- Email: [email protected]
pH and ORP control systems
nomically remove oxides and smut from aluminum and many of its alloys. Clepo 503-ALN may be used successfully in both preplate and prepaint applications. It effectively conditions the aluminum substrate to readily accept zincate or chromate treatments.
operating costs, shortens installation schedules, and insures the highest quality paint finish and equipment standards. Circle 408 on the reader service card
pH and ORP Control Dynatec Systems Inc. Burlington, N. J.
Systems
Circle 410 on the reader service card
Dynatec Systems’ pH and ORP control systems for the control and treatment of wastewater from a variety of metalworking operations have flow capacities from 5 to 200 gpm, with larger systems available as custom designs. The systems are designed to be self regulating, eliminating risks from potential problems such as probe exposure. The systems can be configured to adjust pH in one or two directions, and can be combined with ORP control on the same skid. A number of options are available, such as alarm and shut-off capabilities, and recording devices. Circle 409 on the reader service card
??Iron
??Reduced
??Zinc
costs
Phosphates Phosphates ??Multi-Metal Cleaners Cleaners
??Non-Chrome
Seals
Chromate Conversion Heatbath Corp. Springfield, Mass.
Nonchromated Aluminum DeoxidaWDesmutter Frederick Gumm Chemical Co. Keamy, N. J. Clepo 503-ALN is a nonchromated, highly acidic liquid deoxidant/desmutter, formulated to efficiently and eco-
Coating
Alchrome 16 is a high-performance chromate that is applied to a coating weight of 30 to 100 mg/ft*. It significantly improves both corrosion resistance and adhesive properties and is free of ferricyanides. Alchrome 16 is applied by spray or immersion using existing equipment, It is highly stable and easy to control and its unique formula needs no separate nitric acid additions. Alchrome 16 is suitable to moderate to high volume applications
Operating
??System
Review Service ??Education ??On-Going
TEXO HAS THE SOLUTION TEXO has the Metal Finishing know-how to solve your pretreatment problems. From top notch products, to an experienced technical staff, to knowledgeable field service representatives, TEXO has you covered from top to bottom, whatever your pretreatment need.
Quality Metal Finishing, Plastics Finishing, Water Treatment, and maintenance chemicals for Industry
KORFORATION Industrial Division 2828 Highland Avenue Cincinnati, OH 452 12
Circle 059 on reader information card
METAL FINISHING
??
DECEMBER
1996
Circle 023 on reader information card
61
operating costs, shortens installation schedules, and insures the highest quality paint finish and equipment standards. Circle 408 on the reader service card
pH and ORP Control Dynatec Systems Inc. Burlington, N. J.
Systems
Circle 410 on the reader service card
Dynatec Systems’ pH and ORP control systems for the control and treatment of wastewater from a variety of metalworking operations have flow capacities from 5 to 200 gpm, with larger systems available as custom designs. The systems are designed to be self regulating, eliminating risks from potential problems such as probe exposure. The systems can be configured to adjust pH in one or two directions, and can be combined with ORP control on the same skid. A number of options are available, such as alarm and shut-off capabilities, and recording devices. Circle 409 on the reader service card
??Iron
??Reduced
??Zinc
costs
Phosphates Phosphates ??Multi-Metal Cleaners Cleaners
??Non-Chrome
Seals
Chromate Conversion Heatbath Corp. Springfield, Mass.
Nonchromated Aluminum DeoxidaWDesmutter Frederick Gumm Chemical Co. Keamy, N. J. Clepo 503-ALN is a nonchromated, highly acidic liquid deoxidant/desmutter, formulated to efficiently and eco-
Coating
Alchrome 16 is a high-performance chromate that is applied to a coating weight of 30 to 100 mg/ft*. It significantly improves both corrosion resistance and adhesive properties and is free of ferricyanides. Alchrome 16 is applied by spray or immersion using existing equipment, It is highly stable and easy to control and its unique formula needs no separate nitric acid additions. Alchrome 16 is suitable to moderate to high volume applications
Operating
??System
Review Service ??Education ??On-Going
TEXO HAS THE SOLUTION TEXO has the Metal Finishing know-how to solve your pretreatment problems. From top notch products, to an experienced technical staff, to knowledgeable field service representatives, TEXO has you covered from top to bottom, whatever your pretreatment need.
Quality Metal Finishing, Plastics Finishing, Water Treatment, and maintenance chemicals for Industry
KORFORATION Industrial Division 2828 Highland Avenue Cincinnati, OH 452 12
Circle 059 on reader information card
METAL FINISHING
??
DECEMBER
1996
Circle 023 on reader information card
61