- Email: [email protected]
Wire Rope Hoists
NEW proaucts
tain heat, as well as push-button electric ignition for ease of operation and a recording thermometer. No. 810 was entirely designed, engineered, built, and fully tested by Grieve. For more information, call (847) 546-8225 or e-mail [email protected].
zones of control for curing epoxy on auromotive transmission parts. The oven chamber is 2' 3" wide x 5' 10" long x 1'8" high. The maximum temperature rating is 177°C (350°F) with a normal operating temperature of 80°C (176°F) in zone 1 and 150°C (302°F) in zone 2. Parts racks are double stacked with 60 parts each to achieve a production rate of 2.4 racks (144 parts) per hour. This horizontal conveyor oven uses an indexing parallel chain style con-
Circle 406 on reader service card
SUMP LEVEL REGULATOR Zebra Skimmers Corp., a full-line
manufacturer of oil skimmers and coolant maintenance equipment, has
veyor system with cleat attachments for accurate rack positioning. Insulated, pneumatically operated vertical lift doors are located at both ends of the oven along with one non-insulated vertical lift door located within the oven between zones for tight temperature uniformity. For more information, call (262) 642-3938, e-mail salesrawisoven.com, or visit www.wisoven.com/Conveyorovens.htm. Circle 405 on reader service card
GAS-HEATED, TWO-ZONE CONVEYOR OVEN Grieve Corp. has unveiled oven No. 810, a 500°F gas-heated, two-zone belt conveyor oven, currently in use
developed its new Sump Level Regulator (SLR) to maintain tank fluid levels. Among the features of the Zebra' Sump Level Regulator: . Heavy duty, mechanical components with only two moving parts Simple, two-step installation process Can be used for all fluid types • When coupled with the Zebra FillStation, it creates an automated fluid-on-demand system
For your free catalog, or for more information, call (888) 249-4855, e-mail [email protected]. or visit www.ZebraSkimmers.com. Circle 407 on reader service card
Circle 042 on reader information card or go to
www.metalfinishing.com/advertisers
86 I metalfinishing I June 2009
for curing aluminum pistons at a customer's facility. Workspace dimensions inside this unit measure 42" wide x 24' deep x 15" high. This Grieve conveyor oven features 350,000 BTU/h installed in modulating natural gas burners in each of the two heating zones. An aluminized steel exterior houses 4" insulated walls, type 304 stainless steel interior with continuously welded seams in zone one and aluminized steel interior in zone two. This unit also features doors at both ends of the workspace to con-
WIRE ROPE HOISTS Konecranes, Inc., a global provider of productivity-enhancing lifting solutions, has introduced the CXT Wire
Rope Hoist, a versatile solution for crane, monorail, and replacement www.metalfinishing.com
NEW proaucts applications, with lifting capacltles up to 80 tons. CXT hoists offer an innovative compact design, exceptional performance, and superior safety, backed by the company's global crane service network. The innovative compact design of the CXT hoist allows for reduced hook approaches and maximizes hook coverage, to lift loads higher and maximize the utilization of the building footprint. CXT hoists and cranes can be used in existing buildings with limited height clearance, and they can be configured to meet a wide variety of demanding applications. CXT hoists come standard with high-performance hoisting motors that offer exceptional power and superior cooling characteristics. Designed to meet demanding operation in high duty-cycle lifting applications, the advanced drive technology of the CXT hoist includes standard two-speed hoist motors and variable-frequency trolley drives for ease of operation while maintaining precise control of vertical and horizontal motions. For more information, call (800) 934-6976 or visit www.konecranesamericas.com.
plant energy efficiency. The new QRC (quartz reflective coating) reflector does not consist of gold or metal oxide but of opaque quartz glass. Quartz glass is extremely heat-resistant and widely resistant to the attack ofaggressive substances. Thanks to the very highly diffuse reflection capability of the emitter with the white reflector, heating processes can be stabilized and optimized, as process parameters such as temperature and coating homogeneity can be held better. For more information, visit www.heraeus.com. Circle 409 on reader service card
ELECTRIC INFRARED BOOST OVEN David Weisman, LLC has rolled out its latest Fast Response Electric Infrared Boost Oven System for
customers seeking to quickly boost the temperatures ofliquid or powder coating on small, medium, and large three-dimensional products prior to entrance into a hot air/convection oven. The system features superior, fast-response electric infrared heaters and controls, and modular design for the addition of more heated height and/or an air recirculation system.
The system can be used as a standalone complete cure oven or as a boost system in conjunction with an existing hot air/convection oven. The boost system will provide significant energy savings, allow increased line speeds and product throughput utilizing minimal floor space, dry or cure problem areas on particular parts, and/or reduce or eliminate crosscolor contamination on powder-coated parts. For more information, call David Weisman at (203) 322-9978 or
Circle 408 on reader service card
INFRARED CURING FOR POWDER APPLICATIONS The newly developed QRC Infrared Emitter from Heraeus Noblelight helps to melt and cure powder coat-
ings efficiently and can be retrofitted even in particularly tight spaces. Tests show that with the new emitters, process parameters such as temperature and homogeneity are better maintained. This means improved quality, reduced costs, and improved www.metalfinishing.com
See us at SUR/FIN 2009, Booth 100 & 401 Circle 040 on reader information card or go to www.metalfinlshing.com/advertisers
June 2009 I metalfinishing I 87
tain heat, as well as push-button electric ignition for ease of operation and a recording thermometer. No. 810 was entirely designed, engineered, built, and fully tested by Grieve. For more information, call (847) 546-8225 or e-mail [email protected].
