- Email: [email protected]
Subject Index Volume 92
Materials Chemistry and Physics 92 (2005) 623–632
Subject Index of Volume 92 A. Oxides Electrical and magnetic properties of YBaCo4O7, 33 Absorption coefficient Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Accelerated aging and composting Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Acidity Structure and properties of Cr promoted VPO catalysts, 197 Activated carbon Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Activation energy Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Adsorption isotherms Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Adsorption layer thickness Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Al-based alloys Passivity and its breakdown in Al-based amorphous alloys, 348 Amorphous alloys Passivity and its breakdown in Al-based amorphous alloys, 348 Anatase nanocrystal Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Anatase TiO2 nanoparticles Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Anionic transport number Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Anodic deposition The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 Anodic oxide film Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Aqueous chemical solution deposition Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Arrhenius and Mott models Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Elsevier B.V. doi:10.1016/S0254-0584(05)00212-9
Artificial superlattices Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Atomic force microscope Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Atomic force microscopy Surface analysis of nanomachined films using atomic force microscopy, 379 Auger electron spectroscopy (AES) Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Average intercalation voltage Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 BaBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Bi3.5La0.5Ti3O12 thin films Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Bilayered materials Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Bi–Te–Se Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39 Bismuth titanate Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373
C. Electrical characterization Electrical and magnetic properties of YBaCo4O7, 33 C. Electrochemical techniques Electrical and magnetic properties of YBaCo4O7, 33 CaBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Calcium modified lead titanate Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Carbon nanofiber Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71
624
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Carbon nanotubes Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Carbon steel Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Carbon Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Carboxylic acid Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Catalyst Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Cation–anion–cation Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Cation–cation interactions Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 CdTe Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 CeO2 nanoparticles Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Ceramic coatings Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Ceramic fabrication Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Ceramics Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ce3 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Chemical reduction Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Chemical synthesis Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Coating multi-walled carbon nanotubes with metal sulfides, 159 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Growth of dendritic antimony nanocrystals at room temperature, 286 Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609
Chemisorption Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Citric acid Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 Close-spaced evaporation Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 CO catalytic activity A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Co films Interaction of Co thin films with SiO2: Effect of Co loading, 613 Co/ZrO2 oxide Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 Coatings Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Cobalt Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Composite electroplating The Ni–P–SiC composite produced by electro-codeposition, 146 Composites Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Computer modelling and simulation Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Conducting copolymers Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Conductive polymer Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Conductivity Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 4-Coordinated Ti ions on {1 0 1} surface Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Co-precipitation Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Co-Rh spinel coatings Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Corrosion inhibition Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Corrosion resistance Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Corrosion test Corrosion behaviour of titanium in non-aqueous solvents, 475
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Corrosion Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Cr promoter Structure and properties of Cr promoted VPO catalysts, 197 Crystal structure Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Crystallization Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Voiding behaviour and microstructure of a filled polyester film, 540 Crystallographic phase transformation Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Cyclic voltammetry The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 D. Magnetic properties Electrical and magnetic properties of YBaCo4O7, 33 D. Transport properties Electrical and magnetic properties of YBaCo4O7, 33 DCJTB Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Defect barriers (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Degradation Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 Dendrites Growth of dendritic antimony nanocrystals at room temperature, 286 Desorption Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Diamond Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152 Dielectric constant Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Dielectric loss Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Dielectric permittivity Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Dielectric properties Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373
625
Diffraction Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 Diffusion Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Dithiophosphonic acid derivatives An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Double glow Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 Electrical and sintering study Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303 Electrical properties Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Electrocatalysis Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Electrocatalysts Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Electrochemical behaviour Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Electrochemical impedance spectroscopy Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Electrochemical polymerization Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Electrochemical properties Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Electrochemical techniques Corrosion behaviour of titanium in non-aqueous solvents, 475 Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Electrochromic properties Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Electroluminescence Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Electrolyte Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303
