process to produce mesoporous silica is illustrated in Fig. 1 [28]. In 2006 and 2008 MBG powders with 58S and 77S compositions having excellent in vitro bioactivity were prepared by hydrothermal treatment using P123 [19,29]. By using the same method, in 2008 Li et al. [30] prepared Mg, Zn or Cu containing MBG particles. Later in 2010 CaO-SiO2 MBG particles were synthesized for hemostatic applications [31]. There is a general trend to upgrade the properties of MBGs with some of the well-known therapeutic ions [11,32–34]. By substituting small amounts of oxides, the osteogenesis, antibacterial capacity, angiogenesis or cementogenesis [34–36] effects of MBGs can be improved. Fig. 2 (left) illustrates the year of discovery and the average time required for the in vitro bioactive response of three different silicate glass families, MPGs (melt-prepared glasses), SGGs (sol-gel bioactive

Fig. 1. Steps required to synthesize mesoporous silica from a micellar solution, according to Arcos and Vallet-Regi [28]. (Reproduced with permission of Elsevier).

100

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

Fig. 2. (Left): Discovery years of three bioactive silicate glass types showing the average time required for achieving bioactivity, determined by the formation of HA on the surface upon immersion in SBF. (Right): Typical metallic ions added to these glasses and their biological functions. (Modified from ref. [37]).

free BGs which achieve antibacterial effects exclusively by the release of metallic ions. Therefore the aim of this review is to summarize the information available in the open literature on the antibacterial properties of mesoporous silica-based bioactive glasses with emphasis on the specific antibacterial effects of therapeutic ionic dissolution products without any drugs or antibiotics added. The studies reviewed in this article consider thus the antibacterial activity of sol-gel derived SiO2-CaO and SiO2-CaO-P2O5 mesoporous bioactive glasses based on incorporation of antibacterial metallic ions into the glass structure. The composition dependent dissolution rate and the concentration of the doped elements affect the antibacterial efficiency of bioactive glasses. Studies have shown that a balance between antibacterial activity and biocompatibility is required since a high dose of metallic ion addition can lead to cytotoxicity [76,77], these aspects are also addressed in this review.

surgery [57], since beads release about 24% ( ± 11%) of their antibiotic content (mini-beads even up to 93 ± 1.4%) [58]. Besides the antibiotic release issue, unexpected bone loss can occur when these beads are used [59]. Having discovered that S53P4 bioactive glass has antimicrobial properties [4,7,54], this glass took the place of polymer beads in the treatment of chronic osteomyelitis [53,54,60]. Polymer beads are effective against osteomyelitis treatment when they are mixed with antibiotics; however in this case they have to be removed by surgery due to their release of antibiotics and bone loss issues [58,59]. Compared with polymer beads, bioactive glasses are osteoconductive and biocompatible materials [60]. In addition to their potential use in bone and tissue repair applications, BGs provide antibacterial and blood vessel promoting properties [11,45]. A range of polymer based antibacterial carriers is available which could be combined with BGs for achieving improved antibacterial effects. For example, cationic proteolytic-resistant polymers with polyamide backbones have been tested for their antimicrobial activities and their cytotoxicity against primary human dermal fibroblasts [61]. These polymers were demonstrated to elicit fast bactericidal activity against A. baumanii, E. coli, K. pneumonia and P. aeruginosa and were non-toxic to epithelial cells which made them safe and potentially useable as broad spectrum ophthalmic antibiotics. Gelatin and antifungal drugloaded gelatin fiber mats have been produced via electrospinning method [62]. Due to their cell compatibility and antifungal properties, electrospun antimicrobial nanofibers can be used in several applications, as scaffolds in controlled drug delivery, wound dressings, tissue engineering, stem cell regeneration and differentiation, and also in food packaging [63–66]. In addition, gentamicin has been incorporated into a layer by layer (LbL) coating with clay interlayer barrier to achieve a controlled bactericidal effect [67–69]. However, the combination of such polymeric substrates (antibiotic carriers) with BGs to exploit potential synergistic effect of antibiotics and antibacterial ions has not been investigated. In general terms, three approaches have been used to investigate the antibacterial activity of bioactive glasses. The first one is based on bioactive glasses that change the local physiological conditions when implanted in the body. The second one includes doping the bioactive glasses with antibacterial metallic elements, so that the glass degrades by releasing ions and induces the bactericidal effect. The last approach investigates antibiotic added to bioactive glasses [17,34,35,70–72]. Moreover, mesoporous bioactive glasses, due to their ordered mesopores which can incorporate biomolecules and drugs, are suitable to achieve the synergistic release of drugs and antibacterial metallic ions to increase the effectiveness against bacteria and to impart other biological effects [73–75]. Considering the interest in combatting infections with minimal use of antibiotics [33,38], however, it is important to investigate antibiotic-

2. Mesoporous silica-based bioactive glasses doped with antibacterial elements 2.1. Silver doped-MBGs Silver ion has been the most studied metal ion as a biocide (defined in the European legislation as a chemical substance or microorganism intended to destroy, deter, render harmless, or exert a controlling effect on any harmful organism by chemical or biological means), as it presents a broad and strong antimicrobial behavior [78–80]. Ag has no toxicity effect to human cells in suitably low concentrations, and it can provide bioactive glasses with extra functionality in addition to their inherent osteoconductivity and bone bonding ability [81–85]. As metallic silver reacts with moisture on the skin surface or with wound fluids, silver ions are released that damage bacterial RNA and DNA, hence inhibiting replication. In the case of silver, inactivation of critical enzymes of the respiratory chain (e.g. succinate dehydrogenase) by metal binding to thiol groups and induction of hydroxyl radicals appear to play a major role [86]. Silver is potentially cytotoxic if released in great amounts and thus, strict control of the introduced Ag amount is necessary. It is well-known that surface functionalization of glasses can occur by ion-exchange treatments while enabling the bulk structure and main properties to remain unaltered. In such a way silver can be introduced by ion exchange in the outer layers of glass surfaces, conferring to them antibacterial properties while maintaining the intrinsic BG characteristics [76,77,87]. A wide range of silver doped silica glasses (Ag-BG) have been developed by sol-gel methods [81,82,88–95] to create bioactive glasses exhibiting inhibitory effects on bacterial growth. Among these studies, BGs exhibiting mesoporous structure were produced via sol-gel methods [81,82,92] and via a structure-directing 101

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

mesoporous bioactive glasses have already been proven in many studies [95,101,102]. Due to their controllable dissolution rate, soluble glasses represent an attractive delivery system for antibacterial copper ions. In one of these relevant investigations, 62.3SiO2–28.9CaO-8.6P2O5 (wt%) sol-gel produced bioactive glass was doped with 4.7 and 9 wt% CuO to investigate its behavior against E. coli DH5α ampicillin-resistant and S. mutans bacteria [95]. These Cu-doped glasses had MBC of 100–150 mg/ml for E. coli and 5–10 mg/ml for S. mutans bacteria. The Cu release in SBF from 4.7 wt% CuO doped MBG was in the range 20–60 ppm and for 9 wt% doped ones, it was in the range 20–80 ppm. A further study [101] was carried out to prepare structure directing agent assisted sol-gel derived copper-doped (molar: 0, 1, 2 and 5%) MBG scaffolds. These scaffolds were shown to possess good biocompatibility with no significant cytotoxic effect on human bone marrow stromal cells (hBMSC) and in addition the incorporation of 5 mol% Cu induced a significant antibacterial effect against E. coli. The released Cu2 + ions from MBG scaffolds significantly inhibited the viability of Escherichia coli, as shown in Fig. 3 [101]. A glass system made by sol-gel method with the composition 75SiO2-(25-x)CaO-5P2O5-xCuO (x = 0, 2, 5 mol%) was incorporated into a nanocoating to produce nanocomposite films for wound healing applications [102]. 5 mol% CuO doped films had better antibacterial activity than pure and 2 mol% CuO doped films against E. coli, due to increased Cu ion release into DMEM medium after 7 days (0.0491 ppm vs 0.0391 ppm, respectively). For the development of wound dressings, prevention against bacterial infections and enhancement of angiogenesis are the key issues which have to be taken into account. Wounds heal faster with the transportation of nutrients and removal of waste products from the tissues; therefore new blood vessel formation (angiogenesis) is very important [103,104]. When a wound is infected by bacteria, the process of healing will take longer [105]; which has to be prevented or treated with appropriate biomaterials like BGs [102]. In terms of these requirements, Cu-BG nanocomposite films are promising biomaterials for wound dressing applications also providing antibacterial properties. Composites of nanofibrillated cellulose (NFC) and Cu doped (2 and 5 mol%) MBG which have molar ratios of Si/Ca/P = 80/15/5 were developed in aerogel form [106]. After successful production of these composites, their dissolution behavior, mineralization, cytotoxicity, angiogenic performance and the antibacterial properties were examined against E. coli. Cu-MBGs were shown to have ordered and hexagonally packed mesoporous structure, high surface area and large volume of pores. These endow Cu-MBGs with high bioactivity when the material is immersed in SBF. When Cu-MBGs were added to NFC fibrils, they retained the absorption capability of NFC aerogels, therefore controlling the moisture around the wounds, which is beneficial to support the wound healing process. These aerogels enhanced the gene expression of VEGF A, VEGF C, PDGF B and FGF 2 in the culture of 3T3 fibroblasts. 5% Cu doped MBGNFC composite induced HUVEC sprouting and promoted ECM production. Both the NFC-Cu-MBG composites and Cu-MBG (2 and 5 mol% Cu) killed the E. coli strains, the effect of 5 mol% Cu being higher than that of 2 mol% Cu MBG. In a later study, MBGs with 2% molar percentage of Cu (molar ratio Cu/Ca/Si = 2/13/85) and 5% molar percentage of Cu (molar ratio Cu/ Ca/Si = 5/10/85) were prepared by a one-pot ultrasound-assisted solgel procedure and the final textural features, the in vitro bioactive responses and the antibacterial properties of the synthesized MBGs, were tested against E. coli, S. aureus and S. epidermidis [107]. 2% mol Cu-MBG had 550 m2 g− 1 surface area, 2.6 nm size of mesopores, showing in vitro bioactive behavior and a sustained release of Cu2 + ions into SBF. When 2% mol Cu-MBG was exposed to 1 day of incubation in the three bacteria, approximately 30 to 40% of inhibition of bacteria growth was observed. For 3 days of incubation, E. coli and S.

