- Email: [email protected]
Slip type pipe joint
EVENTS / PATENTS
EVENTS CALENDAR 4-7 September 2007 Aberdeen, UK Contact: Reed Exhibitions Ltd, Tel: +44 20 8271 2142, Fax: +44 20 8334 0740, Web: www.offshore-europe.co.uk.
Contact: Turbomachinery Laboratory, Texas A&M University System, College Station, TX 77843-3254, USA. Tel: +1 979 845 7417, Fax: +1 979 845 9500, Email: [email protected], Web: http://turbolab.tamu.edu.
Tel:+33 5 49 496566 or +33 5 49 496500, Fax : +33 5 49 49 65 04 Email: [email protected], Web: http://www-lms.univ-poitiers.fr/tribo/jt_ tribo2007/aindex.htm.
4-7 September 2007
18-20 September 2007
Engineered solutions for Fluid Sealing Short course
Offshore Europe
34th Leeds/Lyon Symposium on Tribology Tribological Contacts and Component Life
Lyon, France Contact: Professor Ton Lubrecht, LMCR, UMR CNRS INSA 5514, Batiment J. d’Alembert, INSA de Lyon, 20 avenue Albert Einstein, 69621 Villeurbanne cedex, France. E-mail: [email protected], Web: http://leeds-lyon.insa-lyon.fr.
10-12 September 2007
International Conference on Compressors and their Systems
London, UK Contact: IMechE, 1 Birdcage Walk, London, SW1H 9JJ, UK, Tel: +44 20 7973 1294, Fax: +44 20 7222 9881, E: [email protected] Web: www.imeche.org.uk.
10-13 September 2007
36th Turbomachinery Symposium Houston, Texas, USA.
Slip type pipe joint Applicant: JTL Australia Pty Ltd, Australia A pipe joining or repair method is described for use with low cost irrigation piping. An insert is used in the end of each of the pipes to be joined. The insert has barbs to resist pullout and a sealing head with a pair of O-rings on the outside diameter. A joining collar is slipped over the O-rings of each pipe to make the join and is located by collets clamped by a nut to the respective pipes. A specific benefit is that the joining sleeve is effective over a wide range of axial positions. Patent number: WO 2007/045033 Inventor: G.M. Phillipps Publication date: 26 April 2007
Energy Rubber Group Educational Symposium and Fall Technical Meeting
8-9 October 2007
Galveston, Texas, USA. Energy Rubber Group Contact: www.energyrubbergroup.org
Detroit, MI, USA. Contact: Seminars for Engineers 188 Route 10, Suite 307 East Hanover, NJ 07936 USA, Tel: +1.877.755.2272, Fax: +1.973.884.1699, Email: [email protected]
25-26 September 2007
16-18 October 2007
19th International Conference on Fluid Sealing Poitiers, France Contact: BHR Group Ltd, The Fluid Engineering Centre,Cranfield, Bedford, MK43 0AJ, UK, Tel: +44 234 750422, Fax: +44 234 750074, Email: [email protected], Web: www.bhrgroup.com.
27 September 2007
The Role and Effect of Surfaces in Dynamic Sealing EDF / University of Poitiers Workshop
Poitiers, France, Contact: Laboratoire de Mécanique des Solides, SP2MI, Bd Pierre et Marie Curie, BP 30179, 86962 Futuroscope Chasseneuil Cedex, France,
Tank piston seal and stabilizing system Applicant/Inventor: M.F. Birsner (USA) This patent is concerned with the system for emptying bulk road tankers that are used to carry viscous products such as chocolate or peanut butter. Discharge is achieved by pressurizing a piston in the tank which forces the product out of the discharge valve on the rear of the trailer. The seal includes a freefloating block inside the seal and grooves in the inner lower part of the hollow seal. The
172nd Technical Meeting & IRC 2007
Cleveland, Ohio, USA Contact: Rubber Division ACS, PO Box 499, Akron, OH 44309-0499, USA. Tel: +1 330 972 7814, Email: [email protected], Web: http://rubber.org.
17-18 October 2007
Valve World Asia Conference & Expo 2007
Shanghai, China Contact: Valve World Asia 2007, PO Box 396, NL-7200 AJ Zutphen, The Netherlands, Tel: +31 575 585 270, Fax: +31 575 511 099, E-mail: [email protected], Web: www.valve-world.net.
block and grooves keep the upper, outer part of the seal from deforming away from the inner surface of the cylinder that facilitates complete discharging and wiping of the material from the cylinder tank. The tensioning mechanism of the seal is a T-ring that easily slides on the rear surface of the piston head. In order to stabilize the movement of the piston head down the cylinder, clockwise and counterclockwise springs are provided for the stabilizing shoes. Patent number: WO 2007/044006 Publication date: 19 April 2007
Dielectric insulation seal for a vacuum tube Applicant: Areva T&D SA, France This invention relates to a seal for use with medium and high voltage vacuum tubes. The internal and external contact surfaces smooth and ensure high dielectric performance. The seal also facilitates easy mounting and removal of the tube. Patent number: WO 2007/045635 Inventors: J.-F. Tortorici and O. Gascard Publication date: 26 April 2007 16
Sealing Technology
The piston seal and stabilizing ring described in WO 2007/044006 is used for discharging viscous liquids from road tankers.
