Erratum to “Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V” [Mater. Sci. Eng. A 655 (2016) 100–112]

Erratum to “Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V” [Mater. Sci. Eng. A 655 (2016) 100–112]

Materials Science & Engineering A 655 (2016) 425 Contents lists available at ScienceDirect Materials Science & Engineering A journal homepage: www.e...

157KB Sizes 5 Downloads 11 Views

Materials Science & Engineering A 655 (2016) 425

Contents lists available at ScienceDirect

Materials Science & Engineering A journal homepage: www.elsevier.com/locate/msea

Erratum

Erratum to “Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V” [Mater. Sci. Eng. A 655 (2016) 100–112] Amanda J. Sterling a, Brian Torries a, Nima Shamsaei a,b, Scott M. Thompson a,b, Denver W. Seely b a b

Department of Mechanical Engineering, Mississippi State University, Box 9552, MS 39762, USA Center for Advanced Vehicular Systems (CAVS), Mississippi State University, Box 5405, MS 39762, USA

It was discovered that the original online version of the above article contained errors that were not the fault of the author(s). The Publisher decided to ‘resupply’ (repost and replace) the XML and online PDF of the article. Unfortunately the discovery of the errors was too late to correct the printed issue. The printed issue has also been correspondingly altered.

DOI of original article: http://dx.doi.org/10.1016/j.msea.2015.12.026 http://dx.doi.org/10.1016/j.msea.2016.01.007 0921-5093/& 2016 Elsevier B.V. All rights reserved.

Elsevier regrets and apologizes for any inconvenience caused by posting a new version of this article online, but hopes that the reader will understand the reasons for doing so.