- Email: [email protected]
Sputtering apparatus
least a machined edge having a bordering margin; the improvement comprising only the machined edge being primed with a cured, coalesced powder coating so that the remainder of the SMC exterior surface is primerless.
Electrodeposition Composition
Photoresist
U.S. Patent 5,624,761. Apr. 29> 1997 K. Naruse ef a/., assignors to Kansai Paint Co. Ltd., Hyogo-ken, Japan
A positive anionic electrodeposition photoresist composition comprising, as a main component, a water-dispersible resin composition obtained by neutralizing, wilh a base. an iadmixture comprising an acrylic resin. a vinylphenol resin, and an ester.
Thermosetting Composition
Powder Coating
U.S. Patent $625,026.
Apr. 29, 1997 R.6. Barbee and B.S. Phillips, assignors lo Eastman Chemical Co., Kingsport Term.
A semicrystalline polyester consisting essentially of diol and/or trio] and dicarhoxylic acid residues.
Electrical Connector Metal Plating
An abrasive article comprising a suhstrate having a first major surface bearing an abrasive layer and a second major surface having a layer of pressure-,sensitive adhesive and a protective liner covering the layer of pressure-sensitive adhesive, the liner having a perimeter coterminous with the perimeter of the substlrate in which the liner has a lift flap secured thereto with a greater bond strength therebetween than the bond strength develolped between the liner and the pressure-sensitive adhesive. the lift flap not extending beyond the perimeter of the liner and having a free portion accessible to finger grip.
Formed by
U.S. Patent 5,626,463. May 6, 1997 T Naifoh, assignor to The Whitaker Corp., Wilmington, Del.
An electrical connector comprising a dielectric housing made oF a heat-resistant plastic that can accept metal plating having a roughened surface covered with a metal layer, a conductor pattern formed by photolithography on the metal layer. excess metal removed from the housing leaving the conductor pattern thereon in the form of closely spaced contact members, the housing including a contact section and a soldering section. with the contact members extending along one surface of the contact section and along one part of the soldering section including a side surface and a bottom surface of the soldering section, and the side surface of the soldering section having arcuate depressions along which the contact members extend.
Sputtering
Apparatus
U.S. Patent 5,626,727. May 6, 1997 H. Yamanishiet al., assrgnors lo Mafsushffa Electric Industrial Co. Ltd., Osaka-fu, Japan
A sputtering apparatus using a plurality of rectangular targets to form a thin film on a substrate comprising a plurality of magnets disposed along both srde edges of each target in such a manner that the polarities of adjacent magnets along the side edges of the target are opposite, and the polarities of’
Abrasive Articles U.S. Patent 5,626,639. May 6, 1997 W.8. King, assignor to 3M Co., St Paul, Minn
The fastest and easiest way to a better understanding of electroplating h@oducing the New StateoftheArt Produced by AESF and Desktop Dimensions Interactive, inc. Script by Frank Altmayer, Technical Director-AESF
Coverswhat you need to know about the process... Plating Solutions Role of Anodes Plating Equipment Preparing Metals for Plating Rectifiers plus...Exercises in Area& PlatinglimeCalculatian Basic Version- $195.00 +Perfornis Cyclic Corrosion Tests Q LowProfile Design for easy access <*Power AssistedCover
+ Programmable Controller with Touch Screen Display <*Available with full Humidity Control
@iJingleton
Manager’s Version- $595.00
Minimum systemrequirements..
486/Penfium
PC, Windows
95, 16mb
RAM,
CD-ROM
dhe.
sound
card
call for a FREEDemo CD-ROM!
407-281-6441 ask for Kristi DesktopDimensions Interactive,int. l-888-222-4DDi- www.ddiweb.tom
3280 W. 67tb Place, Cleveland, OH 44102 216/651-7800 0 2161651-4247 Circle 073 on reader information card METAL
FINISHING
l
JANUARY
1998
91
confronting each other across the target are opposite, the surfaces of at least two said targets being inclined to a
the magnets
surface smaller
of the substrate at an angle not than 30” and not larger than 60”.
Electroplating
Process
U.S. Patent 5,626,736. May 6, 1997 SM. Florio et al. assignors to Ship/ey Co. L.L.C., Marlborough, Mass.
Corrosion maybeeating youup. Corrosion-resistant Fibergrate fiberglass grating stands up to even the harshest corrosive environments. providing year5 of trouble-free service. Learn more about the advantages of Fibergrate ’ fiberglass grating
Kprb ~8ttd.,wtezz4 Dmal I, TX 75z4e2034 Phona: 800/5279049 l Fi Ix: 87zR5ls1550
G
information
card
Coating thickness gages for measuring non-magnetic coatings on steel...
