- Email: [email protected]
Retraction notice to “Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance” [Mater. Sci. Eng. A 574 (2013) 235–242]
Materials Science & Engineering A 660 (2016) 251
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to “Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance” [Mater. Sci. Eng. A 574 (2013) 235–242] B.V. Mahesh a,n, R.K. Singh Raman a,b, R.O. Scattergood c, C.C. Koch c a
Department of Mechanical and Aerospace Engineering, Monash University, VIC 3800, Australia Department of Chemical Engineering, Monash University, VIC, Australia c Department of Material Science and Engineering, NC State University, NC, USA b
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor. The article contains similar content to a paper of the authors that had already appeared in J. Mater. Sci. 47(2012) 7735–7743. http://dx. doi.org/10.1007/s10853-012-6686-6. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data, including any author's own data, should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
n
DOI of original article: http://dx.doi.org/10.1016/j.msea.2013.02.049 Corresponding author.
http://dx.doi.org/10.1016/j.msea.2016.03.003 0921-5093/& 2016 Elsevier B.V. All rights reserved.
Contents lists available at ScienceDirect
Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea
Retraction notice
Retraction notice to “Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance” [Mater. Sci. Eng. A 574 (2013) 235–242] B.V. Mahesh a,n, R.K. Singh Raman a,b, R.O. Scattergood c, C.C. Koch c a
Department of Mechanical and Aerospace Engineering, Monash University, VIC 3800, Australia Department of Chemical Engineering, Monash University, VIC, Australia c Department of Material Science and Engineering, NC State University, NC, USA b
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor. The article contains similar content to a paper of the authors that had already appeared in J. Mater. Sci. 47(2012) 7735–7743. http://dx. doi.org/10.1007/s10853-012-6686-6. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data, including any author's own data, should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
n
DOI of original article: http://dx.doi.org/10.1016/j.msea.2013.02.049 Corresponding author.
http://dx.doi.org/10.1016/j.msea.2016.03.003 0921-5093/& 2016 Elsevier B.V. All rights reserved.