- Email: [email protected]
Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by spark plasma sintering’ [Mater. Sci. Eng. A 606 (2014) 68–73]
Materials Science & Engineering A 627 (2015) 399
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to 'Microstructures and mechanical properties of Nb/Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by spark plasma sintering’ [Mater. Sci. Eng. A 606 (2014) 68–73] Bowen Xiong, Changchun Cai, Zhenjun Wang National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang 330063, PR China
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief of 'Materials Science & Engineering A'. The article self-plagiarises the two articles listed below, published by the same authors in the Journal of Alloys and Compounds (JALCOM).
Microstructures and room temperature fracture toughness of Nb/Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by
spark plasma sintering, Bowen Xiong , Changchun Cai, Zhenjun Wang, Journal of Alloys and Compounds 604 (2014) 211–216 The DOI of this paper is: http://dx.doi.org/10.1016/j.jallcom.2014.03.136. Microstructures of Nb/Nb5Si3 composites and it alloyed with W, Mo and W–Mo fabricated by spark plasma sintering, Bowen Xiong , Changchun Cai , Zhenjun Wang, Journal of Alloys and Compounds 583 (2014) 574–577 The DOI of this paper is: http://dx.doi.org/10.1016/j.jallcom.2013.08.151.
DOI of original article: http://dx.doi.org/10.1016/j.msea.2014.03.085 http://dx.doi.org/10.1016/j.msea.2015.02.001 0921-5093/& 2015 Elsevier B.V. All rights reserved.
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to 'Microstructures and mechanical properties of Nb/Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by spark plasma sintering’ [Mater. Sci. Eng. A 606 (2014) 68–73] Bowen Xiong, Changchun Cai, Zhenjun Wang National Defence Key Discipline Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang 330063, PR China
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief of 'Materials Science & Engineering A'. The article self-plagiarises the two articles listed below, published by the same authors in the Journal of Alloys and Compounds (JALCOM).
Microstructures and room temperature fracture toughness of Nb/Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by
spark plasma sintering, Bowen Xiong , Changchun Cai, Zhenjun Wang, Journal of Alloys and Compounds 604 (2014) 211–216 The DOI of this paper is: http://dx.doi.org/10.1016/j.jallcom.2014.03.136. Microstructures of Nb/Nb5Si3 composites and it alloyed with W, Mo and W–Mo fabricated by spark plasma sintering, Bowen Xiong , Changchun Cai , Zhenjun Wang, Journal of Alloys and Compounds 583 (2014) 574–577 The DOI of this paper is: http://dx.doi.org/10.1016/j.jallcom.2013.08.151.
DOI of original article: http://dx.doi.org/10.1016/j.msea.2014.03.085 http://dx.doi.org/10.1016/j.msea.2015.02.001 0921-5093/& 2015 Elsevier B.V. All rights reserved.