Wastewater evaporators

The Gestramat CW Control Valve, designed for cooling appications, regulates cooling water flow, keeping cooling-water consumption to a minimum. Gestra’s BW series of Return Temperature Control Valves are designed specifically for controlling either hot water or thermal oil found in heating systems. The Temperature control valves in both the CW and BW series are based upon a simple, easy-to-install mechanical design and each has a thermostat built into the valve. The adjustable valves can be set to open at a desired temperature by simply inserting a key and adjusting the thermostatic control. ensure a long, corrosion-free life, even when waterborne coatings are used. High-quality seals and tensioning springs provide improved wear resistance and durability. The Model 95 incorporates the Binks 60 Series air and fluid nozzles for superior atomization. The 60 Series nozzles provide spray patterns from a 1-in. spot to a 3-ft wide band with uniform and reduced bounce-back and overspray.

Circle 419 on reader information card

Wastewater Evaporators LandaInc. Pottalnd, Ore. Landa’s new line of economy wastewater evaporators, the all-electric Hot Box evaporators, are designed for

handling low volumes of wastewater, from mop water to machine coolant rinsewater. Two models, the HB-550 and HB-1100, can evaporate waste streams, in either a batch process or continuous flow, at a rate of 3 and 7 gph respectively. The HB-1100, with its adjustable thermostat and industrial pump, can double as a dip tank for solvent-free cleaning of parts. Circle 420 on reader information card

Secondary Containment Lining Koch Corrosion Control Cleveland Koch Corrosion Control has introduced a new secondary containment lining for protecting concrete. ElastiLiner combines chemical resistance with crack-bridging and carries a 3year no-crack warranty. Elasti-Liner can be applied, with minimal surface preparation, over new or old concrete; over cracked, well-bonded linings; or over steel. Circle 421 on reader information card

Circle 418 on reader Information card

Temperature Control Valves Gestra Inc. West Caldwell, NJ. Gestra Inc. has announced the availability of its CW and BW lines of temperature control valves designed to help users optimize utilization of cooling water, hot water, or thermal oil.

Whether they’re pumping for aeration, agitation, filtration, recirculation, spraying or transfer, Webster’s rugged, continuous duty pumps are ideal for the plating, electronics, photo processing, pollution control, chemical processing and water treatment industries. Both our Vertical Seal-less Immersibles and our Horizontal End-Suction Centrifugals are available in your choice of corrosion-resistant CPVC, Polypropylene or PVDF (Solef”) with non-metallic construction so that no metal parts come in contact with corrosive chemicals. Dependable and cost-effective, Webster Pumps can handle applications ranging from 5 to over 100 gallons per minute. For the name of a Webster Pumps distributor or to discuss your specific application requirements, call

l-800-766-1950.

Pumps” DistributorTerritoriesAvailable. Circle 150 on reader information card

METAL FINISHING

??

JUNE 1995

127