- Email: [email protected]
Weld flaw detection evaluation utilizing ultrasonics and radiography (Comparison of ultrasonics with radiography for Al butt welds)
Some details of the control of iron aad steel products by means of Lamb waves (Wire, strip, sheet) Baldi, F., Quaroni, A. Metallurglca Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive testing, Sirmione, March 1967) pp 215-224 (In Italian) (1116)
Ultrasonic inspection of soundness and penetration of corner welds for casings ln zircaloy-2 Bitran, M., Laurent-Atthalin, C., Scheidecker, M. Revue de Metallurgie,Vol 65, No 11 (Noveaber 1968) pp 780-788 (In French) (1117) Non-destructive testing of graphite at tbe Los Alamo8 Scientific Laboratory (Ultrasonics and sonics, eddy currents, beta backscattering and radiography) Blanks, B. L., et al Non-destructive Testing of Nuclear Graphite Symposium, ASTM Special Technical Publication 439 (1968) pp 18-36 (1118) Ultrasonic method for determining tbe binder content and porosity of fibre-glass reinforced plastics Bobrikov, L. P., Medredev, M. 2. Mekhanika Polimerov,Vol 4 (May-June 1968) pp 547-554 (In Russian) (1119) Some examples of the evaluation of defects by means of ultrasound8 in the constructive field of the Grandi Motori (For forgings, welds, and pipes) Bordoni, C. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 251-258 (In Italian) (1120) Improvements to a device for control by ultrasonic echo Branson Instruments Inc French Patent 1,548,933 (1968) (Applied for 18 December 1967) (1121) Influence of tbe magnetization on carbon Steel during controls with ultrasound Cane,E. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 279-284 (In Italian) (1122) Compensating means for a piezoelsctric sensing element Cary,K. H., Sheer, R. E. (Jr), Nagamatsu, H. T., Graber, B. C. US Patent 3,402,306 (1’7 September 1968) (Filed 28 June 1966) (1123) Ultrasonic method for determining the resistance to cavitation of a fluid Chistiakov, E. S. Samoletostroenie i Tekhnika Vozdushnogo Flota (Published by lzdatel, Stvo Khar, Kovskogo, Gosudarstvennogo Universitie, USSR) (In Russian) (1124) Determination of tooth bearings in forced connections by means of ultrasound8 Clerico, M., Remondino, M. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 285-292 (In Italian) (1125) Tbe establishment of tbe Benelux recommendations for the control of sheets of quality by means of ultra-sound Declercq, P. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 276-278 (In Italian) (1126)
Method and apparatus for resistance welding and testing (Resistance welder includes electrodes with coolant spaces having ultrasonic transducers for welding and testing. Welds tested by transmitting dtrasonic waves through welding zones) Deutsch, K., Wilkens, G. US Patent 3,410,983 (1968) (Continuationin-part of application 22 January 1963) (1127) Problems of the set-up of ultra-sound devices and processing of results with particular reference to the test of billets Droege, A. Metallurglea ltaliana,Vol 60,No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 196’7) pp 245-248 (In Italian) (1128) Influences of disturbances at higb frequency on the automatical control devices and their elimination [In ultrasonic testing] Droege, A. Metallurgica Italiana, Vol 60. No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 248-250 (In Italian) (1129) Fracture analysis by use of acoustic emission Dunegan, H. L., Harris, D. O., Tatro, C. A. Engineering Fracture Mecha.nics,Vol 18, No 1 (June 1968) pp 105-122 (1130) Integration of ultrasonic bond signals Edenborough, N. B. United States Atomic Energy Commission Report LA-DC 9383 (=Conf-681004-l).. (Presented at the 28th National Conference of the American Society for Nondestructive Testing, Detroit, Michigan (October 