A process for depositing metal on the walls of openings passing through a copper-clad nonmetallic planar substrate comprising forming a sacrificial coating over the copper cladding, without removing the sacrificial coating. providing a dispersion of carbonaceous particles in an aqueous medium and contacting the substrate having the openings with the dispersion to form a porous coating of the carbonaceous dispersion over the surfaces, of the suhstrate including the sacrificial cclating over the copper cladding, removing the carhonaceous coating from the copper cladding hy contacting with an etchant that dissolves the sacrificial coating preff:rentially to the copper cladding. and plating Imetal on at least those portions of the :,ubstrate coated with the carbonaceous coating from an electrolytic metal plating sl.)lution.
Multilayer
Coating
U.S. Patent 5,626,917. May 6, 1997 T: Brock and E. Wiiczek, assignors lo Herberts GmbH, Wupperlal, Gennany A process for the multilayer coating of a substrate by applying a base layer of an aqueous coating composition onto an optionally precoated substrate and suhsequently overcoating with ;I clear coating characterized in that the clear coating used contains at least one copolymer containing hydroxyl groups, one or more polyisocy;uates, and one or more solvc:nts
Base Paint for Coating PVC ON-MAONETlC COATINGS UCHAS PAINT. ENAMEL, PLATING,
Ideal for measuring small, hot or hard-to-reach surfaces
Made
Phone: 315-393-4450, FAX: 315-393-8471 Web: http:i/www.defelsko.com Circle 020 on reader
92
in U.S.A.
U.S. Patent 5626,958. May 6, 1997 8. D’Herbecourl and T Moulin. assignors to Elf Atochem S.A., Pans-/a-Defense, ,rrance A composition suitable fol coating polyvinyl chloride (PVC) articles being curable in an oven at a temperature hetween 20 and 80°C or under infrared at a surface temperature between SO and IW(’ comprising a vehicle of polyacrylate. epoxy resin. polyether, polyester, polycaprolactone. vinyl chloride polymers, or mixtures thereof: an ixcxyanate crosslinking agent; a solvent: and finely divided thermoplastic resin particles.
Multilayer Brass The information
Measure card
of Qualify
Coating Simulating
U.S. Patent 5,626,972. May 6, 1997 S.R. Moysan, 111and R. W Sugg, assignors to Baldwn Hardware Corp.. Reading. Pa.
METAL
FINISHING
l
JANUARY
1998
Electrodeposition Composition
Photoresist
U.S. Patent 5,624,761. Apr. 29> 1997 K. Naruse ef a/., assignors to Kansai Paint Co. Ltd., Hyogo-ken, Japan
A positive anionic electrodeposition photoresist composition comprising, as a main component, a water-dispersible resin composition obtained by neutralizing, wilh a base. an iadmixture comprising an acrylic resin. a vinylphenol resin, and an ester.
Thermosetting Composition
Powder Coating
U.S. Patent $625,026.
Apr. 29, 1997 R.6. Barbee and B.S. Phillips, assignors lo Eastman Chemical Co., Kingsport Term.
A semicrystalline polyester consisting essentially of diol and/or trio] and dicarhoxylic acid residues.
Electrical Connector Metal Plating
An abrasive article comprising a suhstrate having a first major surface bearing an abrasive layer and a second major surface having a layer of pressure-,sensitive adhesive and a protective liner covering the layer of pressure-sensitive adhesive, the liner having a perimeter coterminous with the perimeter of the substlrate in which the liner has a lift flap secured thereto with a greater bond strength therebetween than the bond strength develolped between the liner and the pressure-sensitive adhesive. the lift flap not extending beyond the perimeter of the liner and having a free portion accessible to finger grip.
Formed by
U.S. Patent 5,626,463. May 6, 1997 T Naifoh, assignor to The Whitaker Corp., Wilmington, Del.
An electrical connector comprising a dielectric housing made oF a heat-resistant plastic that can accept metal plating having a roughened surface covered with a metal layer, a conductor pattern formed by photolithography on the metal layer. excess metal removed from the housing leaving the conductor pattern thereon in the form of closely spaced contact members, the housing including a contact section and a soldering section. with the contact members extending along one surface of the contact section and along one part of the soldering section including a side surface and a bottom surface of the soldering section, and the side surface of the soldering section having arcuate depressions along which the contact members extend.