626
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Electron microscopy Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Electron probe Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Electronic materials PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 Electronic structure Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Elements Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Epoxide equivalent Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Equivalent circuit Modeling and analysis of multilayer piezoelectric transformer, 616 Erbium oxide (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 ESR spectroscopy Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Ethanol sensing Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Ethylene–propylene (EP) copolymers Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 EXAFS Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 -Fe2O3 nanoparticles Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Fe–Ti–O nanocomposites Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Ferroelectric properties Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373 Ferroelectric thin films Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Filler Voiding behaviour and microstructure of a filled polyester film, 540 First-principles calculation Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Flexural sensitivity Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Fluorescence Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269
Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Fluorescent Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Fractal dimension Surface analysis of nanomachined films using atomic force microscopy, 379 FT-IR Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185 Fullerenes Coating multi-walled carbon nanotubes with metal sulfides, 159 Full-potential augmented plane wave plus local orbitals method Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Glasses Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Grafting reactions Surface analysis of -ray irradiation modified PBO fiber, 245 Grain size (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Grazing-incidence X-ray diffraction Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Hardness The Ni–P–SiC composite produced by electro-codeposition, 146 Heat treatment Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Heavy-atom effect Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Hematite Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Heteropoly acid Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 High-energy resolution AES analysis Passivity and its breakdown in Al-based amorphous alloys, 348 High-entropy alloys Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Hittorf’s method Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Hollow microspheres Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Homogeneous precipitation Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 Hot-wall epitaxy Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Hydride electrodes Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Hydrogen and hydrocarbon sensor Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Hydrotalcite catalyst Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Hydrothermal growth Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photo-catalytic activity, 104 Hydrothermal procedure Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Hydrothermal A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Hydrothermal-calcinations Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Incorporation of hydrophobic organic compounds Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Indium phosphide Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Indium Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Inhibitor An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Insulating films Passivity and its breakdown in Al-based amorphous alloys, 348 Interdendrite Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Intermediate temperature solid oxide fuel cells Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303 Ionic conductivity Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Iridium dioxide Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 ITO Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Jahn–Teller distortion Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499
627
Jute fibers Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Keggin structure Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 La(Mg1/2Ti1/2)O3 Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 Lanthanum oxide Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Large scale Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Lattice strain Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152 Laurate Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Lewis acid doping Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Light-emitting diodes Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Li-ion batteries Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 LiNbO3 Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Linearized augmented plane wave Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Liquid crystals Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Lithium ion batteries Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Localized corrosion Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Luminescence Coating multi-walled carbon nanotubes with metal sulfides, 159 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Magnetic materials Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Magnetic properties Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Maleic anhydride Structure and properties of Cr promoted VPO catalysts, 197 Manganese–cobalt oxide The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138
628
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Mechanical properties Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Metal complexes Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Metal contacts Thermodynamic stability of SiO2 in contact with thin metal films, 487 Metal oxide thin films Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Metallic glasses Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Metalloporphyrin Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Metals Growth of dendritic antimony nanocrystals at room temperature, 286 Metal-support interaction Interaction of Co thin films with SiO2: Effect of Co loading, 613 Metatitanic acid Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Methanol oxidation Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Methylene blue Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Microcrystalline cellulose powder Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Microemulsion Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Microparticles Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Micro-plasma oxidation Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Microstructure Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Microwave Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Mn-doped alumina Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 MnIn2S4 Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Molten electrolyte Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505
