Erratum to “Measurements of anisotropic surface properties of liquid films of azobenzene derivatives” [Colloids Surf. A: Physicochem. Eng. Aspects 333(2009) 182–186]

Colloids and Surfaces A: Physicochem. Eng. Aspects 340 (2009) 213

Contents lists available at ScienceDirect

Colloids and Surfaces A: Physicochemical and Engineering Aspects journal homepage: www.elsevier.com/locate/colsurfa

Erratum

Erratum to “Measurements of anisotropic surface properties of liquid films of azobenzene derivatives” [Colloids Surf. A: Physicochem. Eng. Aspects 333(2009) 182–186] Kazuhiro Oki a,∗ , Yuji Nagasaka b a b

School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Yokohama, Kanagawa, 223-8522, Japan Department of System Design Engineering, Keio University, 3-14-1 Hiyoshi, Yokohama, Kanagawa, 223-8522, Japan

The publisher regrets that in the above article, Fig. 4 was printed incorrectly. The correct version of Fig. 4 now appears below.

Fig. 4. Cis conversion caused by exposure to UV radiation.

DOI of original article:10.1016/j.colsurfa.2008.09.041. ∗ Corresponding author. Tel.: +81 465 73 7330; fax: +81 465 73 7960. E-mail addresses: [email protected], kazuhiro oki@fujifilm.co.jp (K. Oki). 0927-7757/$ – see front matter © 2008 Elsevier B.V. All rights reserved. doi:10.1016/j.colsurfa.2009.03.001