Spill containment mat

Spill containment mat

tern that is installed within the automatic spraying enclosure prior to the filter media and exhaust chamber. Circle 425 on the reader service card o...

113KB Sizes 0 Downloads 89 Views

tern that is installed within the automatic spraying enclosure prior to the filter media and exhaust chamber. Circle 425 on the reader service card

one-piece molded body assuring maximum protection should a spill occur. A poly tray inside the cabinet catches incidental leaks and is removable for easy cleaning.

Spill Containment Mat Jomac Inc. Warrington, Pa.

stage air end, which produces up to 20% more air per horsepower, achieving optimum efficiency at low rotation speeds. The GS and HS Series include 11 models from 400 to 600 hp with capacities from 1,295 to 3,308 cfm and pressures from 50 to 205 psig.

Jomac Products has announced the availabilty of its new spill containment mat designed for temporarily sealing floor drains for protection from chemical and liquid spills. The drain cover mat has been developed for temporary use on floors until spills can be properly cleaned up and disposed of in compliance with environmental regulations.

Circle 426 on the reader service card Circle 427 on the reader service card

Circle 426 on the reader service card

Salt Bath Nitriding Kolene Corp. Detroit

Corrosives Storage Cabinet Justrite Mfg. Co. Des Plains, 111.

Air Compressors Kaeser Compressors Fredericksburg, Va.

The Model 24040 Countertop Cabinet is designed for corrosives storage. The polyethylene cabinet features a

Kaeser’s GS an HS Series Rotary Screw Air Compressors are equipped with a large SIGMA profile single-

The SBN salt bath nitriding process provides an alternative to surface treatments such as gas nitriding, induction hardening, and hard chrome and elec-

CtPW ChromicAcid Purification

0 Lower Power Use ?? Fewer Rejects ?? Shorter Plating Time ?? Stabilized Bath ?? Reduced Liability 1 Bath Life Extended Virtually Forever 1 Minimal Operating Requirements

REASCO Modular ion Exchange

Heavy Metal Recovery Rinse Water Recovery ?? Bath Purification ?? Effluent Polishing ?? D.I. Water ?? ??

=oor Mixmation

On Design,

iales, Or Possible

?epmentation, Contact:

?O. Box 297, Arvada, Colorado 80001-0297 ‘HONE: (303) 292-5702 FAX: (303) 2924717 Circle 080 METAL FINISHING

??

on

reader information card

MAY 1997

Cirde

033

on reader information card 83