MoO3 doping Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Morphology evolution Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Morphology Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Mossbauer spectroscopy Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Multilayer piezoelectric transformer (MPT) Modeling and analysis of multilayer piezoelectric transformer, 616 Nanocomposite materials Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Nanocomposites Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Nanocrystalline powders Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 Nanocubes Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Nanolithography Surface analysis of nanomachined films using atomic force microscopy, 379 Nanomachining Surface analysis of nanomachined films using atomic force microscopy, 379 Nanoparticles A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Nanorods A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Nanostructures Coating multi-walled carbon nanotubes with metal sulfides, 159 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Growth of dendritic antimony nanocrystals at room temperature, 286 Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Nb2O5 A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Nickel phthalocyanine Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Nickel powder Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Nickel–phosphorus alloy The Ni–P–SiC composite produced by electro-codeposition, 146 Ni12P5 Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni2P Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni3P coating on Ni Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni3P Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni–Cr alloy Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Ni–Cr–Mo–Cu multi-element alloying Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 Ni–Zn ferrites Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310 Non-aqueous medium Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Non-magnetic Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 Optical bandgap Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Optical microscopy Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Optical properties Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Organic light emitting devices Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Orientation Voiding behaviour and microstructure of a filled polyester film, 540 Oxidation Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Oxides A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Oxygen evolution Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Particle size A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Passivity breakdown Passivity and its breakdown in Al-based amorphous alloys, 348 PBO fiber Surface analysis of -ray irradiation modified PBO fiber, 245 Pd metal nanoparticles Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152
629
Phenylthiourea Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Phosphor Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Photocatalyst Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Photo-catalytic activity Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Photocatalytic degradation Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Photoluminescence Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Piezoelectric anisotropy Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Pit nucleation potential Passivity and its breakdown in Al-based amorphous alloys, 348 Platelets Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 PMN–xPT single crystal Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Polyaniline Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Polyaniline-dodecylhydrogensulfate-acid salt Polyaniline-dodecylhydrogensulfate-acid salt: synthesis and characterization, 82 Polyethylene glycol Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Polyethylene oxide Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polyethylene terephthalate (PET) Voiding behaviour and microstructure of a filled polyester film, 540 Polymer adsorption Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polymer electrolytes Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Polymer purification Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polymer Synthesis of Ag/polyaniline nanocomposite via an in situ photo-redox mechanism, 214 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229
630
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Polymeric Glass Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Polypyrrole Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Porphyrin Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Positron annihilation Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Precipitation A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Preparation Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Pressure effect Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Process parameters Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Pt particles Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 PVA-based Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Pyridinium chloro chromate Polyaniline-dodecylhydrogensulfate-acid salt: synthesis and characterization, 82 Pyrolysis Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Radio-frequency sputtering Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Raman scattering spectroscopy Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Rare earth oxide Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 -ray irradiation Surface analysis of -ray irradiation modified PBO fiber, 245 Reactivity Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Rectorite Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Refractive index Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Residual stress The Ni–P–SiC composite produced by electro-codeposition, 146 RF magnetron sputtering Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Roughness Surface analysis of nanomachined films using atomic force microscopy, 379