1968)) (1131) Prediction of strength of graphite material by nondestructive test techniques (Ultrasonic, penetraut,x-ray and eddy current methods) Fanelli, L.H., McKown,R.D. Nondestructive Testing of Nuclear Graphite Symposium.ASTM STP 439 (ASTM (1968) pp 48-60 (At 70th annual meeting of ASTM, Boston,Massachusetts (June 1967)) (1132) Non-destructive tests in the control of rolls. Ultrasonic technique for the measurement of hardening layer Ferraresi, M., Gelmi, G. Metallurglca Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 259-268 (In Italian) (1133) Study of the electroacouatic section of an ultrasonic resonance thickness gauge witb a composite acoustic load Filimonov, S. A., Ermolov, I. N. Defektoskopiya,No 6 (1968) pp lo-19 (In Russian) (1134) Reactor design and continuous sampling criteria for an ultrasonic reaction (To minlmise variation in chemical yield) Fogler, S. I and EC Fundamentals, Vol 7, No 3 (August 1968) p 387 (1135) Acceptance standards for welds by ultrasonic testing Fuji, T. Journal of Nondestructive lnspection,Vol 17, No 6 (June 1968) pp 240-248 (In Japanese) (1136)
Detection of incipient failures in pressure vessels by stress-wave emissions Green, A. T. Nuclear Safety, Vol 10, No 1 (January-February 1969) pp 4-18 (1139) Ultras&c testing of melt-through welds in small-diameter thin-walled tubing couplers Hagemaier D., et al Materials Evaluation, Vol xxvi, No 11 (Novem ber 1968) (1140) Ultrasonic testing of solid propellant rocket motors (With a plastic lining between propellant and case) Harris-Maddox, B. Journal of American Ceramic Society, Ceramic Abstracts,Vol 51 (21 September 1968) p 277 (Abstract of Materials Evaluation, Vol 24,No 2, pp 101-109) (1141) Method and apparatus for sonically testing wooden poles used in electrical distribution Heath Incorporated French Patent 1,549,961 (1968) (Applied for 4 January 1968) (1142) Surveillance and inspection programs for LACBWR reactor pressure vessel and ass&iated piping and equipment inspecting equipment. Topical report 5 (Ultrasonic inspection of welds) Howell,R. C., Lautzenheiser, C. E. United States Atomic Energy Commission Report SWRI-1228P-11-8 (1968) 10 pp (1143) Method and test machine (For sonically testing wire) IBM French Patent 1,349,849 (1968) (Applied for 19 December 1967) (1144) An equation for ultrasonic testing lmoto, K. Journal of Nondestructive lnspection,Vol 17, No 6 (June 1968) pp 233-239 (In Japanese) (1145) On the relation between the nondestructive testing of PVC welds and mechanical strength (With ultrasonics, radiography and penetrants) lshi,Y.,et al Journal of Nond-structive lnspection,Vol 17, No 7 (July 1968) pp 271-276 (In Japanese) (1146) Nondestructive material testing (By echo sounding principle of sonic and ultrasonic waves) Kelvin and Hughes Ltd German Patent 1,423, 996 (1968) (Applied for in UK in November 1959) (1147) Ultrasonic holography for nondestructive testing (A general review) Kreuzer, J. L. Materials Evaluation, Vol xxvi, No 10 (October 1968) p 197 (1148) Equation of the acoustic section in the reflection-shadow method of ultrasonic flaw detection Kruglov, B. A. Defektoskopiya, No 6 (1968) pp l-5 (In Russian) (1149)
Improving the resolving power of pulsed ultrasonics flaw detectors Gorbunov, A. I. Defektoskopiya,No 6 (1968) pp 28-32 (In Russian) (113’7)
Weld flaw detection evaluation utilizing ultrasonics and radiography (Comparison of ultrasonics with radiography for Al butt welds) Kurtz, G. W. National Aeronautics and Space Administration Report N68-25831 (NSA-TM-X-53760) (May 1968) 35 pp (1150)
Nouvel lmp&lancem&tre a trois sondes at calculateur (Easily operated impedance meter covers tbe range 50-1OOOMHz) Gouillon; R. L’Onde Electrique, Vol 48, No 501 (December 1968) pp 1096-1103 (1138)