August 2007
EVENTS CALENDAR 4-7 September 2007 Aberdeen, UK Contact: Reed Exhibitions Ltd, Tel: +44 20 8271 2142, Fax: +44 20 8334 0740, Web: www.offshore-europe.co.uk.
Contact: Turbomachinery Laboratory, Texas A&M University System, College Station, TX 77843-3254, USA. Tel: +1 979 845 7417, Fax: +1 979 845 9500, Email: [email protected], Web: http://turbolab.tamu.edu.
Tel:+33 5 49 496566 or +33 5 49 496500, Fax : +33 5 49 49 65 04 Email: [email protected], Web: http://www-lms.univ-poitiers.fr/tribo/jt_ tribo2007/aindex.htm.
4-7 September 2007
18-20 September 2007
Engineered solutions for Fluid Sealing Short course
Offshore Europe
34th Leeds/Lyon Symposium on Tribology Tribological Contacts and Component Life
Lyon, France Contact: Professor Ton Lubrecht, LMCR, UMR CNRS INSA 5514, Batiment J. d’Alembert, INSA de Lyon, 20 avenue Albert Einstein, 69621 Villeurbanne cedex, France. E-mail: [email protected], Web: http://leeds-lyon.insa-lyon.fr.
10-12 September 2007
International Conference on Compressors and their Systems
London, UK Contact: IMechE, 1 Birdcage Walk, London, SW1H 9JJ, UK, Tel: +44 20 7973 1294, Fax: +44 20 7222 9881, E: [email protected] Web: www.imeche.org.uk.
10-13 September 2007
36th Turbomachinery Symposium Houston, Texas, USA.
Slip type pipe joint Applicant: JTL Australia Pty Ltd, Australia A pipe joining or repair method is described for use with low cost irrigation piping. An insert is used in the end of each of the pipes to be joined. The insert has barbs to resist pullout and a sealing head with a pair of O-rings on the outside diameter. A joining collar is slipped over the O-rings of each pipe to make the join and is located by collets clamped by a nut to the respective pipes. A specific benefit is that the joining sleeve is effective over a wide range of axial positions. Patent number: WO 2007/045033 Inventor: G.M. Phillipps Publication date: 26 April 2007
Energy Rubber Group Educational Symposium and Fall Technical Meeting
8-9 October 2007
Galveston, Texas, USA. Energy Rubber Group Contact: www.energyrubbergroup.org
Detroit, MI, USA. Contact: Seminars for Engineers 188 Route 10, Suite 307 East Hanover, NJ 07936 USA, Tel: +1.877.755.2272, Fax: +1.973.884.1699, Email: [email protected]
25-26 September 2007
16-18 October 2007
19th International Conference on Fluid Sealing Poitiers, France Contact: BHR Group Ltd, The Fluid Engineering Centre,Cranfield, Bedford, MK43 0AJ, UK, Tel: +44 234 750422, Fax: +44 234 750074, Email: [email protected], Web: www.bhrgroup.com.
27 September 2007
The Role and Effect of Surfaces in Dynamic Sealing EDF / University of Poitiers Workshop
Poitiers, France, Contact: Laboratoire de Mécanique des Solides, SP2MI, Bd Pierre et Marie Curie, BP 30179, 86962 Futuroscope Chasseneuil Cedex, France,
Tank piston seal and stabilizing system Applicant/Inventor: M.F. Birsner (USA) This patent is concerned with the system for emptying bulk road tankers that are used to carry viscous products such as chocolate or peanut butter. Discharge is achieved by pressurizing a piston in the tank which forces the product out of the discharge valve on the rear of the trailer. The seal includes a freefloating block inside the seal and grooves in the inner lower part of the hollow seal. The
172nd Technical Meeting & IRC 2007
Cleveland, Ohio, USA Contact: Rubber Division ACS, PO Box 499, Akron, OH 44309-0499, USA. Tel: +1 330 972 7814, Email: [email protected], Web: http://rubber.org.
17-18 October 2007
Valve World Asia Conference & Expo 2007
Shanghai, China Contact: Valve World Asia 2007, PO Box 396, NL-7200 AJ Zutphen, The Netherlands, Tel: +31 575 585 270, Fax: +31 575 511 099, E-mail: [email protected], Web: www.valve-world.net.
block and grooves keep the upper, outer part of the seal from deforming away from the inner surface of the cylinder that facilitates complete discharging and wiping of the material from the cylinder tank. The tensioning mechanism of the seal is a T-ring that easily slides on the rear surface of the piston head. In order to stabilize the movement of the piston head down the cylinder, clockwise and counterclockwise springs are provided for the stabilizing shoes. Patent number: WO 2007/044006 Publication date: 19 April 2007
Dielectric insulation seal for a vacuum tube Applicant: Areva T&D SA, France This invention relates to a seal for use with medium and high voltage vacuum tubes. The internal and external contact surfaces smooth and ensure high dielectric performance. The seal also facilitates easy mounting and removal of the tube. Patent number: WO 2007/045635 Inventors: J.-F. Tortorici and O. Gascard Publication date: 26 April 2007 16
Sealing Technology
The piston seal and stabilizing ring described in WO 2007/044006 is used for discharging viscous liquids from road tankers.
August 2007