Ruthenium oxide Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Ruthenium Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Scanning electron microscopy Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Screen-printed thick films Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Segregation Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Selective oxidation Structure and properties of Cr promoted VPO catalysts, 197 Sellenium nanoparticles Evidence on the size-dependent absorption spectral evolution of selenium nanoparticles, 591 SEM Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 Semiconductor Coating multi-walled carbon nanotubes with metal sulfides, 159 Silicate Interaction of Co thin films with SiO2: Effect of Co loading, 613 Single crystal Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Sintering Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 SiO2–metal reactions Thermodynamic stability of SiO2 in contact with thin metal films, 487 Sodium hexaniobate A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 SO42/TiO2 Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Solid-state ion transport Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Sol–gel Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Spark plasma sintering Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Spectral evolution Evidence on the size-dependent absorption spectral evolution of selenium nanoparticles, 591 Spherical nanostructured powders Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Spinel structure Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Spray deposition Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 SrBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Steel corrosion An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Stress corrosion cracking Corrosion behaviour of titanium in non-aqueous solvents, 475 Substrate temperature Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274 Sulfonated polystyrene Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Supercapacitors The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 Super-hydrophilic property Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 Surface analysis Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Surface area A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Surface charge density Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Surface properties Surface analysis of -ray irradiation modified PBO fiber, 245 Surfaces Thermodynamic stability of SiO2 in contact with thin metal films, 487 Surfactants-modified layered double hydroxides Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Swelling Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Symbolic expression Modeling and analysis of multilayer piezoelectric transformer, 616 Technological parameters Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 TEM Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Ternary eutectic melt Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Thermal decomposition Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Thermal properties Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Thermal stability Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Thermal studies Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492
631
Thermodynamic stability of SiO2 Thermodynamic stability of SiO2 in contact with thin metal films, 487 Thermoelectric properties Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39 Thermogravimetric analysis Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Thin film Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373 Thermodynamic stability of SiO2 in contact with thin metal films, 487 Ti(C,N)-based cermet Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Tin dioxide Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Tin oxide Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Ti–6Al–4V alloy Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 TiO2/SiO2 composite films Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 Titania Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Titanium ion implantation Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Titanium Corrosion behaviour of titanium in non-aqueous solvents, 475 Transition metal oxides Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Transmission electron microscopy Interaction of Co thin films with SiO2: Effect of Co loading, 613 Trap effect Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Trioctylphosphine Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Tungsten Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16
632
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Ultrasonic spray pyrolysis Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Ultrathin layer Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 UV–vis spectra Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185 Varistors Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 V-based solid solution alloys Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Voiding Voiding behaviour and microstructure of a filled polyester film, 540 VPO catalysts Structure and properties of Cr promoted VPO catalysts, 197 V-shaped cantilever Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Wet impregnation Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 XAS Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 X–rays Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310
X-ray diffraction Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 X-ray photoelectron spectroscopy (XPS) Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 X-ray scattering Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Zeta potential Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Zinc stannate Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Zircalloy-4 Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Zn0.40Mn0.60Se thin film Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274 ZnSxSe1x thin films Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 ZnTe Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Zone melting Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39
Subject Index of Volume 92 A. Oxides Electrical and magnetic properties of YBaCo4O7, 33 Absorption coefficient Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Accelerated aging and composting Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Acidity Structure and properties of Cr promoted VPO catalysts, 197 Activated carbon Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Activation energy Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Adsorption isotherms Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Adsorption layer thickness Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Al-based alloys Passivity and its breakdown in Al-based amorphous alloys, 348 Amorphous alloys Passivity and its breakdown in Al-based amorphous alloys, 348 Anatase nanocrystal Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Anatase TiO2 nanoparticles Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Anionic transport number Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Anodic deposition The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 Anodic oxide film Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Aqueous chemical solution deposition Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Arrhenius and Mott models Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Elsevier B.V. doi:10.1016/S0254-0584(05)00212-9
Artificial superlattices Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Atomic force microscope Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Atomic force microscopy Surface analysis of nanomachined films using atomic force microscopy, 379 Auger electron spectroscopy (AES) Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Average intercalation voltage Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 BaBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Bi3.5La0.5Ti3O12 thin films Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Bilayered materials Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Bi–Te–Se Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39 Bismuth titanate Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373