agent assisted sol-gel technique [94,96,97]. In this context, incorporation of Ag2O into sol-gel produced bioactive glass compositions (45S5 BG: 46.1SiO2-24.4Na2O-26.9CaO2.6P2O5 (mol%)) has been reported to minimize the risk of microbial contamination through the leaching of Ag+ ions [81,82]. In 2000, [81] the incorporation of 3 wt% Ag2O in 76SiO2-19CaO5P2O5 (wt%) sol-gel produced mesoporous bioactive glass was shown to exhibit a bacteriostatic effect on Escherichia coli (E. coli) with 0.01% reduced bacterial growth without compromising the glass bioactivity. Sol-gel derived 3 wt% Ag2O incorporated mesoporous silica bioactive glass in the SiO2-CaO-P2O5 system showed good antibacterial property against E. coli, Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus). The effect was attributed to the leaching of silver ions from the glass matrix [82]. It has been confirmed that Ag+ ions in concentrations of 0.05–0.20 mg/ml released from Ag-doped BGs inhibited the growth of different bacterial strains (E. coli, P. aeruginosa and S. aureus) [82]. In the study of Saravanapavan et al. [88], the introduction of Ag2O into sol-gel derived bioactive glass compositions was aimed at minimising the risk of microbial contamination through the potential antimicrobial activity of the leaching Ag+ ions. It was shown that the bioactive glass doped with Ag2O was bacteriostatic and elicited a rapid bactericidal reaction. Another study reported that 60SiO2-2Ag2O-34CaO-4P2O5 (mol%) bioactive glass produced by sol-gel method was suitable to coat surgical sutures. These sutures were shown to be bioactive, and had antimicrobial and bactericidal properties against Staphylococcus epidermidis (S. epidermidis) [89,90]. Moreover, 1 mol% Ag2O incorporated sol-gel derived 70S30C (70SiO2-30CaO) (mol%) bioactive glass scaffold was produced, which released 0.95 μg/ml of Ag+ ions in 23 h, giving a bactericidal effect on E. coli, P. aeruginosa and S. aureus cultures [91]. A study comparing the antibacterial activity of a sol-gel derived silver-doped 64SiO2-26CaO-10P2O5 (mol%) BG with its undoped counterpart against E. coli species showed that the silver-free BG had neither bacteriostatic nor bactericidal effects; however 5 mol% Ag2O doped BG was found to have > 99% killing efficiency towards E. coli [92]. In related studies, 4 and 8 wt% Ag2O were added to 62.3SiO2–28.9CaO-8.6P2O5 (wt%) sol-gel obtained bioactive glass to investigate and to compare their antibacterial behavior with that of undoped BG against E. coli DH5α ampicillin-resistant and Streptococcus mutans (S. mutans) [95]. Both silver loadings demonstrated minimum bactericidal concentration (MBC), of 100–150 mg/ml for E. coli and 5–10 mg/ml for S. mutans, whereas the MBC for the undoped BG was > 300 mg/ml. 3 wt% Ag2O was incorporated into structure-directing agent (Pluronic P123) assisted sol-gel derived 73SiO2-13CaO-11P2O5 (wt%) mesoporous bioactive glass system to investigate the antibacterial properties of this glass [94]. Ag-MBG showed a very good anti-bacterial effect against S. aureus strain, with strong evidence of bactericidal activity at 0.5 mg/ml of glass concentration. MBC decreased from 2.2 × 109 to 2 × 104 CFU/ml from undoped to 3 wt% Ag2O doped MBG (> 99.9% killing efficiency). 58S (60SiO2-36CaO-4P2O5) (mol%) mesoporous BGs produced via structure directing agent (P123) assisted sol-gel method was doped with 1 mol% Ag2O and it was shown that this glass exhibited 100% killing efficiency against E. coli and S. aureus [98]. Table 1 presents a summary of compositions, synthesis methods and results obtained from the studies involving silver containing MBGs discussed above. 2.2. Copper doped-MBGs Copper is a naturally occurring element in the human body being essential to numerous metabolic processes [99,100]. It is, in the right quantities, non-toxic to human tissues, but is known to have a strong effect on microorganisms. The antibacterial properties of CuO doped 102

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

Table 1 Summary of reviewed publications on silver containing MBGs used in antibacterial applications. Reference

Composition

Synthesis method

Antibacterial Results

Bellantone, Coleman, and Hench 2000 [81] Bellantone, Williams, and Hench 2002 [82] Balamurugan et al. 2008 [92]

76SiO2, 19CaO, 5P2O5, 3Ag2O (wt%)

Sol-gel

76SiO2, 19CaO, 5P2O5, 3Ag2O (wt%)

Sol-gel

64SiO2, 26CaO, 10P2O5, 5Ag2O (mol %) 62.3SiO2, 28.9CaO, 8.6P2O5, 4 and 8Ag2O (wt%) 73SiO2, 13CaO, 11P2O5, 3Ag2O (wt %) 60SiO2, 36CaO, 4P2O5, 1Ag2O (mol %)

Sol-gel

Bacteriostatic effect on E. coli MG1655 with 0.01% reduced bacterial growth MBCs (99.9% killing) for AgBG of 1, 0.5, and 0.5 mg/ml For E. coli, P. aeruginosa, and S. aureus, respectively MBC of Ag-BG: 1 mg/ml for E. coli (> 99% killing efficiency)

Palza et al. 2013 [95] Gargiulo et al. 2013 [94] H. Zhu et al. 2014 [98]

Sol-gel Structure directing agent assisted sol-gel Structure directing agent assisted sol-gel

