- Email: [email protected]
XRF coating thickness measurement system
XRF Coating Thickness Measurement System
VeecolUPATechnology Plainview, N.Y The new XRF-5400 Series features the largest motorized programmable stage movement available in an XRF coating thickness measurement system. The XRF-5400 chambers provide
profile unit designed for large panel circuit boards and sheet stock, offering 1 in. of Z-axis, while the XRF-54OOH offers a higher profile with 6 in. of usable Z-axis and is ideal for larger parts commonly used in the metalfinishing industry. Both units are equipped with X- and Y-axis servo drivers for maximum speed and simplicity of sample placement, as well as motorized stage programming. Circle 407 on reader information card
Conveyor Belt System DunAufomafion Inc., Div. of Dun Inc.
Plymouth, Mich.
24 in. (60 cm) of stage movement in the X-axis and 18 in. (46 cm) in the Y-axis. The XRF-54OOL is a low
Durr Automation has introduced its Durrabelt conveyor system, which offers flexibility, reliability, maintainability, quiet, smoother operation, and positive environmental impact. Additional benefits include reductions in process system space and system capital and maintenance costs. Circle 408 on reader information card
Atomic Absorption Spectrometer
Per/&Elmer Corp. Norwalk, Conn.
introduces the Perkin-Elmer SIMAA 6000, a fully automated simultaneous multielement graphite furnace atomic absorption (AA) system using solid-state detection and Echelle polychromator optics. The exceptional performance of the SIMAA 6000 is achieved by combining proven longitudinal Zeeman-Transversely-Heated Graphite Atomizer (THGA) technology with a newly developed Echelle polychromator and solid-state detector optimized for high ultraviolet quantum efficiency. The patented Tetrahedral Echelle Polychromator (TEP) combines high dispersion and luminosity with excellent image quality throughout the focal plane. Incoming radiation is dispersed two-dimensionally so that essentially all wavelengths of interest to AA are distributed within an area measuring 3 cm x 6 cm. The TEP
These products from Aldoa offer you the best methods for cadmium or alternative plating and finishing without using cyanide.
??
Use Novalyte 370 - a neutral pH electrolyte system. aerospace or. . .
??
??
manufacturer
and is production-proven
This product has been approved by a major for many years.
Use Novalyte 390 - an acidic cadmium sulfate electrolyte production-proved, produces a bright and ductile deposit.
system.
This product, too, has been
Use Novalyte ZNI - a non-cadmium, non-cyanide, zinc-nickel alloy plating system - with a pH factor of 6.2 f 0.2, zinc-nickel alloy (12-l 8% nickel content). This product produces bright and ductile deposits out of solution.
Use Aldo Kote ACI 81Aldo Kote ACI 92 - These formulations for iridescent chromate conversion coatings can be used on aluminum, zinc, cadmium, and zinc-nickel alloys. They offer cyanidefree passivation for above mentioned surfaces. Write, call of fax your inquiry to us at: Or reach us through: ??
ALDOA COMPANY 12727 Westwood Ave. Detroit, MI 48223-3433 (313) 273-5705 ??FAX (313) 273-0310
METAL FINISHING . APRIL 1995
-II-
IDEAL CHEIMCAL & SUPPLY CO. P.0. Box 18698 Memphis, TN 38181-0698 I-800 232-6776
73
VeecolUPATechnology Plainview, N.Y The new XRF-5400 Series features the largest motorized programmable stage movement available in an XRF coating thickness measurement system. The XRF-5400 chambers provide
profile unit designed for large panel circuit boards and sheet stock, offering 1 in. of Z-axis, while the XRF-54OOH offers a higher profile with 6 in. of usable Z-axis and is ideal for larger parts commonly used in the metalfinishing industry. Both units are equipped with X- and Y-axis servo drivers for maximum speed and simplicity of sample placement, as well as motorized stage programming. Circle 407 on reader information card
Conveyor Belt System DunAufomafion Inc., Div. of Dun Inc.
Plymouth, Mich.
24 in. (60 cm) of stage movement in the X-axis and 18 in. (46 cm) in the Y-axis. The XRF-54OOL is a low
Durr Automation has introduced its Durrabelt conveyor system, which offers flexibility, reliability, maintainability, quiet, smoother operation, and positive environmental impact. Additional benefits include reductions in process system space and system capital and maintenance costs. Circle 408 on reader information card
Atomic Absorption Spectrometer
Per/&Elmer Corp. Norwalk, Conn.
introduces the Perkin-Elmer SIMAA 6000, a fully automated simultaneous multielement graphite furnace atomic absorption (AA) system using solid-state detection and Echelle polychromator optics. The exceptional performance of the SIMAA 6000 is achieved by combining proven longitudinal Zeeman-Transversely-Heated Graphite Atomizer (THGA) technology with a newly developed Echelle polychromator and solid-state detector optimized for high ultraviolet quantum efficiency. The patented Tetrahedral Echelle Polychromator (TEP) combines high dispersion and luminosity with excellent image quality throughout the focal plane. Incoming radiation is dispersed two-dimensionally so that essentially all wavelengths of interest to AA are distributed within an area measuring 3 cm x 6 cm. The TEP
These products from Aldoa offer you the best methods for cadmium or alternative plating and finishing without using cyanide.
??
Use Novalyte 370 - a neutral pH electrolyte system. aerospace or. . .
??
??
manufacturer
and is production-proven
This product has been approved by a major for many years.
Use Novalyte 390 - an acidic cadmium sulfate electrolyte production-proved, produces a bright and ductile deposit.
system.
This product, too, has been
Use Novalyte ZNI - a non-cadmium, non-cyanide, zinc-nickel alloy plating system - with a pH factor of 6.2 f 0.2, zinc-nickel alloy (12-l 8% nickel content). This product produces bright and ductile deposits out of solution.
Use Aldo Kote ACI 81Aldo Kote ACI 92 - These formulations for iridescent chromate conversion coatings can be used on aluminum, zinc, cadmium, and zinc-nickel alloys. They offer cyanidefree passivation for above mentioned surfaces. Write, call of fax your inquiry to us at: Or reach us through: ??
ALDOA COMPANY 12727 Westwood Ave. Detroit, MI 48223-3433 (313) 273-5705 ??FAX (313) 273-0310
METAL FINISHING . APRIL 1995
-II-
IDEAL CHEIMCAL & SUPPLY CO. P.0. Box 18698 Memphis, TN 38181-0698 I-800 232-6776
73