C. Electrical characterization Electrical and magnetic properties of YBaCo4O7, 33 C. Electrochemical techniques Electrical and magnetic properties of YBaCo4O7, 33 CaBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Calcium modified lead titanate Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Carbon nanofiber Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71
624
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Carbon nanotubes Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Carbon steel Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Carbon Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Carboxylic acid Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Catalyst Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Cation–anion–cation Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Cation–cation interactions Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 CdTe Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 CeO2 nanoparticles Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Ceramic coatings Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Ceramic fabrication Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Ceramics Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ce3 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Chemical reduction Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Chemical synthesis Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Coating multi-walled carbon nanotubes with metal sulfides, 159 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Growth of dendritic antimony nanocrystals at room temperature, 286 Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609
Chemisorption Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Citric acid Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 Close-spaced evaporation Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 CO catalytic activity A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Co films Interaction of Co thin films with SiO2: Effect of Co loading, 613 Co/ZrO2 oxide Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 Coatings Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Cobalt Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Composite electroplating The Ni–P–SiC composite produced by electro-codeposition, 146 Composites Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Computer modelling and simulation Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Conducting copolymers Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Conductive polymer Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Conductivity Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 4-Coordinated Ti ions on {1 0 1} surface Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Co-precipitation Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Co-Rh spinel coatings Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Corrosion inhibition Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Corrosion resistance Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Corrosion test Corrosion behaviour of titanium in non-aqueous solvents, 475
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Corrosion Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Cr promoter Structure and properties of Cr promoted VPO catalysts, 197 Crystal structure Structural aspects of the Co/ZrO2 catalytic system: Effect of the chemical synthesis, 327 Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Crystallization Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Voiding behaviour and microstructure of a filled polyester film, 540 Crystallographic phase transformation Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Cyclic voltammetry The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 D. Magnetic properties Electrical and magnetic properties of YBaCo4O7, 33 D. Transport properties Electrical and magnetic properties of YBaCo4O7, 33 DCJTB Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Defect barriers (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Degradation Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 Dendrites Growth of dendritic antimony nanocrystals at room temperature, 286 Desorption Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Diamond Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152 Dielectric constant Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Dielectric loss Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Dielectric permittivity Effect of Zn doping on temperature and frequency dependence of dielectric permittivity and dielectric relaxation for synthesized tetragonal copper–gallium ferrite, 278 Dielectric properties Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373
625
Diffraction Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 Diffusion Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Dithiophosphonic acid derivatives An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Double glow Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 Electrical and sintering study Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303 Electrical properties Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Electrocatalysis Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Electrocatalysts Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Electrochemical behaviour Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Electrochemical impedance spectroscopy Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Electrochemical polymerization Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Electrochemical properties Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Electrochemical techniques Corrosion behaviour of titanium in non-aqueous solvents, 475 Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Electrochromic properties Conducting polymers of octanoic acid 2-thiophen-3-yl-ethyl ester and their electrochromic properties, 413 Electroluminescence Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Electrolyte Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303
626
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Electron microscopy Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Electron probe Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Electronic materials PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 Electronic structure Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Elements Deposition of additives onto surface of carbon materials by blending method—general conception, 1 Epoxide equivalent Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Equivalent circuit Modeling and analysis of multilayer piezoelectric transformer, 616 Erbium oxide (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 ESR spectroscopy Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Ethanol sensing Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Ethylene–propylene (EP) copolymers Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 EXAFS Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 -Fe2O3 nanoparticles Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Fe–Ti–O nanocomposites Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Ferroelectric properties Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373 Ferroelectric thin films Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Filler Voiding behaviour and microstructure of a filled polyester film, 540 First-principles calculation Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Flexural sensitivity Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Fluorescence Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269
Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Fluorescent Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Fractal dimension Surface analysis of nanomachined films using atomic force microscopy, 379 FT-IR Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185 Fullerenes Coating multi-walled carbon nanotubes with metal sulfides, 159 Full-potential augmented plane wave plus local orbitals method Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Glasses Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Grafting reactions Surface analysis of -ray irradiation modified PBO fiber, 245 Grain size (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Grazing-incidence X-ray diffraction Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Hardness The Ni–P–SiC composite produced by electro-codeposition, 146 Heat treatment Effect of pyrolysis temperature on the properties of Bi3.5La0.5Ti3O12 thin films deposited by aqueous chemical solution deposition, 431 Heavy-atom effect Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Hematite Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Heteropoly acid Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 High-energy resolution AES analysis Passivity and its breakdown in Al-based amorphous alloys, 348 High-entropy alloys Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Hittorf’s method Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Hollow microspheres Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Homogeneous precipitation Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 Hot-wall epitaxy Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Hydride electrodes Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Hydrogen and hydrocarbon sensor Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Hydrotalcite catalyst Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Hydrothermal growth Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photo-catalytic activity, 104 Hydrothermal procedure Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Hydrothermal A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Hydrothermal-calcinations Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Incorporation of hydrophobic organic compounds Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Indium phosphide Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Indium Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Inhibitor An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Insulating films Passivity and its breakdown in Al-based amorphous alloys, 348 Interdendrite Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Intermediate temperature solid oxide fuel cells Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlorebased materials—the influence of bismuth, 295 Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore based materials: the influence of bismuth, 303 Ionic conductivity Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Iridium dioxide Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 ITO Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Jahn–Teller distortion Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499
627
Jute fibers Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Keggin structure Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 La(Mg1/2Ti1/2)O3 Synthesis of La(Mg1/2Ti1/2)O3 via citric acid precursor, 220 Lanthanum oxide Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Large scale Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Lattice strain Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152 Laurate Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Lewis acid doping Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Light-emitting diodes Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Li-ion batteries Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 LiNbO3 Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Linearized augmented plane wave Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Liquid crystals Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Lithium ion batteries Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Localized corrosion Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Luminescence Coating multi-walled carbon nanotubes with metal sulfides, 159 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Magnetic materials Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Magnetic properties Studies of magnetic properties of iron-based coatings produced by a high-velocity oxy-fuel process, 419 Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Maleic anhydride Structure and properties of Cr promoted VPO catalysts, 197 Manganese–cobalt oxide The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138
628
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Mechanical properties Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Metal complexes Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Metal contacts Thermodynamic stability of SiO2 in contact with thin metal films, 487 Metal oxide thin films Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Metallic glasses Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Metalloporphyrin Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Metals Growth of dendritic antimony nanocrystals at room temperature, 286 Metal-support interaction Interaction of Co thin films with SiO2: Effect of Co loading, 613 Metatitanic acid Size-controlled synthesis of anatase TiO2 nanoparticles by carboxylic acid group-containing organics, 595 Methanol oxidation Deposition and electrocatalytic properties of platinum on wellaligned carbon nanotube (CNT) arrays for methanol oxidation, 548 Methylene blue Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Microcrystalline cellulose powder Degradability of composites, prepared from ethylene–propylene copolymer and jute fiber under accelerated aging and biotic environments, 458 Microemulsion Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Microparticles Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Micro-plasma oxidation Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 Microstructure Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Microwave Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Mn-doped alumina Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 MnIn2S4 Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Molten electrolyte Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505