zones of control for curing epoxy on auromotive transmission parts. The oven chamber is 2' 3" wide x 5' 10" long x 1'8" high. The maximum temperature rating is 177°C (350°F) with a normal operating temperature of 80°C (176°F) in zone 1 and 150°C (302°F) in zone 2. Parts racks are double stacked with 60 parts each to achieve a production rate of 2.4 racks (144 parts) per hour. This horizontal conveyor oven uses an indexing parallel chain style con-
Circle 406 on reader service card
SUMP LEVEL REGULATOR Zebra Skimmers Corp., a full-line
manufacturer of oil skimmers and coolant maintenance equipment, has
veyor system with cleat attachments for accurate rack positioning. Insulated, pneumatically operated vertical lift doors are located at both ends of the oven along with one non-insulated vertical lift door located within the oven between zones for tight temperature uniformity. For more information, call (262) 642-3938, e-mail salesrawisoven.com, or visit www.wisoven.com/Conveyorovens.htm. Circle 405 on reader service card
GAS-HEATED, TWO-ZONE CONVEYOR OVEN Grieve Corp. has unveiled oven No. 810, a 500°F gas-heated, two-zone belt conveyor oven, currently in use
developed its new Sump Level Regulator (SLR) to maintain tank fluid levels. Among the features of the Zebra' Sump Level Regulator: . Heavy duty, mechanical components with only two moving parts Simple, two-step installation process Can be used for all fluid types • When coupled with the Zebra FillStation, it creates an automated fluid-on-demand system
For your free catalog, or for more information, call (888) 249-4855, e-mail [email protected]. or visit www.ZebraSkimmers.com. Circle 407 on reader service card
Circle 042 on reader information card or go to
www.metalfinishing.com/advertisers
86 I metalfinishing I June 2009
for curing aluminum pistons at a customer's facility. Workspace dimensions inside this unit measure 42" wide x 24' deep x 15" high. This Grieve conveyor oven features 350,000 BTU/h installed in modulating natural gas burners in each of the two heating zones. An aluminized steel exterior houses 4" insulated walls, type 304 stainless steel interior with continuously welded seams in zone one and aluminized steel interior in zone two. This unit also features doors at both ends of the workspace to con-
WIRE ROPE HOISTS Konecranes, Inc., a global provider of productivity-enhancing lifting solutions, has introduced the CXT Wire
Rope Hoist, a versatile solution for crane, monorail, and replacement www.metalfinishing.com
NEW proaucts applications, with lifting capacltles up to 80 tons. CXT hoists offer an innovative compact design, exceptional performance, and superior safety, backed by the company's global crane service network. The innovative compact design of the CXT hoist allows for reduced hook approaches and maximizes hook coverage, to lift loads higher and maximize the utilization of the building footprint. CXT hoists and cranes can be used in existing buildings with limited height clearance, and they can be configured to meet a wide variety of demanding applications. CXT hoists come standard with high-performance hoisting motors that offer exceptional power and superior cooling characteristics. Designed to meet demanding operation in high duty-cycle lifting applications, the advanced drive technology of the CXT hoist includes standard two-speed hoist motors and variable-frequency trolley drives for ease of operation while maintaining precise control of vertical and horizontal motions. For more information, call (800) 934-6976 or visit www.konecranesamericas.com.
plant energy efficiency. The new QRC (quartz reflective coating) reflector does not consist of gold or metal oxide but of opaque quartz glass. Quartz glass is extremely heat-resistant and widely resistant to the attack ofaggressive substances. Thanks to the very highly diffuse reflection capability of the emitter with the white reflector, heating processes can be stabilized and optimized, as process parameters such as temperature and coating homogeneity can be held better. For more information, visit www.heraeus.com. Circle 409 on reader service card
ELECTRIC INFRARED BOOST OVEN David Weisman, LLC has rolled out its latest Fast Response Electric Infrared Boost Oven System for
customers seeking to quickly boost the temperatures ofliquid or powder coating on small, medium, and large three-dimensional products prior to entrance into a hot air/convection oven. The system features superior, fast-response electric infrared heaters and controls, and modular design for the addition of more heated height and/or an air recirculation system.
The system can be used as a standalone complete cure oven or as a boost system in conjunction with an existing hot air/convection oven. The boost system will provide significant energy savings, allow increased line speeds and product throughput utilizing minimal floor space, dry or cure problem areas on particular parts, and/or reduce or eliminate crosscolor contamination on powder-coated parts. For more information, call David Weisman at (203) 322-9978 or
Circle 408 on reader service card
INFRARED CURING FOR POWDER APPLICATIONS The newly developed QRC Infrared Emitter from Heraeus Noblelight helps to melt and cure powder coat-
ings efficiently and can be retrofitted even in particularly tight spaces. Tests show that with the new emitters, process parameters such as temperature and homogeneity are better maintained. This means improved quality, reduced costs, and improved www.metalfinishing.com
See us at SUR/FIN 2009, Booth 100 & 401 Circle 040 on reader information card or go to www.metalfinlshing.com/advertisers
June 2009 I metalfinishing I 87