4Ag2O and 8Ag2O: MBC 100–150 mg/ml for E. coli and 5–10 mg/ ml for S. mutans MBC decreased from 2.2 × 109 to 2 × 104 CFU/ml for 3Ag2O doped BG (> 99.9% killing efficiency) 100% killing efficiency towards E. coli and S. aureus

development than the ones with 7 ZnO (mol%). This is likely due to the amount of Zn2 + ions released from the 4 mol% ZnO scaffold being more effective than the amount release from the 7 mol% ZnO scaffolds. In addition, 4 mol% ZnO scaffolds provided better antibacterial properties against S. aureus, which can also be related with the more effective Zn ion release from 4 mol% ZnO doped MBG than the 7 mol% doped one. In a recent study [37], the inclusion of 4 ZnO (mol%) substituting SiO2 in 80SiO2-15CaO-5P2O5 (mol%) BG scaffolds was reported to drastically increase the amount of dead bacterial cells (S. aureus). Also, this amount of added ZnO increased the osteoblast development when zinc containing scaffolds were soaked in extracts of culture medium for 1, 3 and 6 days. Atkinson et al. [117] prepared three MBGs having composition 70SiO2-(26-x)CaO-4P2O5-xZnO (x = 0, 3 and 5 mol%) by the combined sol-gel process and polymer templating methods. Their antibacterial properties were tested against Bacillus subtilis (B. subtilis) and Pseudomonas aeruginosa (P. aeruginosa). 3 mol% ZnO doped MBGs had 40% inhibition for B. subtilis and up to 31–35% inhibition for P. aeruginosa after 2 h of incubation. 5 ZnO (mol%) doped MBG showed the highest antibacterial effect with 91.3% inhibition for B. subtilis after 2 h incubation, as well as 89.4% inhibition for P. aeruginosa. The higher antibacterial inhibition achieved by the 5 mol% ZnO doped MBGs in comparison to the 3 mol% ones can be correlated with higher zinc concentration determined in the SBF solution after the 14th day of immersion. 2 ppm of zinc concentration was observed for 5 mol% ZnO MBGs and 1.8 ppm for the 3 mol% doped ones. However, the 5 mol% ZnO composition had a lower rate of hydroxyapatite precipitation, which is a prominent marker of bioactivity for BGs [118]. The authors suggested that the best performing material from this study for implant applications was the 3 mol% ZnO added MBG, since it displayed medium HA precipitation and antibacterial properties.

Fig. 3. Released Cu2 + ions from MBG scaffolds significantly inhibited the viability of bacteria according to ref. [101]. ⁎0Cu-MBG group compared to blank control (p < 0.05). ⁎⁎ 5Cu-MBG group compared to blank control and 0Cu-MBG group (p < 0.01). The Cucontaining scaffolds significantly inhibited bacterial viability compared to scaffolds without Cu. (Modified from ref. [101]).

aureus were killed to an extent of 70 to 75% and S. epidermis was nearly up to 50%. According to the final properties, this Cu-MBG which has both excellent bioactivity and antimicrobial property can be considered a suitable candidate to prevent infections and to treat bone defects.

2.3. Zinc doped-MBGs

2.4. Cerium doped-MBGs

Zinc has important effects in the development, formation and metabolism of bone cells [108–110], in the growth of blood vessels [111] and as antibacterial agent [112]. It also improves wound healing [113,114]. Zinc provides antibacterial activity by inhibiting glycolysis, transmembrane proton translocation and acid tolerance in bacterial cells [115]. Having high impact on bone formation and growth and with its antibacterial properties, zinc ions are being increasingly considered in combination with BGs for bone regeneration applications [110]. 80SiO2-15CaO-5P2O5 (mol%) mesoporous bioactive glass (MBG) scaffolds doped with 4 and 7 ZnO (mol%) were investigated for their cytocompatibility and antibacterial properties against S. aureus [116]. 4 ZnO (mol%) substitution was shown to make the MBG a suitable candidate for bone regeneration applications [116] since scaffolds with this composition led to better human osteoblast-like (HOS) cell

It has been reported that Ce3 + ions reduce enamel demineralization, are neuroprotective [119] and promote antibacterial behavior when added into biomaterials [120]. Goh et al. [120] added 1, 5 and 10 mol% CeO2 into 50SiO2-45CaO5P2O5 (mol%) mesoporous silicate glasses via quick alkali mediated solgel method. The antibacterial properties were investigated using the quantitative viable count method. It was found that 5 and 10 mol% CeMBGs exhibited significant antibacterial properties compared to 1 mol % Ce and undoped samples. The antibacterial mechanism of cerium (III) ion was reported to be by binding rapidly to E. coli cells, inhibition of endogenous respiration of cells as well as penetration into the cytoplasm of the cells and interfering with their metabolic functions [121]. All samples were confirmed to have suitable bioactivity, with induced formation of apatite particles upon immersion in simulated body fluid (SBF). These Ce-MBGs were reported to have potential 103

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

applications in the bone regeneration field.

promising antibacterial properties [120]. Gallium ions are effective against bone desorption and for the treatment of osteoporosis and cancer related hypercalcemias [137,138]. Ga is also effective against organisms causing tuberculosis and malaria in human beings as well as against Pseudomonas aeruginosa [139,140]. Moreover, besides limiting bacteria attachment, these ions can inhibit bacteria replication by damaging bacteria RNA and DNA, i.e. silver ions, or decreasing bacterial Fe uptake, i.e. gallium ions. Silver has been used more than the other antibacterial ions (Cu, Zn, Ce and Ga) as it has a broad and strong antimicrobial behavior and has no toxicity effect to human cells in suitable concentrations, thus providing extra functions to BGs in addition to osteoconductivity and bone bonding ability.

2.5. Gallium doped-MBGs The US Food and Drug Administration (FDA) has approved Ga3 + as an effective agent for treating bone resorption, autoimmune disease, for inhibition of biofilm formation, for bone, colon and prostate cancer treatments [122] and also for fighting against both Gram-positive and Gram-negative bacteria [37,123–128]. Salinas and Vallet-Regí [37] carried out a study on the production of scaffolds made of mesoporous 3.5 Ga2O3 (mol%) substituted for SiO2 in 80SiO2-15CaO-5P2O5 (mol%) bioactive glasses. Ga3 + ions were hardly released from the glass network; therefore it is unlikely that they imparted antibacterial property to the glasses. A recent study done by Pourshahrestani et al. [126] investigated the effects of 1–3 Ga2O3 (mol%) addition on the antibacterial properties of 80SiO2-15CaO-5P2O5 (mol%) ordered mesoporous bioactive glasses, in which they found that 3 Ga2O3 (mol%) addition had the highest antibacterial rate against S. aureus with 99% after 12 h of incubation. The highest antibacterial rate can be related with the highest Ga ion concentration after the release into Tris–HCl solutions. After 150 h of incubation, solutions of 1, 2 and 3 mol% Ga2O3 doped MBGs had around 0.1, 0.23 and 0.32 ppm of Ga ion concentrations, respectively. Moreover, Sanchez-Salcedo et al. [127] synthesized mesoporous glasses with the composition 80SiO2-15CaO-5P2O5 (mol%), containing 5 mol% of Ga2O3 via evaporation induced self-assembly method. It was shown that the Ga3 + concentrations released from MBG into Dulbecco's Modified Eagle Medium (DMEM) and Todd Hewitt Broth (THB) were in the non-cytotoxic levels, also in the effective antibacterial range against P. aeruginosa and not far from the effective range against S. aureus. In DMEM, the maximum Ga3 + concentration obtained was 2.5 ppm, which is below the toxicity limit of Ga3 + in blood plasma (14 ppm) [38]. In THB the release of Ga3 + concentration was 9.8 ppm, which is 140 times higher than the IC90 (drug concentration inhibiting 90% of parasite's activity) of P. aeruginosa and 2 times lower than that of S. aureus [117]. Therefore, this MBG was considered a promising material for bone regeneration applications.