MoO3 doping Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Morphology evolution Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Morphology Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Mossbauer spectroscopy Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Multilayer piezoelectric transformer (MPT) Modeling and analysis of multilayer piezoelectric transformer, 616 Nanocomposite materials Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Nanocomposites Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Nanocrystalline powders Synthesis and thermal evolution of Mn-doped alumina nanoparticles by homogeneous precipitation with urea, 366 Nanocubes Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Nanolithography Surface analysis of nanomachined films using atomic force microscopy, 379 Nanomachining Surface analysis of nanomachined films using atomic force microscopy, 379 Nanoparticles A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Nanorods A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Nanostructures Coating multi-walled carbon nanotubes with metal sulfides, 159 Synthesis of Ag/polyaniline nanocomposite via an in situ photoredox mechanism, 214 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229 Growth of dendritic antimony nanocrystals at room temperature, 286 Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Nb2O5 A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 Nickel phthalocyanine Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Nickel powder Preparation of submicron nickel powders by microwave-assisted hydrothermal method, 234 Nickel–phosphorus alloy The Ni–P–SiC composite produced by electro-codeposition, 146 Ni12P5 Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni2P Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni3P coating on Ni Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni3P Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Ni–Cr alloy Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Ni–Cr–Mo–Cu multi-element alloying Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 Ni–Zn ferrites Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310 Non-aqueous medium Preparation and magnetic properties of spherical -Fe2O3 nanoparticles via a non-aqueous medium, 600 Non-magnetic Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 Optical bandgap Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Optical microscopy Changes in the yield and size distribution of mesophase spheres on suppressing convective motion in a fused coal tar pitch, 205 Optical properties Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492 Organic light emitting devices Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Orientation Voiding behaviour and microstructure of a filled polyester film, 540 Oxidation Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Oxides A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Oxygen evolution Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Particle size A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Passivity breakdown Passivity and its breakdown in Al-based amorphous alloys, 348 PBO fiber Surface analysis of -ray irradiation modified PBO fiber, 245 Pd metal nanoparticles Study of palladium metal particle deposition on the conductive diamond surface by XRD, XPS and electrochemistry, 152
629
Phenylthiourea Inhibiting action of phenylthiourea towards iron-based metallic glass corrosion in acid environment, 403 Phosphor Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180 Photocatalyst Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Photo-catalytic activity Morphology evolution of anatase TiO2 nanocrystals under a hydrothermal condition (pH = 9.5) and their ultra-high photocatalytic activity, 104 Photocatalytic degradation Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Photoluminescence Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Piezoelectric anisotropy Seed effect in fabrication of calcium modified lead titanate ceramics, 453 Pit nucleation potential Passivity and its breakdown in Al-based amorphous alloys, 348 Platelets Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition, 48 PMN–xPT single crystal Crystal orientation dependence of the optical bandgap of (1 x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals, 123 Polyaniline Mixed doping of polyaniline with iron(III) chloride in the presence of hexafluoroacetylacetone: chemical and structural consequences, 27 Synthesis of polyaniline/nano-CeO2 composite microspheres via a solid-stabilized emulsion route, 134 Polyaniline-dodecylhydrogensulfate-acid salt Polyaniline-dodecylhydrogensulfate-acid salt: synthesis and characterization, 82 Polyethylene glycol Inhibition effect of polyethylene glycol on the corrosion of carbon steel in sulphuric acid, 480 Polyethylene oxide Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polyethylene terephthalate (PET) Voiding behaviour and microstructure of a filled polyester film, 540 Polymer adsorption Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polymer electrolytes Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt, 354 Polymer purification Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Polymer Synthesis of Ag/polyaniline nanocomposite via an in situ photo-redox mechanism, 214 PVA stabilized gold nanoparticles by use of unexplored albeit conventional reducing agent, 229
630
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Polymeric Glass Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Polypyrrole Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Porphyrin Synthesis of metalloporphyrins by microwave irradiation and their fluorescent properties, 322 Positron annihilation Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Precipitation A novel surfactant-free emulsion approach to ZnO microspheres with nanostructured surfaces, 609 Preparation Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16 Pressure effect Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Process parameters Parametric study of carbon nanofiber growth by catalytic ethylene decomposition on hydrotalcite derived catalysts, 71 Pt particles Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 PVA-based Study of ionic transport properties of alkaline poly(vinyl) alcoholbased polymer electrolytes, 251 Pyridinium chloro chromate Polyaniline-dodecylhydrogensulfate-acid salt: synthesis and characterization, 82 Pyrolysis Carbon nanotubes from catalytic pyrolysis of polypropylene, 256 Radio-frequency sputtering Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode, 424 Raman scattering spectroscopy Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Rare earth oxide Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 -ray irradiation Surface analysis of -ray irradiation modified PBO fiber, 245 Reactivity Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 Rectorite Effect of epoxide equivalent on microstructure of epoxy/rectorite nanocomposite studied by positrons, 361 Refractive index Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Residual stress The Ni–P–SiC composite produced by electro-codeposition, 146 RF magnetron sputtering Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Roughness Surface analysis of nanomachined films using atomic force microscopy, 379
Ruthenium oxide Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 Ruthenium Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Scanning electron microscopy Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Screen-printed thick films Hydroxyapatite screen-printed thick films: optical and electrical properties, 260 Segregation Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, 112 Selective oxidation Structure and properties of Cr promoted VPO catalysts, 197 Sellenium nanoparticles Evidence on the size-dependent absorption spectral evolution of selenium nanoparticles, 591 SEM Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 Semiconductor Coating multi-walled carbon nanotubes with metal sulfides, 159 Silicate Interaction of Co thin films with SiO2: Effect of Co loading, 613 Single crystal Surfactant-assisted synthesis of single crystal BaWO4 octahedral microparticles, 59 Sintering Effects of glass additions on microstructure and microwave dielectric properties of La4Ti9O24 ceramics, 98 SiO2–metal reactions Thermodynamic stability of SiO2 in contact with thin metal films, 487 Sodium hexaniobate A simple preparation procedure for the synthesis of sodium hexaniobate nanorods, 128 SO42/TiO2 Correlation between photoreactivity and photophysics of sulfated TiO2 photocatalyst, 470 Solid-state ion transport Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Sol–gel Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Spark plasma sintering Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Spectral evolution Evidence on the size-dependent absorption spectral evolution of selenium nanoparticles, 591 Spherical nanostructured powders Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Spinel structure Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Spray deposition Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 SrBPO5 Spectroscopic properties of Ce3 doped MBPO5 (M = Ca, Sr, Ba) under VUV excitation, 180
