Spot curing system

Spot curing system

NEW. proclucts DuraTEC 100, as part of the Zirconization process, delivers high value in a lean manufacturing environment by providing energy savings ...

1MB Sizes 3 Downloads 78 Views

NEW. proclucts DuraTEC 100, as part of the Zirconization process, delivers high value in a lean manufacturing environment by providing energy savings through a reduction in the heat needed to pretreat parts prior to painting. The improved chemical efficiency of Zirconization results in additional cost savings. The new process helps to protect the environment, serving as a green alternative to traditional iron phosphate by featuring a phosphatefree formula, low-energy consumption, and significantly less sludge. For more information, visit www.duboischemicals.com or e-mail Nina Biermann at [email protected]. CircLe 402 on reader service card

SOLVENT-FREE METAL CORROSION PROTECTION

Using Dynasylan technology, Evonik Degussa Corp. (EDC) has developed

two new solvent-free, water-based innovative systems for metal protection. Dynasylan Hydrosit and SIVO-SOL technologies save time and money while protecting the environment. Dynasylan Hydrosil and SIVO-SOL technologies provide maximum corrosion protection for valuable metal products and simplify the manufacturing process. The environmentally friendly, water-based systems offer an extremely low volatile organic compound (VOC) level and maximum corrosion protection without the use of chromium (VI) in the system. The new products offer protection against abrasion and chemicals, and they also provide

for excellent adhesion of coatings, the company said. In support of the launch, Evonik has unveiled a comprehensive new brochure that provides detailed information about the breakthrough technology in corrosion protection. The full-color brochure spans eight pages. For more information, call (877) 748-3686 or contact EDC via e-mail at [email protected]. Yon can also visit the Dynasylan product website at www.dynasylan.com. CircLe 403 on reader service card

SPOT CURING SYSTEM

The new BlueWave LED visible light, high-intensity spot curing system

B-9 NICKELSTRIPPERS

DURAFL@I,'.' TotalPerformance: membranes, chemistry, service Making Waves in Industrial WastewaterRecycling Duraflow Microfiltration M~nbranee= can filter a 2% slurry without fouling to produce filtrate that is excellent feed for • Reverse Osmoele Water Recycle Unit,

>Membrane life: 3-10 !mars

>Can be cleaned with Acid, Bleach, Peroxide >Duraflow Membranes are made in our state of the art manufacturing facility in T e w l ~ , MA

Tight, mJrrace-mjeating pore steuature as-

Visit us at www.Duraflow.biz

auras:

Duraflow is currently looking for queJifled OEM Technology Integrators who woukl like to have the best

>Better Compliance >Lowest Operating Coq;l=

mlcroffitratlon modules for their water recycle systems.

>Longest runs between ¢le=mlngs Duraflow Corporation 120 Lumber Lane Tewksbu~, MA 01876

Ph: 978-851-0447 Fax: 9780-85%7459

Circle 029 on reader information card or go to www.metaifinishing.com/advertisers

www.metalfinishing.com

The only one-component, non-toxicpowdered immersion nickel strippers on the market, removes nickel from steel, copper, brassand zinc diecast. NO ELECTRICITY• NO CYANIDES NO PHOSPHATES• NO CAUSTICAMINES NO AMMONIA • NO FUMES 5 FORMULATIONS • B-9 Formula removes electrlytic and electroless nickel from steel • B-9 Plus for use by shop operators on all substrates • B-929 Formula strips nickel from zinc diecast, copper, brass, silver and gold with no etching of the softer substrates • B-913 Removes nickel from aluminium with no hydrogen embrittlemnet aftereffects • B-9 Nickel-iron strips nickel-iron alloy from ferrous substrates with no attack • LNS-9 a complete bath for removal of electrolytic nickel from steel. No mixing, weighing or measuring. Simlpy pump LNS-9 liquid into your stripping tank, heat to operate temperature and begin stripping.

~setal x

1213 gnderdown Ave. pecialty Lenoir, NC 28645 ]Products 1-828-758-4997 L,. Fax 1-828-758-5033 Email: [email protected]

Circle 066 on reader information card or go to www.metalfinishing.com/advertisers

June 20081 mete|finishing 197

NEW. proclucts from DYMAX Corp. offers many advantages over traditional UV spot curing systems, including no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours. The BlueWave LED generates light using an array of surface mount LEDs (light-emitting diodes) instead of traditional metal halide or mercury bulbs. The LEDs produce visible light energy in a relatively narrow wavelength band centered at 410 nm, in contrast to a typical broad-band, high-pressure UV bulb (300-500 nm). This system emits a maximum visible light intensity output of more than 2,500 mW/cm2 from an 8-mm diameter light guide, and it allows users to adjust intensity output from 0% to 100%. The relatively narrow band produced by LEDs generates cooler curing temperatures. The BlueWave LED is excellent for spot curing of coatings,

as well as adhesive bonding ofpolycarbonate, PVC, PET, metal, glass, and many other substrates. The BlueWave LED curing system can cure many of DYMAX'svisible light curing adhesives that are currently being produced. The DYMAX Applications Engineering Group can offer adhesive recommendations for assembly processes using the BlueWave LED curing system. For more information, e-mail [email protected] or visit www.dymax.com. Circle 404 on reader service

card

TITANIUM-CLAD COPPER ELECTRODES Metallurgically bonded titaniumclad copper electrodes for chemical processing, electroplating, metal finishing, and metal recovery applications are available from Anomet Products, Inc., of Shrewsbury, Mass. Anomet titanium-clad copper electrodes feature a large OFHC copper core to provide uniform cur-

rent distribution and a metallurgically bonded titanium cladding for optimum corrosion resistance. Ideal for applications requiring high current carrying capacities in extremely corrosive processes, they can withstand extreme thermal cycling and are ductile for shaping and forming. Fully machinable and weldable for connecting, capping, and joining

Make for Superior Liners • Widest Range of Corrosion Resistant Formulations& Gauges in the Industry •

State-of-the-ArtFabrication Techniques MeanTighter Tolerances& Better Fit

• Leading Innovatorin Flexible LiningTechnology

Distributor/InstallerInquiriesWelcome See us at the SUR/FIN 2008 Booth #412

• Liners In ServiceWorld Wide in Fab Shops, Military Bases, NASA, Automotive,Aerospace and CompaniesLikeYours

~ 1 ~

Witt Lining__Systems (800) 3 2 3 - 3 3 3 5 www.wittliners.com Circle 108 on reader information card or go to www.metaffinishing.com/advertisers

June 2008 1metal.finishing 198

(973)

226-6010

Fax: (973) 227-4155 - E-mail: j t i l t o n @ t i l t o n - r n b . c o m 66 Passaic A v e n u e • Fairfield, NJ 07004-3509 CircLe 098 on reader information card or go to www.metalfinishing.com/advertisers

www.metalfinishing.com