Acknowledgement The authors would like to acknowledge the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 643050, project “HyMedPoly”. Funding This work was supported by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska Curie [grant number 643050] project “HyMedPoly”. References [1] L.L. Hench, R.J. Splinter, W.C. Allen, T.K. Greenlee, Bonding mechanisms at the interface of ceramic prosthetic materials, J. Biomed. Mater. Res. 5 (1971) 117–141, http://dx.doi.org/10.1002/jbm.820050611. [2] L.L. Hench, Opening paper 2015 — some comments on bioglass: four eras of discovery and development, Biomed. Glass. 1 (2015) 1–11, http://dx.doi.org/10. 1515/bglass-2015-0001. [3] A. Hoppe, B. Sarker, R. Detsch, N. Hild, D. Mohn, W.J. Stark, et al., In vitro reactivity of Sr-containing bioactive glass (type 1393) nanoparticles, J. Non-Cryst. Solids 387 (2014) 41–46, http://dx.doi.org/10.1016/j.jnoncrysol.2013.12.010. [4] D. Zhang, O. Leppäranta, E. Munukka, H. Ylänen, M.K. Viljanen, E. Eerola, et al., Antibacterial effects and dissolution behavior of six bioactive glasses, J. Biomed. Mater. Res. A 93 (2010) 475–483, http://dx.doi.org/10.1002/jbm.a.32564. [5] M. Brink, T. Turunen, R.P. Happonen, A. Yli-Urpo, Compositional dependence of bioactivity of glasses in the system Na2O-K2O-MgO-CaO-B2O3-P2O5-SiO2, J. Biomed. Mater. Res. 37 (1997) 114–121, http://dx.doi.org/10.1002/(SICI)10974636(199710)37:1<114::AID-JBM14>3.3.CO;2-7. [6] O. Lepparanta, M. Vaahtio, T. Peltola, D. Zhang, L. Hupa, M. Hupa, et al., Antibacterial effect of bioactive glasses on clinically important anaerobic bacteria in vitro, J. Mater. Sci. Mater. Med. 19 (2008) 547–551, http://dx.doi.org/10. 1007/s10856-007-3018-5. [7] E. Munukka, O. Leppäranta, M. Korkeamäki, M. Vaahtio, T. Peltola, D. Zhang, et al., Bactericidal effects of bioactive glasses on clinically important aerobic bacteria, J. Mater. Sci. Mater. Med. 19 (2008) 27–32, http://dx.doi.org/10.1007/ s10856-007-3143-1. [8] L. Hupa, Melt-derived bioactive glasses, Bioact. Glas. Mater. Prop. Appl. 2011, pp. 3–28, , http://dx.doi.org/10.1016/B978-1-84569-768-6.50001-6. [9] R.F. Brown, M.N. Rahaman, A.B. Dwilewicz, W. Huang, D.E. Day, Y. Li, et al., Effect of borate glass composition on its conversion to hydroxyapatite and on the proliferation of MC3T3-E1 cells, J. Biomed. Mater. Res. A 88 (2009) 392–400, http://dx.doi.org/10.1002/jbm.a.31679. [10] E.A. Abou Neel, D.M. Pickup, S.P. Valappil, R.J. Newport, J.C. Knowles, Bioactive functional materials: a perspective on phosphate-based glasses, J. Mater. Chem. 19 (2009) 690–701, http://dx.doi.org/10.1039/b810675d. [11] A. Hoppe, N.S. Guldal, A.R. Boccaccini, A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics, Biomaterials 32 (2011) 2757–2774, http://dx.doi.org/10.1016/j.biomaterials.2011.01.004. [12] M. Cerruti, G. Magnacca, C. Morterra, Characterization of sol–gel bioglasses with the use of simple model systems: a surface-chemistry approach, J. Mater. Chem. (2003) 1279–1286, http://dx.doi.org/10.1039/b300961k. [13] R. Li, A.E. Clark, L.L. Hench, An investigation of bioactive glass powders by sol-gel processing, J. Appl. Biomater. 2 (1991) 231–239, http://dx.doi.org/10.1002/jab. 770020403. [14] B. Lei, X. Chen, Y. Wang, N. Zhao, G. Miao, Z. Li, et al., Fabrication of porous bioactive glass particles by one step sintering, Mater. Lett. 64 (2010) 2293–2295, http://dx.doi.org/10.1016/j.matlet.2010.07.066. [15] C. Brinker, G. Scherer, Sol-gel science: the physics and chemistry of sol-gel processing, Adv. Mater. 3 (1990) 912, http://dx.doi.org/10.1186/1471-2105-8-444. [16] I. Izquierdo-Barba, D. Arcos, Y. Sakamoto, O. Terasaki, A. Lopez-Noriega, M. Vallet-Regi, High-performance mesoporous bioceramics mimicking bone mineralization, Chem. Mater. 20 (2008) 3191–3198, http://dx.doi.org/10.1021/

3. Summary and outlook BGs are being used in bone regeneration applications as fillers in composites [129], as scaffolds for bone tissue engineering [72,77,130] and as coatings of implants [131]. The failure of implants may happen due to bacterial colonization or infections [38]. These failures are mostly solved by the administration of systemic antibiotics to the patient. This solution can lead to allergic reactions, microbial flora depletion and bacterial resistance. Due to these limitations of antibiotics, the modification of biomaterials with alternative antibacterial agents [132] is being intensively investigated. In this perspective, bioactive and soluble glasses are capable of controlled and sustained release of antimicrobial ions (e.g. Ag, Cu, Zn, Ce and Ga) and thus have the potential to allow localized antimicrobial treatments which are advantageous compared to systemic antibiotic delivery systems. Osteogenesis and angiogenesis properties are also promoted with the release of some of the therapeutic ions, e.g. Cu, Zn, Ce and Ga [11,37,102,116,120]. In low concentrations silver has no toxicity effect to human cells, and it can also give antibacterial, osteoconductivity and bone bonding properties to BGs [81–85].Copper ion is widely used due to its vascularization/angiogenesis stimulation properties [133]. Zinc is a cofactor in metabolic processes in bone, articular tissues and immune system functions [110,134,135]. Bone formation and mineralization are stimulated by activating aminoacyltRNA synthetase in osteoblastic cells via the zinc doping of BGs [116]. Cerium has been shown to enhance the proliferation, differentiation and mineralization of primary osteoblasts [136]. Besides promoting osteogenesis, cerium incorporated materials have demonstrated 104

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

cm800172x. [17] C. Wu, J. Chang, Y. Xiao, Mesoporous bioactive glasses as drug delivery and bone tissue regeneration platforms, Ther. Deliv. 2 (2011) 1189–1198, http://dx.doi. org/10.4155/tde.11.84. [18] D. Arcos, A. López-Noriega, E. Ruiz-Hernández, O. Terasaki, M. Vallet-Regí, Ordered mesoporous microspheres for bone grafting and drug delivery, Chem. Mater. 21 (2009) 1000–1009, http://dx.doi.org/10.1021/cm801649z. [19] W. Xia, J. Chang, Well-ordered mesoporous bioactive glasses (MBG): a promising bioactive drug delivery system, J. Control. Release 110 (2006) 522–530, http:// dx.doi.org/10.1016/j.jconrel.2005.11.002. [20] X. Yan, C. Yu, X. Zhou, J. Tang, D. Zhao, Highly ordered mesoporous bioactive glasses with superior in vitro bone-forming bioactivities, Angew. Chem. Int. Ed. 43 (2004) 5980–5984, http://dx.doi.org/10.1002/anie.200460598. [21] L. Zhao, X. Yan, X. Zhou, L. Zhou, H. Wang, J. Tang, et al., Mesoporous bioactive glasses for controlled drug release, Microporous Mesoporous Mater. 109 (2008) 210–215, http://dx.doi.org/10.1016/j.micromeso.2007.04.041. [22] V. Mouriño, A.R. Boccaccini, Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds, J. R. Soc. Interface 7 (2010) 209–227, http://dx.doi.org/10.1098/rsif.2009.0379. [23] Y. Zhu, Y. Zhang, C. Wu, Y. Fang, J. Yang, S. Wang, The effect of zirconium incorporation on the physiochemical and biological properties of mesoporous bioactive glasses scaffolds, Microporous Mesoporous Mater. 143 (2011) 311–319, http://dx.doi.org/10.1016/j.micromeso.2011.03.007. [24] X. Yan, X. Huang, C. Yu, H. Deng, Y. Wang, Z. Zhang, et al., The in-vitro bioactivity of mesoporous bioactive glasses, Biomaterials 27 (2006) 3396–3403, http://dx. doi.org/10.1016/j.biomaterials.2006.01.043. [25] E. Leonova, I. Izquierdo-Barba, D. Arcos, A. López-Noriega, N. Hedin, M. ValletRegí, et al., Multinuclear solid-state NMR studies of ordered mesoporous bioactive glasses, J. Phys. Chem. C 112 (2008) 5552–5562, http://dx.doi.org/10.1021/ jp7107973. [26] A. García, M. Cicuéndez, I. Izquierdo-Barba, D. Arcos, M. Vallet-Regí, Essential role of calcium phosphate heterogeneities in 2D-hexagonal and 3D-cubic SiO2 − CaO − P2O5 mesoporous bioactive glasses, Chem. Mater. 21 (2009) 5474–5484, http://dx.doi.org/10.1021/cm9022776. [27] M. Alcaide, P. Portoles, A. Lopez-Noriega, D. Arcos, M. Vallet-Regi, M.T. Portoles, Interaction of an ordered mesoporous bioactive glass with osteoblasts, fibroblasts and lymphocytes, demonstrating its biocompatibility as a potential bone graft material, Acta Biomater. 6 (2010) 892–899, http://dx.doi.org/10.1016/j.actbio. 2009.09.008. [28] D. Arcos, M. Vallet-Regi, Sol-gel silica-based biomaterials and bone tissue regeneration, Acta Biomater. 6 (2010) 2874–2888, http://dx.doi.org/10.1016/j. actbio.2010.02.012. [29] W. Xia, J. Chang, Preparation, in vitro bioactivity and drug release property of well-ordered mesoporous 58S bioactive glass, J. Non-Cryst. Solids 354 (2008) 1338–1341, http://dx.doi.org/10.1016/j.jnoncrysol.2006.10.084. [30] X. Li, X. Wang, D. He, J. Shi, Synthesis and characterization of mesoporous CaO–MO–SiO2–P2O5 (M = Mg, Zn, Cu) bioactive glasses/composites, J. Mater. Chem. 18 (2008) 4103, http://dx.doi.org/10.1039/b805114c. [31] X. Wu, J. Wei, X. Lu, Y. Lv, F. Chen, Y. Zhang, et al., Chemical characteristics and hemostatic performances of ordered mesoporous calcium-doped silica xerogels, Biomed. Mater. 5 (2010) 35006, http://dx.doi.org/10.1088/1748-6041/5/3/ 035006. [32] A. Hoppe, A.R. Boccaccini, Biological impact of bioactive glasses and their dissolution products, Front. Oral Biol. 17 (2015) 22–32, http://dx.doi.org/10.1159/ 000381690. [33] V. Mourino, J.P. Cattalini, A.R. Boccaccini, Metallic ions as therapeutic agents in tissue engineering scaffolds: an overview of their biological applications and strategies for new developments, J. R. Soc. Interface 9 (2012) 401–419, http://dx. doi.org/10.1098/rsif.2011.0611. [34] C. Wu, J. Chang, Mesoporous bioactive glasses: structure characteristics, drug/ growth factor delivery and bone regeneration application, Interface Focus 2 (2012) 292–306, http://dx.doi.org/10.1098/rsfs.2011.0121. [35] C. Wu, J. Chang, Multifunctional mesoporous bioactive glasses for effective delivery of therapeutic ions and drug/growth factors, J. Control. Release 193 (2014) 282–295, http://dx.doi.org/10.1016/j.jconrel.2014.04.026. [36] C. Wu, W. Fan, Y. Zhu, M. Gelinsky, J. Chang, G. Cuniberti, et al., Multifunctional magnetic mesoporous bioactive glass scaffolds with a hierarchical pore structure, Acta Biomater. 7 (2011) 3563–3572, http://dx.doi.org/10.1016/j.actbio.2011.06. 028. [37] A.J. Salinas, M. Vallet-Regí, Glasses in bone regeneration: a multiscale issue, J. Non-Cryst. Solids 432 (2016) 9–14, http://dx.doi.org/10.1016/j.jnoncrysol.2015. 03.025. [38] D. Campoccia, L. Montanaro, C.R. Arciola, The significance of infection related to orthopedic devices and issues of antibiotic resistance, Biomaterials 27 (2006) 2331–2339, http://dx.doi.org/10.1016/j.biomaterials.2005.11.044. [39] A.M. Mulligan, M. Wilson, J.C. Knowles, The effect of increasing copper content in phosphate-based glasses on biofilms of Streptococcus sanguis, Biomaterials 24 (2003) 1797–1807, http://dx.doi.org/10.1016/S0142-9612(02)00577-X. [40] T.N. Kim, Q.L. Feng, J.O. Kim, J. Wu, H. Wang, G.C. Chen, et al., Antimicrobial effects of metal ions (Ag+, Cu2 +, Zn2 +) in hydroxyapatite, J. Mater. Sci. Mater. Med. 9 (1998) 129–134, http://dx.doi.org/10.1023/A:1008811501734. [41] J.C. Wataha, P.E. Lockwood, A. Schedle, Effect of silver, copper, mercury, and nickel ions on cellular proliferation during extended, low-dose exposures, J. Biomed. Mater. Res. 52 (2000) 360–364, http://dx.doi.org/10.1002/10974636(200011)52:2<360::AID-JBM16>3.0.CO;2-B. [42] O. Yamamoto, J. Sawai, T. Sasamoto, Change in antibacterial characteristics with