Sputtering
Apparatus
U.S. Patent 5,626,727. May 6, 1997 H. Yamanishiet al., assrgnors lo Mafsushffa Electric Industrial Co. Ltd., Osaka-fu, Japan
A sputtering apparatus using a plurality of rectangular targets to form a thin film on a substrate comprising a plurality of magnets disposed along both srde edges of each target in such a manner that the polarities of adjacent magnets along the side edges of the target are opposite, and the polarities of’
Abrasive Articles U.S. Patent 5,626,639. May 6, 1997 W.8. King, assignor to 3M Co., St Paul, Minn
The fastest and easiest way to a better understanding of electroplating h@oducing the New StateoftheArt Produced by AESF and Desktop Dimensions Interactive, inc. Script by Frank Altmayer, Technical Director-AESF
Coverswhat you need to know about the process... Plating Solutions Role of Anodes Plating Equipment Preparing Metals for Plating Rectifiers plus...Exercises in Area& PlatinglimeCalculatian Basic Version- $195.00 +Perfornis Cyclic Corrosion Tests Q LowProfile Design for easy access <*Power AssistedCover
+ Programmable Controller with Touch Screen Display <*Available with full Humidity Control
@iJingleton
Manager’s Version- $595.00
Minimum systemrequirements..
486/Penfium
PC, Windows
95, 16mb
RAM,
CD-ROM
dhe.
sound
card
call for a FREEDemo CD-ROM!
407-281-6441 ask for Kristi DesktopDimensions Interactive,int. l-888-222-4DDi- www.ddiweb.tom
3280 W. 67tb Place, Cleveland, OH 44102 216/651-7800 0 2161651-4247 Circle 073 on reader information card METAL
FINISHING
l
JANUARY
1998
91
confronting each other across the target are opposite, the surfaces of at least two said targets being inclined to a
the magnets
surface smaller
of the substrate at an angle not than 30” and not larger than 60”.
Electroplating
Process
U.S. Patent 5,626,736. May 6, 1997 SM. Florio et al. assignors to Ship/ey Co. L.L.C., Marlborough, Mass.
Corrosion maybeeating youup. Corrosion-resistant Fibergrate fiberglass grating stands up to even the harshest corrosive environments. providing year5 of trouble-free service. Learn more about the advantages of Fibergrate ’ fiberglass grating
Kprb ~8ttd.,wtezz4 Dmal I, TX 75z4e2034 Phona: 800/5279049 l Fi Ix: 87zR5ls1550
G
information
card
Coating thickness gages for measuring non-magnetic coatings on steel...
A process for depositing metal on the walls of openings passing through a copper-clad nonmetallic planar substrate comprising forming a sacrificial coating over the copper cladding, without removing the sacrificial coating. providing a dispersion of carbonaceous particles in an aqueous medium and contacting the substrate having the openings with the dispersion to form a porous coating of the carbonaceous dispersion over the surfaces, of the suhstrate including the sacrificial cclating over the copper cladding, removing the carhonaceous coating from the copper cladding hy contacting with an etchant that dissolves the sacrificial coating preff:rentially to the copper cladding. and plating Imetal on at least those portions of the :,ubstrate coated with the carbonaceous coating from an electrolytic metal plating sl.)lution.
Multilayer
Coating
U.S. Patent 5,626,917. May 6, 1997 T: Brock and E. Wiiczek, assignors lo Herberts GmbH, Wupperlal, Gennany A process for the multilayer coating of a substrate by applying a base layer of an aqueous coating composition onto an optionally precoated substrate and suhsequently overcoating with ;I clear coating characterized in that the clear coating used contains at least one copolymer containing hydroxyl groups, one or more polyisocy;uates, and one or more solvc:nts
Base Paint for Coating PVC ON-MAONETlC COATINGS UCHAS PAINT. ENAMEL, PLATING,
Ideal for measuring small, hot or hard-to-reach surfaces
Made
Phone: 315-393-4450, FAX: 315-393-8471 Web: http:i/www.defelsko.com Circle 020 on reader
92
in U.S.A.
U.S. Patent 5626,958. May 6, 1997 8. D’Herbecourl and T Moulin. assignors to Elf Atochem S.A., Pans-/a-Defense, ,rrance A composition suitable fol coating polyvinyl chloride (PVC) articles being curable in an oven at a temperature hetween 20 and 80°C or under infrared at a surface temperature between SO and IW(’ comprising a vehicle of polyacrylate. epoxy resin. polyether, polyester, polycaprolactone. vinyl chloride polymers, or mixtures thereof: an ixcxyanate crosslinking agent; a solvent: and finely divided thermoplastic resin particles.
Multilayer Brass The information
Measure card
of Qualify
Coating Simulating
U.S. Patent 5,626,972. May 6, 1997 S.R. Moysan, 111and R. W Sugg, assignors to Baldwn Hardware Corp.. Reading. Pa.
METAL
FINISHING
l
JANUARY
1998