Nondestructive technique provides accurate measurement of adhesion (Acoustic spectrometer) Matuslk, F. H. Adhesives Age, Vol 11, No 12 (December 1968) pp 32-35 (1151)
ULTRASONICS
April
1969
145
Ultrasonic inspection of soundness and penetration of corner welds for casings ln zircaloy-2 Bitran, M., Laurent-Atthalin, C., Scheidecker, M. Revue de Metallurgie,Vol 65, No 11 (Noveaber 1968) pp 780-788 (In French) (1117) Non-destructive testing of graphite at tbe Los Alamo8 Scientific Laboratory (Ultrasonics and sonics, eddy currents, beta backscattering and radiography) Blanks, B. L., et al Non-destructive Testing of Nuclear Graphite Symposium, ASTM Special Technical Publication 439 (1968) pp 18-36 (1118) Ultrasonic method for determining tbe binder content and porosity of fibre-glass reinforced plastics Bobrikov, L. P., Medredev, M. 2. Mekhanika Polimerov,Vol 4 (May-June 1968) pp 547-554 (In Russian) (1119) Some examples of the evaluation of defects by means of ultrasound8 in the constructive field of the Grandi Motori (For forgings, welds, and pipes) Bordoni, C. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 251-258 (In Italian) (1120) Improvements to a device for control by ultrasonic echo Branson Instruments Inc French Patent 1,548,933 (1968) (Applied for 18 December 1967) (1121) Influence of tbe magnetization on carbon Steel during controls with ultrasound Cane,E. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 279-284 (In Italian) (1122) Compensating means for a piezoelsctric sensing element Cary,K. H., Sheer, R. E. (Jr), Nagamatsu, H. T., Graber, B. C. US Patent 3,402,306 (1’7 September 1968) (Filed 28 June 1966) (1123) Ultrasonic method for determining the resistance to cavitation of a fluid Chistiakov, E. S. Samoletostroenie i Tekhnika Vozdushnogo Flota (Published by lzdatel, Stvo Khar, Kovskogo, Gosudarstvennogo Universitie, USSR) (In Russian) (1124) Determination of tooth bearings in forced connections by means of ultrasound8 Clerico, M., Remondino, M. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 285-292 (In Italian) (1125) Tbe establishment of tbe Benelux recommendations for the control of sheets of quality by means of ultra-sound Declercq, P. Metallurgica Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 276-278 (In Italian) (1126)
Method and apparatus for resistance welding and testing (Resistance welder includes electrodes with coolant spaces having ultrasonic transducers for welding and testing. Welds tested by transmitting dtrasonic waves through welding zones) Deutsch, K., Wilkens, G. US Patent 3,410,983 (1968) (Continuationin-part of application 22 January 1963) (1127) Problems of the set-up of ultra-sound devices and processing of results with particular reference to the test of billets Droege, A. Metallurglea ltaliana,Vol 60,No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 196’7) pp 245-248 (In Italian) (1128) Influences of disturbances at higb frequency on the automatical control devices and their elimination [In ultrasonic testing] Droege, A. Metallurgica Italiana, Vol 60. No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 248-250 (In Italian) (1129) Fracture analysis by use of acoustic emission Dunegan, H. L., Harris, D. O., Tatro, C. A. Engineering Fracture Mecha.nics,Vol 18, No 1 (June 1968) pp 105-122 (1130) Integration of ultrasonic bond signals Edenborough, N. B. United States Atomic Energy Commission Report LA-DC 9383 (=Conf-681004-l).. (Presented at the 28th National Conference of the American Society for Nondestructive Testing, Detroit, Michigan (October 1968)) (1131) Prediction of strength of graphite material by nondestructive test techniques (Ultrasonic, penetraut,x-ray and eddy current methods) Fanelli, L.H., McKown,R.D. Nondestructive Testing of Nuclear Graphite Symposium.ASTM STP 439 (ASTM (1968) pp 48-60 (At 70th annual meeting of ASTM, Boston,Massachusetts (June 1967)) (1132) Non-destructive tests in the control of rolls. Ultrasonic technique for the measurement of hardening layer Ferraresi, M., Gelmi, G. Metallurglca Italiana, Vol 60, No 4 (April 1968) (Proceedings of the 5th Seminar on Nondestructive Testing, Sirmione, March 1967) pp 259-268 (In Italian) (1133) Study of the electroacouatic section of an ultrasonic resonance thickness gauge witb a composite acoustic load Filimonov, S. A., Ermolov, I. N. Defektoskopiya,No 6 (1968) pp lo-19 (In Russian) (1134) Reactor design and continuous sampling criteria for an ultrasonic reaction (To minlmise variation in chemical yield) Fogler, S. I and EC Fundamentals, Vol 7, No 3 (August 1968) p 387 (1135) Acceptance standards for welds by ultrasonic testing Fuji, T. Journal of Nondestructive lnspection,Vol 17, No 6 (June 1968) pp 240-248 (In Japanese) (1136)
Detection of incipient failures in pressure vessels by stress-wave emissions Green, A. T. Nuclear Safety, Vol 10, No 1 (January-February 1969) pp 4-18 (1139) Ultras&c testing of melt-through welds in small-diameter thin-walled tubing couplers Hagemaier D., et al Materials Evaluation, Vol xxvi, No 11 (Novem ber 1968) (1140) Ultrasonic testing of solid propellant rocket motors (With a plastic lining between propellant and case) Harris-Maddox, B. Journal of American Ceramic Society, Ceramic Abstracts,Vol 51 (21 September 1968) p 277 (Abstract of Materials Evaluation, Vol 24,No 2, pp 101-109) (1141) Method and apparatus for sonically testing wooden poles used in electrical distribution Heath Incorporated French Patent 1,549,961 (1968) (Applied for 4 January 1968) (1142) Surveillance and inspection programs for LACBWR reactor pressure vessel and ass&iated piping and equipment inspecting equipment. Topical report 5 (Ultrasonic inspection of welds) Howell,R. C., Lautzenheiser, C. E. United States Atomic Energy Commission Report SWRI-1228P-11-8 (1968) 10 pp (1143) Method and test machine (For sonically testing wire) IBM French Patent 1,349,849 (1968) (Applied for 19 December 1967) (1144) An equation for ultrasonic testing lmoto, K. Journal of Nondestructive lnspection,Vol 17, No 6 (June 1968) pp 233-239 (In Japanese) (1145) On the relation between the nondestructive testing of PVC welds and mechanical strength (With ultrasonics, radiography and penetrants) lshi,Y.,et al Journal of Nond-structive lnspection,Vol 17, No 7 (July 1968) pp 271-276 (In Japanese) (1146) Nondestructive material testing (By echo sounding principle of sonic and ultrasonic waves) Kelvin and Hughes Ltd German Patent 1,423, 996 (1968) (Applied for in UK in November 1959) (1147) Ultrasonic holography for nondestructive testing (A general review) Kreuzer, J. L. Materials Evaluation, Vol xxvi, No 10 (October 1968) p 197 (1148) Equation of the acoustic section in the reflection-shadow method of ultrasonic flaw detection Kruglov, B. A. Defektoskopiya, No 6 (1968) pp l-5 (In Russian) (1149)
Improving the resolving power of pulsed ultrasonics flaw detectors Gorbunov, A. I. Defektoskopiya,No 6 (1968) pp 28-32 (In Russian) (113’7)
Weld flaw detection evaluation utilizing ultrasonics and radiography (Comparison of ultrasonics with radiography for Al butt welds) Kurtz, G. W. National Aeronautics and Space Administration Report N68-25831 (NSA-TM-X-53760) (May 1968) 35 pp (1150)
Nouvel lmp&lancem&tre a trois sondes at calculateur (Easily operated impedance meter covers tbe range 50-1OOOMHz) Gouillon; R. L’Onde Electrique, Vol 48, No 501 (December 1968) pp 1096-1103 (1138)
Nondestructive technique provides accurate measurement of adhesion (Acoustic spectrometer) Matuslk, F. H. Adhesives Age, Vol 11, No 12 (December 1968) pp 32-35 (1151)
ULTRASONICS
April
1969
145