[43]

[44]

[45]

[46]

[47] [48]

[49]

[50]

[51] [52]

[53]

[54]

[55]

[56] [57]

[58] [59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

105

doping amount of ZnO in MgO-ZnO solid solution, Int. J. Inorg. Mater. 2 (2000) 451–454, http://dx.doi.org/10.1016/S1466-6049(00)00045-3. P. Stoor, E. Söderling, J.I. Salonen, Antibacterial effects of a bioactive glass paste on oral microorganisms, Acta Odontol. Scand. 56 (1998) 161–165, http://dx.doi. org/10.1080/000163598422901. P. Stoor, E. Söderling, R. Grénman, Bioactive glass S53P4 in repair of septal perforations and its interactions with the respiratory infection-associated microorganisms Heamophilus influenzae and Streptococcus pneumoniae, J. Biomed. Mater. Res. 58 (2001) 113–120, http://dx.doi.org/10.1002/1097-4636(2001) 58:1<113::AID-JBM170>3.0.CO;2-V. P. Stoor, E. Söderling, R. Grenman, Interactions between the bioactive glass S53P4 and the atrophic rhinitis-associated microorganism Klebsiella ozaenae, J. Biomed. Mater. Res. 48 (1999) 869–874, http://dx.doi.org/10.1002/(SICI)10974636(1999)48:6<869::AID-JBM16>3.0.CO;2-6. M.G. Newman, S.S. Socransky, E.D. Savitt, D.A. Propas, A. Crawford, Studies of the microbiology of periodontosis, J. Periodontol. 47 (1976) 373–379, http://dx.doi. org/10.1902/jop.1976.47.7.373. J. Slots, The predominant cultivable organisms in juvenile periodontitis, Scand. J. Dent. Res. 84 (1976) 1–10. J. Slots, The predominant cultivable microflora of advanced periodontitis, Scand. J. Dent. Res. 4 (1977) 114–121, http://dx.doi.org/10.1111/j.1600-0722.1977. tb00541.x. C.A. Spiegel, S.E. Hayduk, G.E. Minah, G.N. Krywolap, Black-pigmented Bacteroides from clinically characterized periodontal sites, J. Periodontal Res. 14 (1979) 376–382, http://dx.doi.org/10.1111/j.1600-0765.1979.tb00234.x. A.C.R. Tanner, C. Haffer, G.T. Bratthall, R.A. Visconti, S.S. Socransky, A study of the bacteria associated with advancing periodontitis in man, J. Clin. Periodontol. 6 (1979) 278–307, http://dx.doi.org/10.1111/j.1600-051X.1979.tb01931.x. J.M. Tanzer, J. Livingston, A.M. Thompson, The microbiology of primary dental caries in humans, J. Dent. Educ. 65 (2001) 1028–1037. L. Drago, D. Romano, E. De Vecchi, C. Vassena, N. Logoluso, R. Mattina, et al., Bioactive glass BAG-S53P4 for the adjunctive treatment of chronic osteomyelitis of the long bones: an in vitro and prospective clinical study, BMC Infect. Dis. 13 (2013) 584, http://dx.doi.org/10.1186/1471-2334-13-584. J. McAndrew, C. Efrimescu, E. Sheehan, D. Niall, Through the looking glass; bioactive glass S53P4 (BonAlive®) in the treatment of chronic osteomyelitis, Ir. J. Med. Sci. 182 (2013) 509–511, http://dx.doi.org/10.1007/s11845-012-0895-5. C.L. Romano, N. Logoluso, E. Meani, D. Romano, E. De Vecchi, C. Vassena, et al., A comparative study of the use of bioactive glass S53P4 and antibiotic-loaded calcium-based bone substitutes in the treatment of chronic osteomyelitis: a retrospective comparative study, Bone Jt J 96 (B) (2014) 845–850, http://dx.doi.org/ 10.1302/0301-620X.96B6.33014. N.A.P. Van Gestel, J. Geurts, D.J.W. Hulsen, B. Van Rietbergen, S. Hofmann, J.J. Arts, Clinical applications of S53P4 bioactive glass in bone healing and osteomyelitic treatment: a literature review, Biomed. Res. Int. 2015 (2015), http:// dx.doi.org/10.1155/2015/684826. J.H. Calhoun, M.M. Manring, M. Shirtliff, Osteomyelitis of the long bones, Semin. Plast. Surg. 23 (2009) 59–72, http://dx.doi.org/10.1055/s-0029-1214158. J. Geurts, J.J. Chris Arts, G.H.I.M. Walenkamp, Bone graft substitutes in active or suspected infection. Contra-indicated or not? Injury 42 (2011), http://dx.doi.org/ 10.1016/j.injury.2011.06.189. G. Walenkamp, Small PMMA beads improve gentamicin release, Acta Orthop. Scand. 60 (1989) 668–669, http://dx.doi.org/10.3109/17453678909149599. T.F. Calton, T.K. Fehring, W.L. Griffin, Bone loss associated with the use of spacer blocks in infected total knee arthroplasty, Clin. Orthop. Relat. Res. (1997) 148–154. N.C. Lindfors, Bioactive glass S53P4 as a bone graft substitute in the treatment of osteomyelitis, Bioact. Glas. Mater. Prop. Appl. 2011, pp. 209–216, , http://dx.doi. org/10.1016/B978-1-84569-768-6.50009-0. R. Lakshminarayanan, V.A. Barathi, M. Venkatesh, N.K. Verma, S. Liu, X.J. Loh, R.W. Beuerman, Membrane selectivity of cationic polyamides and rational design of proteolyticresistant antimicrobial peptides, Invest. Ophthalmol. Vis. Sci. 57 (2016) 333. R. Lakshminarayanan, R. Sridhar, X.J. Loh, M. Nandhakumar, V.A. Barathi, M. Kalaipriya, et al., Interaction of gelatin with polyenes modulates antifungal activity and biocompatibility of electrospun fiber mats, Int. J. Nanomedicine 9 (2014) 2439–2458, http://dx.doi.org/10.2147/IJN.S58487. M. Ignatova, I. Rashkov, N. Manolova, М. Ignatova, I. Rashkov, N. Manolova, Drug-loaded electrospun materials in wound-dressing applications and in local cancer treatment, Expert Opin. Drug Deliv. 10 (2013) 469–483, http://dx.doi.org/ 10.1517/17425247.2013.758103. S. Puttipipatkhachorn, J. Nunthanid, K. Yamamoto, G.E. Peck, Drug physical state and drug-polymer interaction on drug release from chitosan matrix films, J. Control. Release 75 (2001) 143–153, http://dx.doi.org/10.1016/S0168-3659(01) 00389-3. D. Kai, G. Jin, M.P. Prabhakaran, S. Ramakrishna, Electrospun synthetic and natural nanofibers for regenerative medicine and stem cells, Biotechnol. J. 8 (2013) 59–72, http://dx.doi.org/10.1002/biot.201200249. C. Dhand, M. Venkatesh, V.A. Barathi, S. Harini, S. Bairagi, E. Goh Tze Leng, et al., Bio-inspired crosslinking and matrix-drug interactions for advanced wound dressings with long-term antimicrobial activity, Biomaterials 138 (2017) 153–168, http://dx.doi.org/10.1016/j.biomaterials.2017.05.043. J. Min, R.D. Braatz, P.T. Hammond, Tunable staged release of therapeutics from layer-by-layer coatings with clay interlayer barrier, Biomaterials 35 (2014) 2507–2517, http://dx.doi.org/10.1016/j.biomaterials.2013.12.009. X. Zhu, Loh X. Jun, Layer-by-layer assemblies for antibacterial applications,

