Some aspects of liquid flow through fan spray nozzles

NOTICE The Protection

OF

of Gas Plant

MEETING

and Equipment

from

Corrosion

A joint symposium sponsored by the Institution of Gas Engineers, the Society of Chemical Industry Corrosion Group and the College of Advanced on 22nd and 23rd September,

Further details may be obtained Advanced

Technology,

Technology,

Birmingham, is being held in Birmingham

1960. tiom

Mr. A. S. Blower,

Suffolk Street, Binningham

Department

of Chemistry,

College of

I.

Errata N. DOMBROWSKI, D. HASSON and Sci.1960 12 35.

b. E. WARD:

Some aspects of liquid flow through fan spray nozzles.

Chem.

En@&

Au paragraphe (c) du Resume la derniere ligne devrait etre : “ . . . fonction de (I’,)!/ 2/q.

. la param&re d’epaisseur est seulement une

Die letzte Zeile des Absatzes (c) der Zusammenfassung sollte heissen Parameter nur eine Funktion (P,,)l/s/+

: “ Bei hohen Spritzdrucken ist der Dicken-

On p. 43 the third line from the bottom of the left hand column should read “ (see Plates 22,23) the ordinate should read l/z, cm- l. The caption to Fig. 12 should include : x kerosene n alcohol

. . . . “. In Fig. 11, o water.

On p. 44 the eighteenth line from the bottom of the left hand column should read “ at two surface tension levels of 30 and 70 dyn/cm.” The caption to Fig. 14 should read “ The effect of viscosity and pressure on the thickness parao m 70 dyn/cm.” meter K. x - 36 dyn/cm On p. 46 the second line of the left hand column should read “ 25-43’7 dyn/cm.” On pp. 45-47 the ordinates in Figs. 15, 16, 17 and 18 should read FE In the caption to Fig. 19, “ [7 alcohol ” should read “ A alcohol.”

152

x 104.