- Email: [email protected]
Erratum to “The chemomechanical properties of microbial polyhydroxyalkanoates” [Prog. Polym. Sci. 38 (2013) 536–583]
Progress in Polymer Science 39 (2014) 396
Contents lists available at ScienceDirect
Progress in Polymer Science journal homepage: www.elsevier.com/locate/ppolysci
Publisher’s note
Erratum to “The chemomechanical properties of microbial polyhydroxyalkanoates” [Prog. Polym. Sci. 38 (2013) 536–583] Bronwyn Laycock a,b,∗ , Peter Halley a,b,1 , Steven Pratt a,2 , Alan Werker c,3 , Paul Lant a,4 a b c
School of Chemical Engineering, The University of Queensland, St Lucia, Qld 4072, Australia Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, Qld 4072, Australia AnoxKaldnes AB, Klosterängsvägen 11A, SE-226 47 Lund, Sweden
a r t i c l e
i n f o
Article history: Received 22 May 2013 Accepted 3 June 2013 Available online 30 August 2013
The publisher regrets that the printed version of the above article contained a number of errors. The correct and final version follows. The publisher would like to apologise for any inconvenience caused.
DOI of the original article:http://dx.doi.org/10.1016/j.progpolymsci.2012.06.003. ∗ Corresponding author at: School of Chemical Engineering, The University of Queensland, St Lucia, Qld 4072, Australia. Tel.: +61 7 3346 3188; fax: +61 7 3346 3973. E-mail addresses: [email protected] (B. Laycock), [email protected] (P. Halley), [email protected] (S. Pratt), [email protected] (A. Werker), [email protected] (P. Lant). 1 Fax: +61 7 3346 3973. 2 Fax: +61 7 3346 7843. 3 Fax: +46 46 133201. 4 Fax: +61 7 3365 4728. 0079-6700/$ – see front matter http://dx.doi.org/10.1016/j.progpolymsci.2013.06.007
Contents lists available at ScienceDirect
Progress in Polymer Science journal homepage: www.elsevier.com/locate/ppolysci
Publisher’s note
Erratum to “The chemomechanical properties of microbial polyhydroxyalkanoates” [Prog. Polym. Sci. 38 (2013) 536–583] Bronwyn Laycock a,b,∗ , Peter Halley a,b,1 , Steven Pratt a,2 , Alan Werker c,3 , Paul Lant a,4 a b c
School of Chemical Engineering, The University of Queensland, St Lucia, Qld 4072, Australia Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, Qld 4072, Australia AnoxKaldnes AB, Klosterängsvägen 11A, SE-226 47 Lund, Sweden
a r t i c l e
i n f o
Article history: Received 22 May 2013 Accepted 3 June 2013 Available online 30 August 2013
The publisher regrets that the printed version of the above article contained a number of errors. The correct and final version follows. The publisher would like to apologise for any inconvenience caused.
DOI of the original article:http://dx.doi.org/10.1016/j.progpolymsci.2012.06.003. ∗ Corresponding author at: School of Chemical Engineering, The University of Queensland, St Lucia, Qld 4072, Australia. Tel.: +61 7 3346 3188; fax: +61 7 3346 3973. E-mail addresses: [email protected] (B. Laycock), [email protected] (P. Halley), [email protected] (S. Pratt), [email protected] (A. Werker), [email protected] (P. Lant). 1 Fax: +61 7 3346 3973. 2 Fax: +61 7 3346 7843. 3 Fax: +46 46 133201. 4 Fax: +61 7 3365 4728. 0079-6700/$ – see front matter http://dx.doi.org/10.1016/j.progpolymsci.2013.06.007