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

Biomater. Sci. 3 (2015) 1505–1518, http://dx.doi.org/10.1039/C5BM00307E. [69] P. Gentile, M.E. Frongia, M. Cardellach, C.A. Miller, G.P. Stafford, G.J. Leggett, et al., Functionalised nanoscale coatings using layer-by-layer assembly for imparting antibacterial properties to polylactide-co-glycolide surfaces, Acta Biomater. 21 (2015) 35–43, http://dx.doi.org/10.1016/j.actbio.2015.04.009. [70] M.N. Rahaman, D.E. Day, B. Sonny Bal, Q. Fu, S.B. Jung, L.F. Bonewald, et al., Bioactive glass in tissue engineering, Acta Biomater. 7 (2011) 2355–2373, http:// dx.doi.org/10.1016/j.actbio.2011.03.016. [71] V. Mouriño, A.R. Boccaccini, Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds, J. R. Soc. Interface 7 (2010) 209–227, http://dx.doi.org/10.1098/rsif.2009.0379. [72] J. Hum, A.R. Boccaccini, Bioactive glasses as carriers for bioactive molecules and therapeutic drugs: a review, J. Mater. Sci. Mater. Med. 23 (2012) 2317–2333, http://dx.doi.org/10.1007/s10856-012-4580-z. [73] J. Ye, J. He, C. Wang, K. Yao, Z. Gou, Copper-containing mesoporous bioactive glass coatings on orbital implants for improving drug delivery capacity and antibacterial activity, Biotechnol. Lett. 36 (2014) 961–968, http://dx.doi.org/10. 1007/s10529-014-1465-x. [74] C. Wu, Y. Zhou, W. Fan, P. Han, J. Chang, J. Yuen, et al., Hypoxia-mimicking mesoporous bioactive glass scaffolds with controllable cobalt ion release for bone tissue engineering, Biomaterials 33 (2012) 2076–2085, http://dx.doi.org/10. 1016/j.biomaterials.2011.11.042. [75] J.-H. Lee, A. El-Fiqi, N. Mandakhbayar, H.-H. Lee, H.-W. Kim, Drug/ion co-delivery multi-functional nanocarrier to regenerate infected tissue defect, Biomaterials 142 (2017) 62–76, http://dx.doi.org/10.1016/j.biomaterials.2017. 07.014. [76] S. Di Nunzio, C. Vitale Brovarone, S. Spriano, D. Milanese, E. Verné, V. Bergo, et al., Silver containing bioactive glasses prepared by molten salt ion-exchange, J. Eur. Ceram. Soc. 24 (2004) 2935–2942, http://dx.doi.org/10.1016/j. jeurceramsoc.2003.11.010. [77] P.J. Newby, R. El-Gendy, J. Kirkham, X.B. Yang, I.D. Thompson, A.R. Boccaccini, Ag-doped 45S5 Bioglass®-based bone scaffolds by molten salt ion exchange: processing and characterisation, J. Mater. Sci. Mater. Med. 22 (2011) 557–569, http://dx.doi.org/10.1007/s10856-011-4240-8. [78] A.B.G. Lansdown, Silver in health care: antimicrobial effects and safety in use, Curr. Probl. Dermatol. 33 (2006) 17–34, http://dx.doi.org/10.1159/000093928. [79] W.K. Jung, H.C. Koo, K.W. Kim, S. Shin, S.H. Kim, Y.H. Park, Antibacterial activity and mechanism of action of the silver ion in Staphylococcus aureus and Escherichia coli, Appl. Environ. Microbiol. 74 (2008) 2171–2178, http://dx.doi.org/10.1128/ AEM.02001-07. [80] S. Pal, Y.K. Tak, J.M. Song, Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the Gram-negative bacterium Escherichia coli, J. Biol. Chem. 290 (2015) 1712–1720, http://dx.doi.org/10.1128/ AEM.02218-06. [81] M. Bellantone, N.J. Coleman, L.L. Hench, Bacteriostatic action of a novel fourcomponent bioactive glass, J. Biomed. Mater. Res. 51 (2000) 484–490, http://dx. doi.org/10.1002/1097-4636(20000905)51:3<484::AID-JBM24>3.0.CO;2-4. [82] M. Bellantone, H.D. Williams, L.L. Hench, Broad-spectrum bactericidal activity of Ag2O-doped bioactive glass, Antimicrob. Agents Chemother. 46 (2002) 1940–1945, http://dx.doi.org/10.1128/AAC.46.6.1940-1945.2002. [83] T.J. Berger, J.A. Spadaro, S.E. Chapin, R.O. Becker, Electrically generated silver ions: quantitative effects on bacterial and mammalian cells, Antimicrob. Agents Chemother. 9 (1976) 357–358, http://dx.doi.org/10.1128/AAC.9.2.357. [84] M.A. Hollinger, Toxicological aspects of topical silver pharmaceuticals, Crit. Rev. Toxicol. 26 (1996) 255–260, http://dx.doi.org/10.3109/10408449609012524. [85] J.L. Clement, P.S. Jarrett, Antibacterial silver, Metal-Based Drugs 1 (1994) 467–482, http://dx.doi.org/10.1155/MBD.1994.467. [86] O. Gordon, T.V. Slenters, P.S. Brunetto, A.E. Villaruz, D.E. Sturdevant, M. Otto, et al., Silver coordination polymers for prevention of implant infection: thiol interaction, impact on respiratory chain enzymes, and hydroxyl radical induction, Antimicrob. Agents Chemother. 54 (2010) 4208–4218, http://dx.doi.org/10. 1128/AAC.01830-09. [87] E. Vernè, S. Di Nunzio, M. Bosetti, P. Appendino, C. Vitale Brovarone, G. Maina, et al., Surface characterization of silver-doped bioactive glass, Biomaterials 26 (2005) 5111–5119, http://dx.doi.org/10.1016/j.biomaterials.2005.01.038. [88] P. Saravanapavan, J.E. Gough, J.R. Jones, L.L. Hench, Antimicrobial macroporous gel-glasses: dissolution and cytotoxicity, Annu. Meet. Int. Soc. Ceram. Med. 254–256 2004, pp. 1087–1090, , http://dx.doi.org/10.4028/www.scientific.net/ KEM.254-256.1087. [89] J.J. Blaker, S.N. Nazhat, A.R. Boccaccini, Development and characterisation of silver-doped bioactive glass-coated sutures for tissue engineering and wound healing applications, Biomaterials 25 (2004) 1319–1329, http://dx.doi.org/10. 1016/j.biomaterials.2003.08.007. [90] J. Pratten, S.N. Nazhat, J.J. Blaker, A.R. Boccaccini, In vitro attachment of Staphylococcus epidermidis to surgical sutures with and without Ag-containing bioactive glass coating, J. Biomater. Appl. 19 (2004) 47–57, http://dx.doi.org/10. 1177/0885328204043200. [91] J.R. Jones, L.M. Ehrenfried, P. Saravanapavan, L.L. Hench, Controlling ion release from bioactive glass foam scaffolds with antibacterial properties, J. Mater. Sci. Mater. Med. 17 (2006) 989–996, http://dx.doi.org/10.1007/s10856-006-0434-x. [92] A. Balamurugan, G. Balossier, D. Laurent-Maquin, S. Pina, A.H.S. Rebelo, J. Faure, et al., An in vitro biological and anti-bacterial study on a sol–gel derived silverincorporated bioglass system, Dent. Mater. 24 (2008) 1343–1351, http://dx.doi. org/10.1016/j.dental.2008.02.015. [93] N. Nezafati, F. Moztarzadeh, S. Hesaraki, Surface reactivity and in vitro biological evaluation of sol gel derived silver/calcium silicophosphate bioactive glass,

