- Email: [email protected]
Retraction notice to Effect of electroplastic rolling on deformability, mechanical property and microstructure evolution of Ti-6Al-4V alloy strip
Materials Characterization 132 (2017) 467
Contents lists available at ScienceDirect
Materials Characterization journal homepage: www.elsevier.com/locate/matchar
Retraction notice to Effect of electroplastic rolling on deformability, mechanical property and microstructure evolution of Ti-6Al-4V alloy strip
MARK
⁎
Xiaoxin Yea,b, Zion Thtsec, Guoyi Tanga,b, , Guolin Songa a b c
Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, PR China Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, PR China College of Engineering, The University of Georgia, Athens, GA 30602, USA
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have reused figures and text that have already appeared in their previous articles. Particularly, Figure 5 duplicates panels from figure 3 of Reference [1], figure 6 of Reference [2] and figure 6 of Reference [3]. Figures 6-7 duplicate panels from figures 9-10 of Reference [4] and figure 7 of Reference [2]. Figure 8 duplicates panels from figure 4 of Reference [4], figure 12 of Reference [1] and figure 12 of Reference [5]. Figure 9 duplicates panels from figure 13 of Reference [1]. In addition, the Introduction duplicates text from Reference [6]. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
Journal records indicate that confirmation of the submission and publication of the article was sent to the first author’s email address, in addition to an email that used the corresponding author’s name ([email protected]). The corresponding author and the first author wish to mention that the co-author Zion T.H. Tse was not involved in the preparation and handling of this article. He was not informed about the publication or granted the use of his name and affiliation in the publication. References [1] J Alloys Compd 616 (2014) 173-183, http://dx.doi.org/10.1016/j.jallcom.2014.07. 143. [2] J Mech Behav Biomed Mater 40 (2014) 287-296, http://dx.doi.org/10.1016/j. jmbbm.2014.08.022. [3] Surf Coat Tech 258 (2014) 467-484, http://dx.doi.org/10.1016/j.surfcoat.2014.08. 052. [4] J Mater Res 29 (2014) 1500-1512, http://dx.doi.org/10.1557/jmr.2014.171. [5] Appl Phys A 117 (2014) 2251-2264, http://dx.doi.org/10.1007/s00339-014-8655-1. [6] Adv Eng Mater 17 (2015) 995-1007, http://dx.doi.org/10.1002/adem.201400273.
DOI of original article: http://dx.doi.org/10.1016/j.matchar.2014.10.026 ⁎ Corresponding author at: Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, PR China E-mail addresses: [email protected] (X. Ye), [email protected] (G. Tang). http://dx.doi.org/10.1016/j.matchar.2017.09.008
1044-5803/
Contents lists available at ScienceDirect
Materials Characterization journal homepage: www.elsevier.com/locate/matchar
Retraction notice to Effect of electroplastic rolling on deformability, mechanical property and microstructure evolution of Ti-6Al-4V alloy strip
MARK
⁎
Xiaoxin Yea,b, Zion Thtsec, Guoyi Tanga,b, , Guolin Songa a b c
Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, PR China Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, PR China College of Engineering, The University of Georgia, Athens, GA 30602, USA
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have reused figures and text that have already appeared in their previous articles. Particularly, Figure 5 duplicates panels from figure 3 of Reference [1], figure 6 of Reference [2] and figure 6 of Reference [3]. Figures 6-7 duplicate panels from figures 9-10 of Reference [4] and figure 7 of Reference [2]. Figure 8 duplicates panels from figure 4 of Reference [4], figure 12 of Reference [1] and figure 12 of Reference [5]. Figure 9 duplicates panels from figure 13 of Reference [1]. In addition, the Introduction duplicates text from Reference [6]. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
Journal records indicate that confirmation of the submission and publication of the article was sent to the first author’s email address, in addition to an email that used the corresponding author’s name ([email protected]). The corresponding author and the first author wish to mention that the co-author Zion T.H. Tse was not involved in the preparation and handling of this article. He was not informed about the publication or granted the use of his name and affiliation in the publication. References [1] J Alloys Compd 616 (2014) 173-183, http://dx.doi.org/10.1016/j.jallcom.2014.07. 143. [2] J Mech Behav Biomed Mater 40 (2014) 287-296, http://dx.doi.org/10.1016/j. jmbbm.2014.08.022. [3] Surf Coat Tech 258 (2014) 467-484, http://dx.doi.org/10.1016/j.surfcoat.2014.08. 052. [4] J Mater Res 29 (2014) 1500-1512, http://dx.doi.org/10.1557/jmr.2014.171. [5] Appl Phys A 117 (2014) 2251-2264, http://dx.doi.org/10.1007/s00339-014-8655-1. [6] Adv Eng Mater 17 (2015) 995-1007, http://dx.doi.org/10.1002/adem.201400273.
DOI of original article: http://dx.doi.org/10.1016/j.matchar.2014.10.026 ⁎ Corresponding author at: Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, PR China E-mail addresses: [email protected] (X. Ye), [email protected] (G. Tang). http://dx.doi.org/10.1016/j.matchar.2017.09.008
1044-5803/