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Steel corrosion An investigation on the inhibition effects of some new dithiophosphonic acid monoesthers on the corrosion of the steel in 1 M HCl medium, 565 Stress corrosion cracking Corrosion behaviour of titanium in non-aqueous solvents, 475 Substrate temperature Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274 Sulfonated polystyrene Uniform hollow conductive polymer microspheres synthesized with the sulfonated polystyrene template, 164 Supercapacitors The electrochemical characteristics of binary manganese–cobalt oxides prepared by anodic deposition, 138 Super-hydrophilic property Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 Surface analysis Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition, 505 Surface area A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Surface charge density Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Surface properties Surface analysis of -ray irradiation modified PBO fiber, 245 Surfaces Thermodynamic stability of SiO2 in contact with thin metal films, 487 Surfactants-modified layered double hydroxides Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Swelling Small molecule desorption from a swelling polymeric glass in polymer solution: Energy transfer method, 269 Symbolic expression Modeling and analysis of multilayer piezoelectric transformer, 616 Technological parameters Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique, 340 TEM Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Ternary eutectic melt Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 Thermal decomposition Preparation and characterisation of spinel type cobalt and rhodium oxide coatings on titanium, 526 Thermal properties Synthesis, characterization and thermal stability of Ni3P coatings on nickel, 534 Thermal stability Thermal stability of polypyrrole prepared from a ternary eutectic melt, 21 A novel material of Ce0.7Zr0.3Ba0.1O2.1: Synthesis, characterization and its catalytic performance for CO oxidation, 43 Thermal studies Preparation and characterization of lithium fluorophosphate glasses doped with MoO3, 492
631
Thermodynamic stability of SiO2 Thermodynamic stability of SiO2 in contact with thin metal films, 487 Thermoelectric properties Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39 Thermogravimetric analysis Transition metal complexes from 2-(2-hydroxyphenyl)benzoxazole: A spectroscopic and thermogravimetric stability study, 389 Thin film Photoluminescence in manganese indium sulphide thin films deposited by chemical spray pyrolysis, 240 Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method, 373 Thermodynamic stability of SiO2 in contact with thin metal films, 487 Ti(C,N)-based cermet Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering, 64 Tin dioxide Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Tin oxide Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 Nanostructured tin oxide: Synthesis and gas-sensing properties, 384 Preparation and surface characterization of Ti/SnO2–RuO2–IrO2 thin films as electrode material for the oxidation of phenol, 559 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 Ti–6Al–4V alloy Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by microplasma oxidation, 408 TiO2/SiO2 composite films Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film, 10 Titania Study of cobalt dispersion on titania consisting various rutile:anatase ratios, 572 Preparation and catalytic property study of a novel kind of suspended photocatalyst of TiO2-activated carbon immobilized on silicone rubber film, 604 Titanium ion implantation Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Titanium Corrosion behaviour of titanium in non-aqueous solvents, 475 Transition metal oxides Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds, 499 Transmission electron microscopy Interaction of Co thin films with SiO2: Effect of Co loading, 613 Trap effect Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 Trioctylphosphine Synthesis of indium phosphide nanoparticles via catalytic cleavage of phosphorus carbon bond in n-trioctylphosphine by indium, 54 Tungsten Synthesis and conductivity of undecatungstocobaltoindic heteropoly acid, 16
632
Subject Index of Volume 92/Materials Chemistry and Physics 92 (2005) 623–632
Ultrasonic spray pyrolysis Powder properties of partially substituted LiMxMn2xO4 (M = Al, Cr, Fe and Co) synthesized by ultrasonic spray pyrolysis, 172 Ultrathin layer Trap effect of an ultrathin DCJTB layer in organic light-emitting diodes, 291 UV–vis spectra Fourier-transform infrared and UV–vis spectroscopes of nickel phthalocyanine thin films, 185 Varistors Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive, 118 (Er, Co, Nb)-doped SnO2 varistor ceramics, 578 V-based solid solution alloys Structural and electrochemical characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) hydrogen storage electrode alloys, 554 Voiding Voiding behaviour and microstructure of a filled polyester film, 540 VPO catalysts Structure and properties of Cr promoted VPO catalysts, 197 V-shaped cantilever Flexural sensitivity of a V-shaped cantilever of an atomic force microscope, 438 Wet impregnation Influence of preparation technique and iron doping on the structure and reactivity of mixed Fe–Ti–O nanocomposites, 394 XAS Genesis and growth of platinum subnano-particles on activatedcarbon characterized by X-ray absorption spectroscopy: effects of preparation conditions, 89 X–rays Structural and electrical studies on La3 substituted Ni–Zn ferrites, 310
X-ray diffraction Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds, 190 Effect of water degradation on the Zn2 substituted YBa2Cu3O7 superconductor, 225 X-ray photoelectron spectroscopy (XPS) Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 X-ray scattering Preparation of heteroepitaxial LaNiO3 thin films on a SrTiO3 substrate for growing an artificial superlattice with RF sputtering, 585 Zeta potential Adsorption of commercial, filtrated and fractionated polyethylene oxide onto hematite, 519 Zinc stannate Two-step synthesis and ethanol sensing properties of Zn2SnO4–SnO2 nanocomposites, 5 Zircalloy-4 Influence of titanium ion implantation on the corrosion behavior of zircalloy-4 in 1 M H2SO4, 443 Zn0.40Mn0.60Se thin film Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films, 274 ZnSxSe1x thin films Structural behaviour of ZnSxSe1x films deposited by close-spaced evaporation, 448 ZnTe Full-potential investigation of the electronic and optical properties of stressed CdTe and ZnTe, 333 Zone melting Effect of TeI4 content on the thermoelectric properties of n-type Bi–Te–Se crystals prepared by zone melting, 39