[94]

[95]

[96]

[97]

[98]

[99]

[100]

[101]

[102]

[103]

[104]

[105]

[106]

[107]

[108]

[109]

[110]

[111]

[112]

[113]

[114]

[115]

[116]

106

Biotechnol. Bioprocess Eng. 17 (2012) 746–754, http://dx.doi.org/10.1007/ s12257-012-0046-x. N. Gargiulo, A.M. Cusano, F. Causa, D. Caputo, P.A. Netti, Silver-containing mesoporous bioactive glass with improved antibacterial properties, J. Mater. Sci. Mater. Med. 24 (2013) 2129–2135, http://dx.doi.org/10.1007/s10856-0134968-4. H. Palza, B. Escobar, J. Bejarano, D. Bravo, M. Diaz-Dosque, J. Perez, Designing antimicrobial bioactive glass materials with embedded metal ions synthesized by the sol-gel method, Mater. Sci. Eng. C 33 (2013) 3795–3801, http://dx.doi.org/10. 1016/j.msec.2013.05.012. F. Baino, S. Fiorilli, R. Mortera, B. Onida, E. Saino, L. Visai, et al., Mesoporous bioactive glass as a multifunctional system for bone regeneration and controlled drug release, J. Appl. Biomater. Biomech. 10 (2012) 12–21, http://dx.doi.org/10. 5301/JABB.2012.9036. R. Phetnin, S.T. Rattanachan, Preparation and antibacterial property on silver incorporated mesoporous bioactive glass microspheres, J. Sol-Gel Sci. Technol. 75 (2015) 279–290, http://dx.doi.org/10.1007/s10971-015-3697-1. H. Zhu, C. Hu, F. Zhang, X. Feng, J. Li, T. Liu, et al., Preparation and antibacterial property of silver-containing mesoporous 58S bioactive glass, Mater. Sci. Eng. C 42 (2014) 22–30, http://dx.doi.org/10.1016/j.msec.2014.05.004. M.L. Turski, D.J. Thiele, New roles for copper metabolism in cell proliferation, signaling, and disease, J. Biol. Chem. 284 (2009) 717–721, http://dx.doi.org/10. 1074/jbc.R800055200. J.F. Collins, J.R. Prohaska, M.D. Knutson, Metabolic crossroads of iron and copper, Nutr. Rev. 68 (2010) 133–147, http://dx.doi.org/10.1111/j.1753-4887.2010. 00271.x. C. Wu, Y. Zhou, M. Xu, P. Han, L. Chen, J. Chang, et al., Copper-containing mesoporous bioactive glass scaffolds with multifunctional properties of angiogenesis capacity, osteostimulation and antibacterial activity, Biomaterials 34 (2013) 422–433, http://dx.doi.org/10.1016/j.biomaterials.2012.09.066. J. Li, D. Zhai, F. Lv, Q. Yu, H. Ma, J. Yin, et al., Preparation of copper-containing bioactive glass/eggshell membrane nanocomposites for improving angiogenesis, antibacterial activity and wound healing, Acta Biomater. 36 (2016) 254–266, http://dx.doi.org/10.1016/j.actbio.2016.03.011. A.A. Gorustovich, J.A. Roether, A.R. Boccaccini, Effect of bioactive glasses on angiogenesis: a review of in vitro and in vivo evidences, Tissue Eng. B Rev. 16 (2010) 199–207, http://dx.doi.org/10.1089/ten.teb.2009.0416. A. Aguirre, A. González, M. Navarro, Ó. Castaño, J.A. Planell, E. Engel, Control of microenvironmental cues with a smart biomaterial composite promotes endothelial progenitor cell angiogenesis, Eur. Cell. Mater. 24 (2012) 90–106 (doi:vol024a07 [pii]). J. Grzybowski, M.K. Janiak, E. Oidak, K. Lasocki, J. Wrembel-Wargocka, A. Cheda, et al., New cytokine dressings. II. Stimulation of oxidative burst in leucocytes in vitro and reduction of viable bacteria within an infected wound, Int. J. Pharm. 184 (1999) 179–187, http://dx.doi.org/10.1016/S0378-5173(99)00064-2. X. Wang, F. Cheng, J. Liu, J.-H. Smått, D. Gepperth, M. Lastusaari, et al., Biocomposites of copper-containing mesoporous bioactive glass and nanofibrillated cellulose: biocompatibility and angiogenic promotion in chronic wound healing application, Acta Biomater. 46 (2016) 286–298, http://dx.doi.org/10. 1016/j.actbio.2016.09.021. A. Bari, N. Bloise, S. Fiorilli, G. Novajra, M. Vallet-Regí, G. Bruni, et al., Coppercontaining mesoporous bioactive glass nanoparticles as multifunctional agent for bone regeneration, Acta Biomater. (2017) 1–12, http://dx.doi.org/10.1016/j. actbio.2017.04.012. L. Fong, K. Tan, C. Tran, J. Cool, M.A. Scherer, R. Elovaris, et al., Interaction of dietary zinc and intracellular binding protein metallothionein in postnatal bone growth, Bone 44 (2009) 1151–1162, http://dx.doi.org/10.1016/j.bone.2009.02. 011. A. Grandjean-Laquerriere, P. Laquerriere, E. Jallot, J.M. Nedelec, M. Guenounou, D. Laurent-Maquin, et al., Influence of the zinc concentration of sol-gel derived zinc substituted hydroxyapatite on cytokine production by human monocytes in vitro, Biomaterials 27 (2006) 3195–3200, http://dx.doi.org/10.1016/j. biomaterials.2006.01.024. P. Balasubramanian, L.A. Strobel, U. Kneser, A.R. Boccaccini, Zinc-containing bioactive glasses for bone regeneration, dental and orthopedic applications, Biomed. Glass. 1 (2015) 51–69, http://dx.doi.org/10.1515/bglass-2015-0006. R. Pasqualini, C.F. Barbas, W. Arap, Vessel maneuvers: zinc fingers promote angiogenesis, Nat. Med. 8 (2002) 1353–1354, http://dx.doi.org/10.1038/nm12021353. C. Lang, C. Murgia, M. Leong, L.-W. Tan, G. Perozzi, D. Knight, et al., Anti-inflammatory effects of zinc and alterations in zinc transporter mRNA in mouse models of allergic inflammation, Am. J. Phys. Lung Cell. Mol. Phys. 292 (2007) L577–84, http://dx.doi.org/10.1152/ajplung.00280.2006. Y.H. Cho, S.J. Lee, J.Y. Lee, S.W. Kim, C.B. Lee, W.Y. Lee, et al., Antibacterial effect of intraprostatic zinc injection in a rat model of chronic bacterial prostatitis, Int. J. Antimicrob. Agents 19 (2002) 576–582, http://dx.doi.org/10.1016/S09248579(02)00115-2. A.B.G. Lansdown, U. Mirastschijski, N. Stubbs, E. Scanlon, M.S. Agren, Zinc in wound healing: theoretical, experimental, and clinical aspects, Wound Repair Regen. 15 (2007) 2–16, http://dx.doi.org/10.1111/j.1524-475X.2006.00179.x. T.N. Phan, T. Buckner, J. Sheng, J.D. Baldeck, R.E. Marquis, Physiologic actions of zinc related to inhibition of acid and alkali production by oral streptococci in suspensions and biofilms, Oral Microbiol. Immunol. 19 (2004) 31–38, http://dx. doi.org/10.1046/j.0902-0055.2003.00109.x. S. Sanchez-Salcedo, S. Shruti, A.J. Salinas, G. Malavasi, L. Menabue, M. ValletRegi, In vitro antibacterial capacity and cytocompatibility of SiO2-CaO-P2O5 meso-

