5529667 Process for recovering ethylene oxide

5529667 Process for recovering ethylene oxide

PatentsALERT 5529663 DELIGNIFICATION OF LIGNOCELLULOSIC MATERIALS WITH PEROXYMONOPHOSPHORIC ACID METHOD FOR CO-PRODUCING FUEL AND IRON Calderon Albe...

125KB Sizes 4 Downloads 97 Views

PatentsALERT

5529663 DELIGNIFICATION OF LIGNOCELLULOSIC MATERIALS WITH PEROXYMONOPHOSPHORIC ACID

METHOD FOR CO-PRODUCING FUEL AND IRON Calderon Alber, Bowling Green, OH, UNITED STATES

Springer Edward L, Madison, WI, UNITED STATES assigned to The United States of America as represented by the Secretary of Agriculture

A method for the co-production of fuel and iron from coal and from iron ore respectively, which is comprised of heating the coal in the absence of oxygen to make a raw coal gas and a residual coke, and of increasing the content of free hydrogen in the coal gas through the cracking against a desulfurizing hot reagent, of the hydrocarbons contained in the gas in order to yield a hydrogen rich, desulfurized, hot reducing synthetic gas. This synthetic gas which is highly reactive, is fed through a bed of iron ore in order to directly reduce the ore to metallized iron. The off-gas exiting from the bed of ore is divided into three parts:-a first part is mixed with the raw coal gas, and is recycled for further use; a second part is used to provide the thermal energy required for the heating of tbe coal to make the raw gas and the coke; and a third part which is purged to maintain the process in balance, is utilized for other thermal needs. The coke when made from metallurgical coal can be used as fuel for making iron in a blast furnace; the coke when made from non-metallurgical coal is gasified to make an additional gas which can be used as a fuel for generating electricity. Other carbonaceous materials may be added to the coal.

Disclosed is a method for the delignification of lignocellulosic materials with acidic solutions of peroxymonophosphoric acid for the delignification and brightening of cellulosic pulps in bleaching; for the production of cellulosic pulps for use in paper making and in regenerated cellulose products; for enhancing the properties of recycled cellulosic fibers and for use in animal feeds and other products where removal or degradation of lignin is beneficial.

5529667 PROCESS FOR RECOVERING ETHYLENE OXIDE Coffey Freylon B, Corpus Christi, TX, UNITED STATES assigned to Hoechst Celanese Corporation In an improved process for recovering ethylene oxide from an aqueous ethylene oxide solution further containing formaldehyde is provided wherein the impure aqueous ethylene oxide solution is introduced into a distillation zone as a feed stream and undergoes distillation therein to form an ethylene oxide product sidestream and an aqueous bottoms product,water is added to the distillation zone to absorb formaldehyde vapor into a liquid phase and combines with the formaldehyde vapor to form an apparent azeotrope, and removing the apparent azeotrope from the column, the improvement is that all or part of the water is a recycled aqueous stream originating from the aqueous bottoms product and introduced to the distillation zone above the feed stream.

5529607 PSA PROCESS WITH DYNAMIC PURGE CONTROL Tan Ziming, Basking Ridge, NJ, UNITED STATES assigned to The BOC Group Inc Oxygen of uniform purity is produced in a two-bed air-fed oxygen pressure swing adsorption process in which the beds are operated out of phase. The steps of the adsorption cycle include a pressurization/production step and a bed regeneration step, with the bed undergoing regeneration being purged with a low pressure stream of the oxygen-enriched gas produced as the nonadsorbed product of the process. The oxygen concentration in the purged gas effluent is continuously periodically monitored, and the maximum oxygen concentration in the effluent during selected purge steps is compared with the maximum oxygen concentration in the effluent during a previous purge step, and the difference is used to adjust the timing and duration of a purge step following the selected purge step in a manner that reduces the difference between the oxygen concentration in the sequential purge steps.

246

J. Cleaner Prod.,

1996, Volume 4, Number

5529696 METHOD OF LAUNDERING ITEMS AND PURIFYING WASTE WATER THEREFROM Tibbitts Dave, Mason, OH, UNITED STATES assigned to Diversey Corporation A method of laundering oily items comprises laundering said items in a wash solution which includes a surfactant system and a source of alkalinity. The source of alkalinity

3-4