Materials Science & Engineering C 83 (2018) 99–107

S. Kaya et al.

[117]

[118]

[119]

[120]

[121] [122]

[123]

[124] [125]

[126]

[127]

[128]

[129] G. Chouzouri, M. Xanthos, In vitro bioactivity and degradation of polycaprolactone composites containing silicate fillers, Acta Biomater. 3 (2007) 745–756, http://dx.doi.org/10.1016/j.actbio.2007.01.005. [130] Q. Fu, E. Saiz, M.N. Rahaman, A.P. Tomsia, Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives, Mater. Sci. Eng. C Mater. Biol. Appl. 31 (2012) 1245–1256, http://dx.doi.org/10.1016/j.msec.2011. 04.022.Bioactive. [131] M. Mehdipour, A. Afshar, M. Mohebali, Electrophoretic deposition of bioactive glass coating on 316L stainless steel and electrochemical behavior study, Appl. Surf. Sci. 258 (2012) 9832–9839, http://dx.doi.org/10.1016/j.apsusc.2012.06. 038. [132] T.N. Kim, Q.L. Feng, J.O. Kim, J. Wu, H. Wang, G.C. Chen, et al., Antimicrobial effects of metal ions (Ag+, Cu2 +, Zn2 +) in hydroxyapatite, J. Mater. Sci. Mater. Med. 9 (1998) 129–134, http://dx.doi.org/10.1023/A:1008811501734. [133] N. Kong, K. Lin, H. Li, J. Chang, Synergy effects of copper and silicon ions on stimulation of vascularization by copper-doped calcium silicate, J. Mater. Chem. B 2 (2014) 1100, http://dx.doi.org/10.1039/c3tb21529f. [134] P.D. Saltman, L.G. Strause, The role of trace minerals in osteoporosis, J. Am. Coll. Nutr. 12 (1993) 384–389, http://dx.doi.org/10.1080/07315724.1993.10718327. [135] M. Yazar, S. Sarban, A. Kocyigit, U.E. Isikan, Synovial fluid and plasma selenium, copper, zinc, and iron concentrations in patients with rheumatoid arthritis and osteoarthritis, Biol. Trace Elem. Res. 106 (2005) 123–132, http://dx.doi.org/10. 1385/BTER:106:2:123. [136] G. Zhou, G. Gu, Y. Li, Q. Zhang, W. Wang, S. Wang, et al., Effects of cerium oxide nanoparticles on the proliferation, differentiation, and mineralization function of primary osteoblasts in vitro, Biol. Trace Elem. Res. 153 (2013) 411–418, http:// dx.doi.org/10.1007/s12011-013-9655-2. [137] R.P. Warrell, R.S. Bockman, C.J. Coonley, M. Isaacs, H. Staszewski, Gallium nitrate inhibits calcium resorption from bone and is effective treatment for cancer-related hypercalcemia, J. Clin. Invest. 73 (1984) 1487–1490, http://dx.doi.org/10.1172/ JCI111353. [138] P. Melnikov, A.R. Teixeira, A. Malzac, B. Coelho M de, Gallium-containing hydroxyapatite for potential use in orthopedics, Mater. Chem. Phys. 117 (2009) 86–90, http://dx.doi.org/10.1016/j.matchemphys.2009.05.046. [139] D.M. Pickup, R.M. Moss, D. Qiu, R.J. Newport, S.P. Valappil, J.C. Knowles, et al., Structural characterization by X-ray methods of novel antimicrobial galliumdoped phosphate-based glasses, J. Chem. Phys. 130 (2009), http://dx.doi.org/10. 1063/1.3076057. [140] R.J. Martens, N.A. Miller, N.D. Cohen, J.R. Harrington, L.R. Bernstein, Chemoprophylactic antimicrobial activity of gallium maltolate against intracellular Rhodococcus equi, J. Equine. Vet. Sci. 27 (2007) 341–345, http://dx.doi. org/10.1016/j.jevs.2007.06.007.

macroporous glass scaffolds enriched with ZnO, J. Mater. Chem. B 2 (2014) 4836–4847, http://dx.doi.org/10.1039/c4tb00403e. I. Atkinson, E.M. Anghel, L. Predoana, O.C. Mocioiu, L. Jecu, I. Raut, et al., Influence of ZnO addition on the structural, in vitro behavior and antimicrobial activity of sol–gel derived CaO–P2O5–SiO2 bioactive glasses, Ceram. Int. 42 (2016) 3033–3045, http://dx.doi.org/10.1016/j.ceramint.2015.10.090. T. Kokubo, H. Takadama, How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27 (15) (2006) 2907, http://dx.doi.org/10.1016/j.biomaterials. 2006.01.017. C. Leonelli, G. Lusvardi, G. Malavasi, L. Menabue, M. Tonelli, Synthesis and characterization of cerium-doped glasses and in vitro evaluation of bioactivity, J. Non-Cryst. Solids 316 (2003) 198–216, http://dx.doi.org/10.1016/S00223093(02)01628-9. Y.F. Goh, A.Z. Alshemary, M. Akram, M.R. Abdul Kadir, R. Hussain, In-vitro characterization of antibacterial bioactive glass containing ceria, Ceram. Int. 40 (2014) 729–737, http://dx.doi.org/10.1016/j.ceramint.2013.06.062. J.M. Sobek, D.E. Talburt, Effects of the rare earth cerium on Escherichia coli, Am Soc Microbiol 95 (1968) 47–51. P. Collery, B. Keppler, C. Madoulet, B. Desoize, Gallium in cancer treatment, Crit. Rev. Oncol. Hematol. 42 (2002) 283–296, http://dx.doi.org/10.1016/S10408428(01)00225-6. E. Zeimaran, S. Pourshahrestani, B. Pingguan-Murphy, N.A. Kadri, H.A. Rothan, R. Yusof, et al., Fabrication and characterization of poly(octanediol citrate)/gallium-containing bioglass microcomposite scaffolds, J. Mater. Sci. 50 (2015) 2189–2201, http://dx.doi.org/10.1007/s10853-014-8782-2. L.R. Bernstein, Mechanisms of therapeutic activity for gallium, Pharmacol. Rev. 50 (1998) 665–682. Y. Kaneko, M. Thoendel, O. Olakanmi, B.E. Britigan, P.K. Singh, The transition metal gallium disrupts Pseudomonas aeruginosa iron metabolism and has antimicrobial and antibiofilm activity, J. Clin. Invest. 117 (2007) 877–888, http://dx. doi.org/10.1172/JCI30783. S. Pourshahrestani, E. Zeimaran, N. Adib Kadri, N. Gargiulo, S. Samuel, S.V. Naveen, et al., Gallium-containing mesoporous bioactive glass with potent hemostatic activity and antibacterial efficacy, J. Mater. Chem. B 4 (2016) 71–86, http://dx.doi.org/10.1039/C5TB02062J. S. Sanchez-salcedo, A. Salinas, M. Vallet-Regi, Development of mesoporous bioactive glasses able to release antibacterial Ga3 + ions, Conf. Abstr. 10th World Biomater. Congr., Front. Bioeng. Biotechnol. 2016, pp. 5–7, , http://dx.doi.org/10. 3389/conf.FBIOE.2016.01.01476. F. Minandri, C. Bonchi, E. Frangipani, F. Imperi, P. Visca, Promises and failures of gallium as an antibacterial agent, Future Microbiol. 9 (2014) 379–397, http://dx. doi.org/10.2217/fmb.14.3.

107